MACOM 185027-1

Statement of Compliance
Requested Part
19 August 2013
185027-1
(Part 1 of 1)
JPT REC FOR 1 WIRE SEAL
Part Status:
EU RoHS/ELV Code:
Active
Always EU RoHS/ELV Compliant
Solder Process Capability Code:
Not reviewed for solder process capability
China RoHS:
Not reviewed for China RoHS compliance
Exemptions:
Exemption Details Currently Unavailable
REACH Oct 2008 SvHC Compliance:
Contains no REACH October 2008 SvHC(s)
REACH Jan/Mar 2010 SvHC Compliance:
Contains no REACH Jan/Mar 2010 SvHC(s)
REACH June 2010 SvHC Compliance:
Contains no REACH June 2010 SvHC(s)
REACH Dec 2010 SvHC Compliance:
Contains no REACH December 2010 SvHC(s)
REACH June 2011 SvHC Compliance:
Not reviewed for REACH June 2011 SvHC(s)
REACH December 2011 SvHC Compliance:
REACH June 2012 SvHC Compliance:
REACH December 2012 SvHC Compliance:
REACH June 2013 SvHC Compliance:
Halogen Content:
Not reviewed for REACH December 2011 SvHC(s)
Not reviewed for REACH June 2012 SvHC(s)
Not Reviewed for REACH December 2012 SvHC(s)
Not Reviewed for REACH June 2013 SvHC(s)
Low Halogen - Br, Cl, F, I < 900 ppm per homogenous
material. Also BFR/CFR/PVC Free
David R. Bender
Director, Product Compliance
The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead,
hex chrome, mercury, PBB, PBDE, and 0.01% for cadmium, or qualify for an exemption to above limits as defined in the Annexes of Directive
2011/65/EU (RoHS2). Note that any exemptions taken in this case would not include application specific exemptions (e.g. lead in solder for servers) as
TE cannot determine where component products will be used.
Additionally, the part numbers that are identified as 5 of 6 compliant meet the material limits described above, except that these products have lead in
the solderable interface only. These products may be suitable for use in an application that has an exemption for the use of lead in solder (e.g. servers,
network infrastructure, etc).
Finished electrical and electronic products will be CE marked as required by Directive 2011/65/EU (RoHS2). Components may not be CE marked.
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information
provided by our suppliers. This information is subject to change.
Page 1 of 1