LINEAR AND ROTARY POSITION Encoders 510 Series, Mechanical 600 Series, Optical The 510 Series controls are manually operated, rotary, mechanical encoders that provide a two-bit gray code for relative reference applications and a fourbit gray code for absolute electrical reference applications. The “L” channel leads the “R” channel by 90° electrically in the CW position. It features continuous electrical travel and has a rotational life of more than 100,000 shaft revolutions with a positive detent feel. The 600 Series controls are manually operated, rotary, optical encoders that output two square waves in quadrature at a rate of 128 pulse per channel per revolution as a standard with other resolutions down to 60 pulses available. The outputs are TTL compatible. PC terminals or cable leads are available. This series is small-sized, 21,08 mm2 by 8,71 mm deep (0.83 in2 x 0.343 in) long and commonly used in limited-space, panel-mounted applications where the need for costly, front-panel displays can be completely eliminated. Digital gray-code outputs eliminate the need for A/D converters. Pulses per revolution: 128 Supply voltage: 5.0 V Body: 34,93 mm (1.375 in) Ø Shaft: 6.35 mm [0.25 in] dia by 22.23 mm [0.875] long Bushing: 9,52 mm [0.375 in] dia by 9,52 mm [0.375 in] long Operating temperature: -40 °C to 65 °C (-40 °F to 149 °F) Revolutions: 10 million Bushing: 9,52 mm (0.375 in) Ø x 6,35 mm (0.25 in) L Shaft: Flatted, 6,35 mm (0.25 in) Ø x 19,05 mm (0.75 in) L Body: 21,08 mm (0.830 in) square Operating temperature: -40 °C to 105 °C (-40 °F to 221 °F) Rotational cycles: 100,000 1,91 [0.075] 17,5 [0.69] 0,64 x 3,05 12,2 [0.48] “A” 12 34 [0.025 x 0.012] 1,27 typ. [0.05 Typ.] OPTIONS Series 600 TERMINATION 177,8 mm (7.0 in) long cable PC terminals exiting side PC terminals exiting rear 177,8 mm (7.0 in) long cable with connector REFERENCE 600EN-128-CBL 600EN-128-B66 600EN-128-C24 600EN-128-CN1 OPTIONS Vertical Mount, PC Terminals/bent back GREY CODE OPTIONS 2 bit/4 cycles 2 bit/6 cycles 2 bit/9 cycles 4 bit/16 cycles REFERENCE 510E1A48F204PC 510E1A48F206PC 510E1A48F209PC 510E1A48F416PC Horizontal Mount, PC Terminals/straight GREY CODE OPTIONS 2 bit/4 cycles 2 bit/6 cycles 2 bit/9 cycles 4 bit/16 cycles REFERENCE 510E1A48F204PB 510E1A48F206PB 510E1A48F209PB 510E1A48F416PB Brackets MOUNTING DIRECTION Vertical Horizontal REFERENCE 510VBKT 510HBKT www.honeywell.com/sensing 117