SAW Components SAW TX Filter PCS / WCDMA Band II Series/type: Ordering code: B9459 B39192B9459P810 Date: Version: November 13, 2009 2.0 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet Application ■ Low-loss RF filter for mobile telephone ■ ■ ■ ■ PCS and WCDMA systems, transmit path (TX) High selectivity Usable passband 60 MHz Impedance at input and output 50 Ω Unbalanced to unbalanced operation 0,25 2 3 bottom view 1 5 4 0,5 0,5 0,4 Package size 1.4 x1.1 x 0.4 mm3 Package code QCS5U RoHS compatible Approximate weight 0.003 g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) 0,325 ■ ■ ■ ■ ■ ■ ■ 0,575 Features side view 1,1 1,4 top view Pin configuration ■ 1 ■ 4 ■ 2,3,5 Input unbalanced Output unbalanced To be grounded Please read cautions and warnings and important notes at the end of this document. 2 1 4 2,5 3 November 13, 2009 SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet Characteristics Temperature range for specification: Terminating source impedance: Terminating load impedance: T = –30 ˚C to +85 ˚C ZS = 50 Ω ZL = 50 Ω –– B9459 typ. @ 25 ˚C 1880.0 Maximum insertion attenuation 1850.625...1909.375 MHz αmax @fCarrier 1852.4 ...1907.6 MHz αWCDMA2) –– –– 2.6 2.5 3.81) 3.5 dB dB Amplitude ripple (p-p) 1850.625...1909.375 MHz ∆α –– 1.3 2.9 dB –– 1.5 4.5 % 1850.625...1909.375 MHz –– 1.9 2.2 Output VSWR 1850.625...1909.375 MHz –– 1.9 2.2 32 35 30 14 334) 34 35 35 30 35 25 36 37 35 18 36 37 38 38 35 47 35 –– –– –– –– –– –– –– –– –– –– –– min. Center frequency fC max. –– MHz Magnitude3) Error Vector @fCarrier 1852.4 ...1907.6 MHz EVM Input VSWR Attenuation @fCarrier 1) 2) 3) 4) 0.0 ...1550.0 1550.0 ...1580.0 1580.0 ...1770.0 1770.0 ...1830.0 1930.625...1990.0 1932.4 ...1987.6 1990.0 ...2032.0 2032.0 ...2500.0 2500.0 ...3700.0 3700.0 ...3820.0 3820.0 ...6000.0 α MHz MHz MHz MHz MHz MHz αWCDMA2) MHz MHz MHz MHz MHz dB dB dB dB dB dB dB dB dB dB dB Valid in temperature range -20˚C to +75˚C. Specified for +85˚C: 4.2dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (4). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Valid in temperature range -20˚C to +85˚C. Specifieded for -30˚C: 30dB Please read cautions and warnings and important notes at the end of this document. 3 November 13, 2009 SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for Passband, fCarrier ranges from 1852.4 MHz (lowest Tx channel) to 1907.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) 2 df = 1 Maximum ratings Operable temperature range Storage temperature range DC voltage ESD voltage Input power 1) T Tstg VDC VESD PIN –40/+85 –40/+85 5 501) 15 ˚C ˚C V V dBm machine model, 10 pulses WCDMA-Signal acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Please read cautions and warnings and important notes at the end of this document. 4 November 13, 2009 SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet Transfer function for CW signals Transfer function (wideband) Please read cautions and warnings and important notes at the end of this document. 5 November 13, 2009 SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet Transfer function for WCDMA signals (Powertransferfunction vs. carrier frequency) Transfer function for WCDMA signals (Powertransferfunction vs. carrier frequency) Please read cautions and warnings and important notes at the end of this document. 6 November 13, 2009 SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet Smith charts Unbalanced input (pin1) Unbalanced output (pin4) Please read cautions and warnings and important notes at the end of this document. 7 November 13, 2009 SAW Components B9459 1880.0 MHz SAW TX Filter Data sheet References Type B9459 Ordering code B39192B9459P810 Marking and package C61157-A8-A14 Packaging F61074-V8237-Z000 Date codes L_1126 B9459_NB.s2p S-parameters B9459_WB.s2p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2009. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 8 November 13, 2009 Important notes The The following following applies applies to to all all products products named named in in this this publication: publication: 1. 1. 2. 2. 3. 3. 4. 4. 5. 5. 6. 6. 7. 7. Some Some parts parts of of this this publication publication contain contain statements statements about about the the suitability suitability of of our our products products for for certain areas of application. These statements are based on our knowledge certain areas of application. These statements are based on our knowledge of of typical typical requirements requirements that that are are often often placed placed on on our our products products in in the the areas areas of of application application concerned. concerned. We We nevertheless expressly point out that such statements cannot be regarded nevertheless expressly point out that such statements cannot be regarded as as binding binding statements statements about about the the suitability suitability of of our our products products for for aa particular particular customer customer application. application. As a rule, EPCOS is either unfamiliar with individual customer applications As a rule, EPCOS is either unfamiliar with individual customer applications or or less less familiar familiar with them than the customers themselves. For these reasons, it is always with them than the customers themselves. For these reasons, it is always ultimately ultimately incumbent incumbent on on the the customer customer to to check check and and decide decide whether whether an an EPCOS EPCOS product product with with the the properties described in the product specification is suitable for use in a particular customer properties described in the product specification is suitable for use in a particular customer application. application. We We also also point point out out that that in in individual individual cases, cases, aa malfunction malfunction of of electronic electronic components components or or failure before the end of their usual service life cannot be completely ruled failure before the end of their usual service life cannot be completely ruled out out in in the the current current state state of of the the art, art, even even ifif they they are are operated operated as as specified. specified. In In customer customer applications applications requiring a very high level of operational safety and especially in customer requiring a very high level of operational safety and especially in customer applications applications in in which which the the malfunction malfunction or or failure failure of of an an electronic electronic component component could could endanger endanger human human life life or or health health (e.g. (e.g. in in accident accident prevention prevention or or life-saving life-saving systems), systems), itit must must therefore therefore be be ensured ensured by by means of suitable design of the customer application or other action taken by the means of suitable design of the customer application or other action taken by the customer customer (e.g. (e.g. installation installation of of protective protective circuitry circuitry or or redundancy) redundancy) that that no no injury injury or or damage damage is is sustained sustained by third parties in the event of malfunction or failure of an electronic component. by third parties in the event of malfunction or failure of an electronic component. The The warnings, warnings, cautions cautions and and product-specific product-specific notes notes must must be be observed. observed. In order to satisfy certain technical requirements, some of the In order to satisfy certain technical requirements, some of the products products described described in in this this publication may contain substances subject to restrictions in certain jurisdictions publication may contain substances subject to restrictions in certain jurisdictions (e.g. (e.g. because because they they are are classed classed as as hazardous). hazardous). Useful Useful information information on on this this will will be be found found in in our our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more more detailed detailed questions, questions, please please contact contact our our sales sales offices. offices. We constantly strive to improve our products. We constantly strive to improve our products. Consequently, Consequently, the the products products described described in in this this publication may change from time to time. The same is true of the corresponding product publication may change from time to time. The same is true of the corresponding product specifications. specifications. Please Please check check therefore therefore to to what what extent extent product product descriptions descriptions and and specifications specifications contained in this publication are still applicable before or when you place an contained in this publication are still applicable before or when you place an order. order. We We also also reserve reserve the the right right to to discontinue discontinue production production and and delivery delivery of of products. products. ConseConsequently, we cannot guarantee that all products named in this publication quently, we cannot guarantee that all products named in this publication will will always always be be available. available. The The aforementioned aforementioned does does not not apply apply in in the the case case of of individual individual agreements agreements deviating deviating from from the the foregoing foregoing for for customer-specific customer-specific products. products. Unless otherwise agreed Unless otherwise agreed in in individual individual contracts, contracts, all all orders orders are are subject subject to to the the current current version of the “General Terms of Delivery for Products and Services in the version of the “General Terms of Delivery for Products and Services in the Electrical Electrical Industry” Industry” published published by by the the German German Electrical Electrical and and Electronics Electronics Industry Industry Association Association (ZVEI). (ZVEI). The The trade trade names names EPCOS, EPCOS, BAOKE, BAOKE, Alu-X, Alu-X, CeraDiode, CeraDiode, CSMP, CSMP, CSSP, CSSP, CTVS, CTVS, DSSP, DSSP, MiniBlue, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PhiCap, SIFERRIT, SIFERRIT, SIFI, SIFI, SIKOREL, SIKOREL, SilverCap, SilverCap, SIMDAD, SIMDAD, SIMID, SIMID, SineFormer, SineFormer, SIOV, SIOV, SIP5D, SIP5D, SIP5K, SIP5K, ThermoFuse, ThermoFuse, WindCap WindCap are are trademarks trademarks registered registered or or pending pending in in Europe Europe and and in in other other countries. countries. Further Further information information will will be be found found on on the the Internet Internet at at www.epcos.com/trademarks. www.epcos.com/trademarks. 9 November 13, 2009