MACOM 61312-2

Machine Applied Terminations,
Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Catalog 82227 Revised 8-04
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Crimp Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Terminal Stud Hole Size . . . . . . . . . . . . . . . . . . . . . . . . . 5, 6
Description of UL 468A Test Procedures
and Requirements for Terminals . . . . . . . . . . . . . . . . . . . 7
Ring Tongue Terminals
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Insulation Support . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-15
Non-Insulation Support . . . . . . . . . . . . . . . . . . . . . . 16-18
Insulation Piercing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
AMPLIVAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Spade Tongue Terminals
Insulation Support . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23
Non-Insulation Support . . . . . . . . . . . . . . . . . . . . . . . . . 24
Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Insulation Piercing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Spring Spade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Flag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Splices
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Non-Insulation Support — Side Feed . . . . . . . . . . . . . . 27
Non-Insulation Support — End Feed . . . . . . . . . . . . . . 28
Insulation Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Insulation Piercing — End Feed . . . . . . . . . . . . . . . . . . 29
Identification Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
RTM Crimpband Splices
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
20 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
14 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
10 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
9 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
7 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-36
6 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3 Ridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
MTM Crimpband Splices
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 40
11 Serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
9 Serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
7 Serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
AMPLIVAR Splices
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-45
9 Serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7 Serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46, 47
5 Serrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47, 48
Miniature Splice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Subminiature Splice . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
AMPLIVAR Tooling . . . . . . . . . . . . . . . . . . . . . . . . . 49, 50
Pins, Receptacles, Tab and Taper Tab
Receptacles Terminals
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Pin Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Receptacle Terminals . . . . . . . . . . . . . . . . . . . . . . . . 53-55
SHUR-PLUG Terminals
.156 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
.180 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SHUR-PLUG Receptacle Terminals
.156 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
.180 Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Tab Receptacle Terminals . . . . . . . . . . . . . . . . . . . . . . . 58
Taper Tab Receptacle Terminals
78 Series Insulation Support . . . . . . . . . . . . . . . . . . . . . 59
78 Series Insulation Piercing . . . . . . . . . . . . . . . . . . . . . 59
98 Series Insulation Support . . . . . . . . . . . . . . . . . . . . . 59
Contact and Welding Tab Terminals
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Miscellaneous Contacts and Weld Tabs. . . . . . . . . . . . 61
Brush Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Button Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Grounding Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Miscellaneous Terminals
Tab Receptacles — Special . . . . . . . . . . . . . . . . . . . . . 64
Plug Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Fuse Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Wire Strain Relief Clamps . . . . . . . . . . . . . . . . . . . . . . . 65
Spark Plug Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . 65
Thermal Protector Crimp Pin . . . . . . . . . . . . . . . . . . . . . 65
Wire Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66, 67
AMPLIVAR Wire Pins with Insulation Support . . . . . . . . 68
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-74
2
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Introduction
Tin Plated
Need more information?
Allowable Connection
Temperature: 110°C
Call Technical Support at
the numbers listed below.
Tin plated phosphor bronze
for higher temperatures;
additional corrosion protection over plain phosphor
bronze.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics products. They can provide you
with:
Brass
Silver Plated
■
Technical support
Plain
Allowable Connection
Temperature: 130°C
■
Catalogs
■
Technical Documents
Operating Temperatures of
Materials and Finishes
Brass, phosphor bronze and
steel are the normal materials for Tyco Electronics
terminals. Various finishes
are available.
Allowable Connection
Temperature: 110°C.
Tin Plated
Silver plated connections
allow the highest operating
temperature for phosphor
bronze and higher current
carrying capacity than plain
and tin plated phosphor
bronze.
Allowable Connection
Temperature: 110°C.
Steel
Plain brass is used frequently, where applications
have optional environmental
conditions.
Tin plating of receptacle
and tab creates satisfactory
operation at higher temperatures, and in addition protects the connection against
corrosion.
Silver Plated
Allowable Connection
Temperature: 130°C
Silver plated connections
allow the highest operating
temperature for brass and a
higher current carrying
capacity than plain and tin
plated brass.
Phosphor Bronze
Plain
Allowable Connection
Temperature: 110°C
Phosphor bronze is used in
applications where brass
would normally be corroded, for example the various freezing mixtures and
ammonias.
Nickel plated
Allowable Connection
Temperature: 250°C
This combination allows a
reliable connection at high
temperatures, for example
in stoves, cooking appliances, etc. To assure optimum performance, these
nickel-plated receptacles
are used with compatible
lead wires and wires and
tabs that can be welded to
heating units.
Many part numbers are
recognized under the
Component Program
of Underwriters
Laboratories, Inc.,
File No. E13288 and
File No. LR 7189.
Certified by
Canadian Standards
Association.
Contact Tyco Electronics
customer service for a
specific part number inquiry.
■
Product Samples
■
Tyco Electronics
Authorized Distributor
Locations
Instant Information by the
Tyco Electronics FAX Service
24 hours a day…
Call Technical Support and
choose the Tyco Electronics
FAX service option at the
voice prompt. The information you request will be
faxed to you within a
few minutes. From the
Tyco Electronics FAX
service you get:
■
Drawings (the drawing
number in this case is the
part number)
■
Instruction Sheets
■
Product Specifications
■
Latest Revisions of Catalog
Pages. (You will be
prompted to enter any part
number on the old catalog
page. The Tyco Electronics
FAX service will then fax you
the latest catalog page(s)
covering this part.
■
The list of your closest
distributors
■
Instructions on how to
use the Tyco Electronics
FAX service
R
R
© Copyright 1989, 1995 and 2004 by
Tyco Electronics Corporation. All
International Rights Reserved.
AMP, AMPLIVAR, AMP-O-LECTRIC,
AMPOMATOR, SHUR-PLUG, and TYCO
are trademarks.
Specifications subject to change.
Consult Tyco Electronics for latest
design applications.
3
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Crimp Configuration Specifications
AMPLIVAR
Standard “F”
Insulation Piercing
Open Barrel
Contacts
Contacts
Pins
Splices
Pins
The basic design of the
AMPLIVAR Terminals
encompasses two main
areas, the burrs at the top
of the serrations and the
serrations themselves.
During the crimping operation the burrs pierce the
insulation of the magnet
wire and extrude the bare
conductors into the serrations—creating intimate
metal contact.
In a one-step operation the
magnet wire is automatically
multiple ring stripped of its
insulation as it is forced into
the serrations during the
precisely controlled crimp.
The resulting termination
produces a high tensile
strength, air sealed connection that is as resistant to
corrosion as the insulated
conductor.
In the standard “F” crimp
design, the open barrel
consists of two wings that
are wrapped around the
conductor strands and
butted together in a tight
seam. Applied with MatchMated tooling, the “F” Crimp
offers the optimum combination of mechanical
strength and electrical
conductivity. This method
of termination also assures
maximum resistance to
vibration and corrosion.
The insulation support
feature was developed by
Tyco Electronics for applications where vibration tends
to be excessive. This design
offers the same fine quality
characteristics found in the
standard line plus firm, fully
circumferencial support to
the wire insulation.
The insulation piercing line
enjoys a durable popularity
with electrical circuitry manufacturers because of the
simplicity of attachment.
The barrel contains two perpendicular lances that drive
through the wire insulation
to make contact with the
conductor within.
Tensile characteristics vary,
depending on the type of
wire insulation. Because the
barrel wraps around the
insulation, it deters insulation fraying. The insulation
piercing line is a low cost,
high speed attachment suitable for many requirements.
In general, insulation piercing terminals can be used
where high currents, intensive vibration and mechanical loads are not critical
factors on both stranded
and tinsel wire.
4
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Terminal Stud Hole Size
Use to Select Proper Size
Terminal
Stud Size
U.S. Cust.
Metric
Stud Dia.
Minimum Terminal
Hole Diameter
The chart shows sizes and
dimensions of various studs
and the corresponding terminal stud hole sizes used
with Tyco Electronics
devices.
#0
.060
.064
#1
.073
.077
.086
.090
For example, with stud #5
(.125 Diameter), use
Tyco Electronics device
listed for #5 stud (.129 Hole
Diameter).
#3
.099
.103
#4
.112
.116
Terminal stud hole sizes
may easily be checked by
fitting sample terminal to
black circle.
#2
M2
#5
M3
.125
.129
#6
M3.5
.138
.142
#8
M4
.164
.168
#10
.190
.194
#12
.216
.220
#14
.242
.247
1/4″
M6
.250
.260
5/16″
M8
.312
.323
3/8″
.375
.385
7/16″
.437
.448
.500
.510
1/2″
M12
5
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Terminal Stud Hole Size (Continued)
Stud Size
U.S. Cust.
Metric
Stud Dia.
Minimum Terminal
Hole Diameter
.625
.651
.750
.776
.875
.901
1″
1.000
1.026
1-1/8″
1.125
1.151
1-1/4″
1.250
1.276
5/8″
M16
3/4″
7/8″
M22
6
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Description of UL 486A Test Procedures and Requirements for Terminals
Wire Size Range
Pullout Test Requirements
AWG 22 to 2
Terminal must not be separate from wire when
subjected to the listed load for one minute.
Wire Size
AWG
22
20
18
16
14
12
10
8
6
4
2
Test Sequences
Test Group 1
Mechanical Sequence
1. Secureness
2. Pullout
Test Group 2
Mechanical Sequence
1. Secureness
2. Static Heat
3. Pullout
Static Heat Test Requirements
Wire Size
AWG
22
20
18
16
14
12
10
8
6
4
2
Pullout
Force (lbs.)
8
13
20
30
50
70
80
90
100
140
180
Test Current
(Amperes)
9
12
17
18
30
35
50
70
95
125
170
Requirement:
Connector temperatures must not exceed the ambient temperature plus 50°C [90°F] after stability is
attained.
Note: Testing conducted on non-plated
copper wire with UL approved insulation.
Stability:
A test sample is considered to have attained a stable
temperature when three readings taken at not less
than 10 minute intervals show no more than a 2°C
[3.6°F] variation between any two readings.
Stationary
Mounting
Fixture
Height
(From Bushing
To Wire)
Test Terminal
Bushing
Secureness Test Requirements
Wire Size
AWG
18 -16
14
12 -10
8
6
4
2
Bushing
Dia.
Height
Weight
(lbs.)
1/4
3/8
3/8
3/8
1/2
1/2
9/16
10 1/4
11
11
11
11 3/4
11 3/4
12 1/2
2
3
5
8
18
30
30
Note: Test Duration = 30 Minutes
Arm rotates
in a circular motion
on the horizontal
plane at 9 RPM.
Circular motion
has a diameter
of 3 inches.
Weight
7
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Introduction
Open Barrel Rings and Spades
Product Facts
■
Reproducible crimping
results
■
High quality
■
Reduced manufacturing
costs
■
No soldering required
■
Proven crimp technology
■
Large range of product
configurations
■
Excellent mechanical and
electrical performance
■
Recognized under the
Component Recognition
Program of
Underwriters
Laboratories Inc.,
File No. E13288, unless
otherwise specified
R
■
Certified by Canadian
Standards
Association,
File No. LR 7189, unless
otherwise specified
Applications
■
Appliances
■
Machine tools
■
Automotive
R
Tyco Electronics open barrel rings and spades are
manufactured in strip form
and supplied on reels for
Automachine termination. In
the standard “F” crimp configuration, the open barrel
consists of two “U” shaped
wings that are crimped
around the conductor
strands and butted together
into a tight seam. The
crimping action of the
Tyco Electronics application
equipment is a precise
operation that creates the
proper crimp with each
cycle of the machine. This
ensures uniformity of all the
crimp terminations.
The insulation support was a
Tyco Electronics developed
feature for applications
where vibration tends to be
excessive. The insulation
support consists of two
additional “U” shaped
wings which are wrapped
around the wire insulation.
This prevents harmful flexing of the wire at the termination point where the wire
is rigidly crimped to the wire
barrel and deters fraying of
the insulation. Because it
increases the already signif-
icant tensile strength of
the conductor crimp, the
vibration resistance is
great enough for more
severe applications.
Tyco Electronics Open
Barrel Rings and Spades
are designed for wire sizes
ranging from 28 AWG to
6 AWG. They come in a
variety of stud sizes. These
terminals are made from a
variety of base materials
and platings depending on
your application (i.e. ambient temperature, humidity,
and chemical exposure).
To help you choose the
Tyco Electronics product
best suited to your requirements, the following information about each terminal
is shown in tabular form:
wire size range, insulation
diameter, stud size, stock
thickness, type of base
material, plating and
physical dimensions.
Tyco Electronics has standardized the product listed
in this catalog section. If you
do not see a terminal to fit
your application, please contact your Tyco Electronics
Sales Engineer.
Open Barrel Insulation
Piercing Terminals
The insulation piercing line
of terminals enjoys popularity because of the simplicity
of termination. The barrel
contains two perpendicular
lances that are driven
through the wire insulation
to make contact with the
conductor. Consequently,
wire stripping is eliminated
and a one step circuitry termination is accomplished.
Tensile characteristics vary,
depending on the type of
wire insulation. Since the
barrel wraps around the
insulation, it deters insulation fraying. The insulation
piercing line is a low-cost,
high-speed termination, suitable for many applications.
In general, insulation
piercing terminals can be
used on both stranded and
tinsel wire, where high
currents, intense vibration
and mechanical loads are
not critical factors.
8
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals, Insulation Support
C
Circular With Serrations
E
Square Tongue
B
Circular Without Serrations
Type
E
Wire Range
AWG
mm2
26-24
0.12–0.6
Insul.
Size
.035–.065
0.89–1.65
.040–.060
1.02–1.52
B
26-22
0.12–0.4
.070–.110
1.78–2.79
D
26-20
0.12–0.6
.048–.078
1.22–1.98
Stock
Thk.
.065
1.65
.094
2.39
.100
2.54
.012
0.31
.012
0.31
.014
0.36
.014
0.36
.016
0.41
.016
0.41
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.014
0.36
.014
0.36
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.030
0.76
.030
0.76
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.100
2.54
.100
2.54
.142
3.61
4
.080–.100
2.03–2.54
6
8
10
A
24-20
6
0.2–0.6
10
.048–.078
1.22–1.98
8
10
12
B
C
22-20
22-18
0.3–0.6
0.3–0.9
.070–.120
1.78–3.05
.050–.110
1.27–2.79
.100–.150
2.54–3.81
.060–.110
1.52–2.79
.070–.100
1.78–2.54
.126
3.20
.120
3.05
6
.120
3.05
6
8
5/16″
1/4″
4
A
22-18
6
0.3–0.9
.080–.110
2.03–2.79
8
8
10
10
.120–.170
3.05–4.32
D
Flat Sided
Stud Size/
Dia.
4
8
Material
and Finish
Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Nickel Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Nickel Plated Steel
W
.156
3.96
.156
3.96
.190
4.83
.190
4.83
.190
4.83
.190
4.83
.250
6.35
.290
7.37
.290
7.37
.290
7.37
.290
7.37
.250
6.35
.300
7.62
.312
7.93
.312
7.93
.312
7.93
.210
5.33
.210
5.33
.210
5.33
.210
5.33
.296
7.52
.296
7.52
.468
11.89
.468
11.89
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
Dimensions
L
E
.375
.295
9.53
7.49
.375
.295
9.53
7.49
.425
.330
10.80
8.38
.425
.330
10.80
8.38
.455
.365
11.56
9.27
.456
.365
11.58
9.27
.565
.444
14.35
11.28
.630
.485
16.00
12.32
.630
.485
16.00
12.32
.630
.485
16.00
12.32
.630
.485
16.00
12.32
.590
.440
14.99
11.18
.590
.440
14.99
11.18
.770
.615
19.56
15.62
.770
.615
19.56
15.62
.770
.615
19.56
15.62
.460
.355
11.68
9.02
.532
.427
13.51
10.85
.532
.427
13.51
10.85
.532
.427
13.51
10.85
.642
.494
16.31
12.55
.642
.494
16.31
12.55
.982
.748
24.94
19.00
.982
.748
24.94
19.00
.662
.514
16.81
13.06
.662
.514
16.81
13.06
.662
.514
16.81
13.06
.662
.514
16.81
13.06
.662
.514
16.81
13.06
.662
.514
16.81
13.06
.637
.494
16.18
12.55
C
.109
2.77
.109
2.77
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.237
6.02
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.220
5.59
.220
5.59
.405
10.29
.405
10.29
.405
10.29
.135
3.43
.135
3.43
.135
3.43
.135
3.43
.234
5.94
.234
5.94
.437
11.10
.437
11.10
.234
5.04
.234
5.04
.234
5.04
.234
5.04
.234
5.04
.234
5.04
.234
5.04
Part
Number
61652-1
61653-1
60007-2
42547-2
61312-1
61312-2
60123-2
41579
41580
41581
41582
60553-1
60555-1
42508-2
42164-2
63721-1
62638-1
109453-1
109453-3
109454-1
40697
40698
41013
41711
63797-1
42037
42036-1
42037-1
42036-2
42037-2
485003-1
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Ring Tongue Terminals
A
With Serrations
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
9
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals
Ring Tongue Terminals, Insulation Support (Continued)
C
W
E
L
D
Stud Retaining
Type
E
Extruded
Wire Range
AWG
mm2
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
10
.014
0.36
.020
0.51
.025
0.69
.025
0.69
.025
0.69
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
D
24-20
0.2–0.6
E
20-18
0.5–0.9
.045–.080
1.14–2.03
.075–.110
1.91–2.79
0.3–0.9
.080–.120
2.03–3.05
10
8
F
22-18
8
10
6
G
22-16
0.3–1.4
F
Anti-Rotational
.100–.140
2.54–3.56
.105
2.67 Max..
.177
4.50
.177
4.50
.177
4.50
.261
6.63
.177
4.50
Material
and Finish
G
Stud Retaining
W
.375
9.53
.335
8.51
.370
9.40
.370
9.40
.370
9.40
.370
9.40
.370
9.40
.370
9.40
.370
9.40
.455
11.56
.370
9.40
Tin Plated Brass
Tin Plated Brass
Tin Plated Steel
Nickel Plated Steel
Tin Plated Steel
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Steel
Tin Plated Brass
Brass
Dimensions
L
E
.634
.447
16.11
11.35
.650
.468
16.51
11.89
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.805
.587
20.45
14.91
.772
.587
19.61
14.91
C
.250
6.35
.205
5.21
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
Part
Number
61705-1
40894
640204-1
640204-2
640271-1
61588-1
61436-1
61436-2
61556-1
61283-1
350509-1
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
C
A
With Serrations
C
“D” Shape
B
Circular Without Serrations
Type
D
20-16
0.5–1.4
C
20-16
0.5–1.4
A
20-16
0.5–1.4
B
20-16
0.5–1.4
A
20-16
0.5–1.4
E
20-16
0.5–1.4
B
10
Wire Range
AWG
mm2
20-16
0.5–1.4
Stud Size/
Dia.
Stock
Thk.
.075–.120
1.91–3.05
.075–.120
1.91–3.05
.100–.140
2.54–3.56
.075–.110
1.91–2.79
.100–.140
2.54–3.56
.080–.120
2.03–3.05
.080–.120
2.03–3.05
.090–.120
2.29–3.05
.100–.135
2.54–3.43
.100–.135
2.54–3.43
.100–.135
2.54–3.43
6 x 20
Screw
.020
0.51
.020
0.51
.030
0.76
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
10
.099
2.52
8
10
12
6
4
.156
3.96
.156
3.96
E
Without Serrations
D
Grounding
Insul.
Size
8
E
L
W
Material
and Finish
Stainless Steel
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
W
.270
6.86
.270
6.86
.342
8.67
.246
6.25
.342
8.69
.342
8.69
.342
8.69
.230
5.59
.230
5.59
.246
6.25
.246
6.25
Dimensions
L
E
.590
.468
14.99
11.89
.603
.468
15.32
11.89
.784
.613
19.91
15.57
.460
.352
11.68
8.94
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.460
.352
11.68
8.94
.460
.352
11.68
8.94
.467
.352
11.86
8.94
.467
.352
11.86
8.94
C
.218
5.54
.218
5.54
.312
7.93
.165
4.19
.312
7.93
.312
7.93
.312
7.93
.165
4.19
.165
4.19
.165
4.19
.165
4.19
Part
Number
61904-1
40888
40955
41406
41456
160102-2
160108-2
61764-1
61386-1
41471
41472
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals, Insulation Support (Continued)
Type
Wire Range
AWG
mm2
C
20-16
0.5–1.4
B
20-16
0.5–1.4
C
20-16
0.5–1.4
A
20-16
0.5–1.4
C
20-16
0.5–1.4
A
A
B
A
D
20-16
18-14
18-14
18-14
18-14
0.5–1.4
0.8–2.0
0.8–2.0
0.8–2.0
0.8–2.0
B
Circular Without Serrations
C
Flat Sided
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
.075–.110
1.91–2.79
.075–.110
1.91–2.79
.075–.110
1.91–2.79
.100–.140
2.54–3.56
.080–.120
2.03–3.05
.080–.120
2.03–3.05
.080–.120
2.03–3.05
.100–.140
2.54–3.56
.110–.140
2.79–3.56
.100–.140
2.54–3.56
.100–.140
2.54–3.56
.100–.140
2.54–3.56
.100–.140
2.54–3.56
.100–.140
2.54–3.56
.100–.140
2.54–3.56
.120–.170
3.05–4.32
.120–.170
3.05–4.32
.120–.170
3.05–4.32
.099
2.52
.132
3.35
.099
2.52
.025
0.64
.025
0.64
.025
0.64
.030
0.76
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.020
0.51
.020
0.51
.020
0.51
Brass
10
2
1/4″
1/4″
10
6
6
8
8
12
10
10
6
6
.194
4.93
Brass
Tin Plated Brass
Br. Tin Plated Brass
Nickel Plated Steel
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Pre-Ni Plated Steel
Brass
W
.204
5.18
.246
6.25
.185
4.70
.342
8.69
.256
6.50
.468
11.89
.468
11.89
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.296
7.52
.296
7.52
.335
8.51
Ring Tongue Terminals
A
With Serrations
D
Extruded
Dimensions
L
E
.460
.352
11.68
8.94
.460
.352
11.68
8.94
.460
.352
11.68
8.94
.784
.612
19.91
15.54
.935
.748
23.75
19.00
.982
.748
24.94
19.00
.982
.748
24.94
19.00
.764
.593
19.41
15.06
.764
.593
19.41
15.06
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.784
.613
19.91
15.57
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.650
.468
16.51
11.89
C
.165
4.19
.165
4.19
.165
4.19
.312
7.92
.437
11.10
.437
11.10
.437
11.10
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.234
5.94
.234
5.94
.205
5.21
Part
Number
42065
42721-1
63514-1
640008-1
640082-1
60700-3
60700-2
60394-1
42933-2
40723
40660
40724
63872-1
40661
40725
41558*
41558-1*
60546-1
*Not recommended for 2 wires.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
11
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals
Ring Tongue Terminals, Insulation Support (Continued)
A
With Serrations
Type
Wire Range
AWG
mm2
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
6
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.025
0.51
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
Brass
6
.105–.170
2.67–4.32
8
8
10
10
2
6
8
8
.120–.170
3.05–4.32
8
8
10
A
18-14
10
0.8–2.0
10
.085–.150
2.16–3.81
1/4″
8
.100–.140
2.54–3.56
10
1/4″
.120–.160
3.05–4.07
10
10
6
6
.100–.140
2.54–3.56
8
8
10
10
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Phos. Brz.
Brass
Pre-Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
W
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.296
7.52
.473
12.01
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.295
7.49
.295
7.49
.295
7.49
.295
7.49
.295
7.49
.295
7.49
Dimensions
L
E
.677
.529
17.20
13.44
.677
.529
17.20
13.44
.677
.529
17.20
13.44
.677
.529
17.20
13.44
.677
.529
17.20
13.44
.677
.529
17.20
13.44
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
.640
.494
16.26
12.55
1.016
.780
25.81
19.81
.782
.612
19.89
15.55
.783
.612
19.89
15.55
.783
.612
19.89
15.55
.789
.618
20.04
15.70
.789
.618
20.04
15.70
.734
.586
18.64
14.88
.734
.586
18.64
14.88
.734
.586
18.64
14.88
.734
.586
18.64
14.88
.734
.586
18.64
14.88
.734
.586
18.64
14.88
C
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.234
5.94
.469
11.91
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.305
7.75
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
Part
Number
109452-1
109452-2
109452-3
109452-4
109452-5
109452-6
63750-1
41330*
41559*
63678-2 †
41332*
1217160-1
41560*
63628-1 †
41333*
626034-2
60024-2
60433-2
60625-1
60744-1
60744-2
60770-1
60770-2
60771-1
60771-2
60772-1
60772-2
* Not recommended for 2 wire applications.
† Recommended for 2 wire applications.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
12
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals, Insulation Support (Continued)
B
Circular Without Serrations
Type
A
E
Wire Range
AWG
mm2
18-14
18-14
0.8–2.0
0.8–2.0
B
18-14
0.8–2.0
D
18-14
0.8–2.0
C
18-14
0.8–2.0
.772
19.61
.587
14.91
.282
7.16
63482-1
.024
0.61
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.030
0.76
.030
0.76
.025
0.64
.025
0.64
.025
0.64
.025
0.64
Stainless Steel
.370
9.40
.370
9.40
.445
11.30
.445
11.30
.687
17.45
.687
17.45
.687
17.45
.340
8.64
.850
21.59
.687
17.45
.370
9.40
.470
11.94
.470
11.94
.772
19.61
.772
19.61
.772
19.61
.772
19.61
1.245
31.62
1.245
31.62
1.245
31.62
1.170
29.72
1.450
36.83
1.245
31.62
.835
21.21
.930
23.62
.930
23.62
.587
14.91
.587
14.91
.587
14.91
.587
14.91
.980
24.89
.908
23.06
.908
23.06
1.010
25.65
1.030
26.16
.908
23.06
.615
15.62
.705
17.91
.705
17.91
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.495
12.57
.495
12.57
.495
12.57
.660
16.76
.680
17.27
.495
12.57
.250
6.35
.340
8.64
.340
8.64
640052-1*
Tin Plated Brass
8
.018
0.46
.025
0.64
.030
0.76
.030
0.76
.030
0.76
.024
0.61
.025
0.64
.025
0.64
.025
0.64
.025
0.64
10
10
1/4″
5/16″
6
.105–.145 or
2.67–3.68
(2) .110
2.79
10
10
10
0.8–2.0
.445
11.30
10
.105–.145
2.67–3.68
18-14
Tin Plated Steel
.100–.140
2.54–3.56
.090–.145
2.29–3.68
.140–.190
3.56–4.83
.080–.150
2.03–3.81
.090–.140
2.29–3.56
8
A
.025
0.64
Material
and Finish
5
0.8–2.0
C
.282
7.16
.500
12.70
.305
7.75
.460
11.68
.615
15.62
.282
7.16
.282
7.16
.282
7.16
.282
7.16
.282
7.16
Stock
Thk.
.105–.145
2.67–3.68
18-14
Brass
Dimensions
L
E
.734
.586
18.64
14.88
1.245
.908
31.62
23.06
.784
.608
19.91
15.44
1.050
.810
26.68
20.57
1.150
.930
29.21
23.62
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.772
.587
19.61
14.91
Stud Size/
Dia.
10
.090–.145
2.29–3.68
.105–.145
2.67–3.68
.090–.145
2.29–3.68
.100–.180
2.54–4.57
.080–.150
2.03–3.81
.090–.145
2.29–3.68
.085–.140
2.16–3.56
.085–.140
2.16–3.56
.085–.140
2.16–3.56
12
1/4″
1/2″
10
1/2″
5/16″
8
1/4″
5/16″
F
Anti-Rotational
W
.295
7.49
.687
17.45
.342
8.69
.490
12.45
.592
15.04
.370
9.40
.370
9.40
.370
9.40
.370
9.40
.370
9.40
Insul.
Size
8
F
E
Grounding
D
Square Tongue
1/2″
Ring Tongue Terminals
C
“D” Shape
A
With Serrations
Pre-Tin Plated Steel
Tin Plated Brass
Tin Plated Brass
Tin Plated Steel
Stainless Steel
Tin Plated Steel
Tin Plated Steel
Tin Plated Steel
Tin Plated Steel
Tin Plated Steel
Tin Plated Steel
Tin Plated Brass
Stainless Steel
Stainless Steel
Brass
Tin Plated Brass
Stainless Steel
Tin Plated Phos. Brz.
Tin Plated Brass
Tin Plated Brass
Part
Number
60772-3
61777-1
61397-1
61867-2
61359-1
640051-1*
63640-1
61793-1
61794-1
61794-4
350436-2
61795-1
61795-3
63997-1
63602-1*
62786-1*
62700-1
61863-2
62787-1*
62975-1
485029-1
485030-1
* Stainless steel wire connectors cannot be certified under the current CSA standard.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
13
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals
Ring Tongue Terminals, Insulation Support (Continued)
A
With Serrations
Type
B
External Anti-Rotational
Wire Range
AWG
mm2
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
5
.020
0.51
.025
0.64
.025
0.64
.020
0.51
.016
0.41
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.040
1.02
.032
0.81
.020
0.51
.030
0.76
.030
0.76
.025
0.64
.025
0.64
.018
0.46
.030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
Tin Plated Brass
18-14
0.8–2.0
.100–.140
2.54–3.56
B
18-14
0.8–2.0
.085–.140
2.16–3.56
.120–.175
3.05–4.45
.120–.170
3.05–4.32
.140–.190
3.56–4.83
.120–.170
3.05–4.32
18-14
0.8–2.0
H
18-14
0.8–2.0
A
18-14
0.8–2.0
A
16-14
1.4–2.0
.120–.180
3.05–4.57
10
10
10
6–10
8
10
.257
6.53
.257
6.53
.257
6.53
.281
7.14
.323
8.20
3/8″
.390
9.91
C
16-14
1.25–2.0
.120–.180
3.05–4.57
10
.257
6.53
F
16-12
1.25–3.0
G
16-12
1.25–3.0
A
16-12
1.25–3.0
D
14-12
2.0–3.0
.130–.170
3.30–4.32
.130–.170
3.30–4.32
.125 .
(2) 3.18
.150–.210
3.81–5.33
.130–.180
3.30–4.57
.130–.180
3.30–4.57
.130–.180
3.30–4.57
.170–.210
4.32–5.33
.170–.210
4.32–5.33
.130–.180
3.30–4.57
.130–.180
3.30–4.57
8
8
10
10
6
8
10
10
1/4″
1/4″
1/4″
E
Flat Sided
D
“D” Shape
Insul.
Size
E
A
C
Circular Without Serrations
Tin Plated Steel
Brass
Pre-Ni Plated Steel
Pre-Tin Plated Brass
Tin Plated Brass
Pre-Tin Plated Brass
Brass
Tin Plated Brass
Phos. Bronze
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Br. Tin Plated Brass
Br. Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated
Phos. Bronze
W
.240
6.10
.470
11.94
.470
11.94
.342
8.69
.300
7.62
.342
8.69
.296
7.52
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.687
17.45
.687
17.45
.375
9.53
.375
9.53
.470
11.94
.370
9.40
.370
9.40
.342
8.69
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
.425
10.80
Dimensions
L
E
.833
.662
21.16
16.82
.940
.705
23.88
17.91
.940
.705
23.88
17.91
.783
.612
19.89
15.55
.755
.595
19.18
15.11
.784
.608
19.91
15.44
.676
.528
17.17
13.41
1.046
.811
26.57
20.60
1.046
.811
26.57
20.60
1.046
.811
26.57
20.60
1.046
.811
26.57
20.60
1.046
.811
26.57
20.60
1.245
.908
31.62
23.06
1.245
.902
31.62
22.91
.873
.686
22.17
17.42
.873
.686
22.17
17.42
1.046
.811
26.57
20.60
.772
.587
19.61
14.91
.772
.587
19.61
14.91
.784
.608
19.91
15.44
.972
.750
24.69
19.05
.972
.750
24.69
19.05
.972
.750
24.69
19.05
.972
.750
24.69
19.05
.972
.750
24.69
19.05
.972
.750
24.69
19.05
.950
.728
24.13
18.49
.950
.728
24.13
18.49
C
.312
7.93
.340
8.64
.340
8.64
.305
7.75
.280
7.11
.305
7.75
.234
5.94
.384
9.75
.384
9.75
.384
9.75
.384
9.75
.384
9.75
.495
12.57
.495
12.57
.312
7.93
.312
7.93
.384
9.75
.282
7.16
.282
7.16
.305
7.75
.344
8.74
.344
8.74
.344
8.74
.344
8.74
.344
8.74
.344
8.74
.344
8.74
.344
8.74
Part
Number
63518-1
350080-1
63707-1
350199-1
350981-2
640102-1
109451-6
42751-1
42751-2
42751-3
42938-2
42752-2
61336-1
1217330-1
41294
640007-1
640011-1
61624-1
63698-1
640253-2
60485-1
40604-1
40605-1
40960
42639-1
41604
40973
40973-1
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
14
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals, Insulation Support (Continued)
Type
Wire Range
AWG
mm2
C
12-10
3.0–6.0
A
12-10
3.0–6.0
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
.170–.210
4.32–5.33
.150–.210
3.81–5.33
6
.040
1.02
.040
1.02
.024
0.61
.025
0.64
.024
0.61
.025
0.64
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.040
1.02
.040
1.02
.040
1.02
.030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.050
1.27
.050
1.27
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
Tin Plated Brass
1/4″
8
G
12-10
3.0–6.0
.125–.220
3.18–5.59
8
10
10
10
10
A
12-10
3.0–6.0
.150–2.10
3.81–5.33
.150–.210
3.81–5.33
.257
6.53
.257
6.53
.323
8.20
10
8
C
12-10
3.0–6.0
.170–.210
4.32–5.33
10
10
.150–.210
3.81–5.33
A
12-8
3.0–8.0
.150–.220
3.81–5.59
1/4″
.344
8.74
.344
8.74
3/8″
.405
10.29
D
10-8
5.0–8.0
.220–.315
5.59–8.00
.190–.230
4.83–5.84
10
1/4″
10
10
D
10-6
5.0–15.0
.220–.315
5.59–8.00
1/4″
5/16″
10
A
10-6
5.0–15.0
.145–.290
3.68–7.37
1/4″
1/4″
H
Multiple Stud Sizes
G
Anti-Rotational
Insul.
Size
Tin Plated Copper
Stainless Steel
Tin Plated Steel
Tin Plated Copper
Tin Plated Steel
Br. Tin Plated Brass
Tin Plated Brass
Br. Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Br. Tin Plated Brass
Tin Plated Brass
Br. Tin Plated Brass
Tin Plated Copper
Tin Plated Copper
Br. Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Br. Tin Plated Brass
Ring Tongue Terminals
F
Grounding
W
.343
8.71
.535
13.59
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.470
11.94
.343
8.71
.343
8.71
.343
8.71
.470
11.94
.687
17.45
.687
17.45
.687
17.45
.687
17.45
.550
13.97
.550
13.97
.425
10.80
.550
13.97
.550
13.97
.550
13.97
.375
9.53
.490
12.45
.490
12.45
Dimensions
L
E
.921
.750
23.39
19.05
1.045
.780
26.54
19.81
.995
.770
25.27
19.56
.995
.770
25.27
19.56
.995
.770
25.27
19.56
.995
.770
25.27
19.56
1.072
.839
27.23
21.31
1.072
.839
27.23
21.31
1.072
.839
27.23
21.31
1.072
.839
27.23
21.31
1.072
.839
27.23
21.31
1.072
.839
27.23
21.31
.921
.750
23.39
19.05
.921
.750
23.39
19.05
.921
.750
23.39
19.05
1.072
.839
27.23
21.31
1.245
.906
31.62
23.01
1.245
.906
31.62
23.01
1.245
.908
31.62
23.06
1.245
.906
31.62
23.01
1.105
.830
28.07
21.08
1.105
.830
28.07
21.08
.962
.750
24.43
19.05
1.105
.830
28.07
21.08
1.105
.830
28.07
21.08
1.105
.830
28.07
21.08
.992
.810
25.20
20.57
1.110
.870
28.19
22.10
1.110
.870
28.19
22.10
C
.344
8.74
.406
10.31
.340
8.64
.340
8.64
.340
8.64
.340
8.64
.406
10.31
.406
10.31
.406
10.31
.406
10.31
.406
10.31
.406
10.31
.344
8.74
.344
8.74
.344
8.74
.406
10.31
.495
12.57
.495
12.57
.495
12.57
.495
12.57
.350
8.89
.350
8.89
.344
8.74
.350
8.89
.350
8.89
.350
8.89
.400
10.16
.460
11.68
.460
11.68
Part
Number
61424-1
61844-1
62612-1
62612-2
62613-3
62613-2
640009-1
41124
640216-1
41125
41126
42722-1
42863-2
42864-1
42864-2
62691-2
42946-2
640012-1
61289-1
42947-3
41808
41809
640249-1
61352-1
42899-2
42913-2
61866-1
61868-1
61868-2
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
15
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals
Ring Tongue Terminals, Non-Insulation Support
A
With Serrations
Type
Wire Range
AWG
mm2
B
Extruded
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
2
.012
0.30
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.030
0.76
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.030
0.76
Brass
B
24-20
0.6–0.5
A
22-18
0.3–0.9
6
0.3–1.4
.125
3.18
C
22-16
2
.096
2.44
.096
2.44
.096
2.44
4
4
4
A
20-16
0.5–1.4
5
.130
3.30
.131
3.33
6
6
8
8
6
A
20-14
0.5–2.0
6
.096
2.44
.096
2.44
6
6
6
A
18-14
0.8–2.0
8
8
8
10
10
8
16
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Nickel Plated Steel
Tin Plated Brass
Nickel Plated Steel
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Steel
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Pre-Ni Plated Steel
Brass
Tin Plated Brass
Pre-Ni Plated Steel
Brass
Tin Plated Brass
Tin Plated Brass
C
Circular Tongue
W
.200
5.08
.300
7.62
.250
6.35
.175
4.45
.175
4.45
.175
4.45
.234
5.94
.175
4.45
.175
4.45
.260
6.60
.234
5.94
.234
5.94
.260
6.60
.260
6.60
.260
6.60
.260
6.60
.260
6.60
.218
5.54
.250
6.35
.175
4.45
.175
4.45
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.343
8.71
Dimensions
L
E
.350
.245
8.89
6.22
.485
.335
12.32
8.51
.531
.406
13.49
10.31
.360
.270
9.14
6.86
.360
.270
9.14
6.86
.338
.250
8.58
6.35
.331
.234
8.41
5.94
.338
.250
8.58
6.35
.360
.270
9.14
6.86
.400
.270
10.16
6.86
.331
.234
8.41
5.94
.331
.234
8.41
5.94
.400
.270
10.16
6.86
.400
.270
10.16
6.86
.400
.270
10.16
6.86
.400
.270
10.16
6.86
.400
.270
10.16
6.86
.432
.330
10.97
8.38
.395
.285
10.03
7.24
.360
.255
9.14
6.48
.360
.255
9.14
6.48
.535
.380
13.59
9.65
.535
.380
13.59
9.65
.535
.385
13.59
9.78
.535
.380
13.59
9.65
.535
.380
13.59
9.65
.535
.385
13.59
9.78
.535
.380
13.59
9.65
.535
.380
13.59
9.65
.611
.435
15.52
11.05
C
.130
3.30
.230
5.84
.250
6.35
.125
3.18
.125
3.18
.125
3.18
.129
3.28
.125
3.18
.125
3.18
.145
3.63
.129
3.28
.129
3.28
.145
3.63
.145
3.63
.145
3.63
.145
3.63
.145
3.63
.167
4.24
.160
4.07
.125
3.18
.125
3.18
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.275
6.99
Part
Number
61463-1
62686-2
42185-2
40668
40816
42204-1
63457-1
63676-1
40777
40810
34578
40884
63243-1
40811
40811-1
40749
40812
40976
40702
41006
41499
34848
40593
40979
34812
40594
41346
34839
40595
40517
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals, Non-Insulation Support (Continued)
Type
B
Wire Range
AWG
mm2
18-14
Stock
Thk.
Material
and Finish
5
.020
0.51
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.030
0.76
.030
0.76
.030
0.76
.020
0.51
.020
0.51
.030
0.76
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.040
1.02
Tin Plated Brass
4
6
6
8
10
A
18-14
0.8–2.0
10
10
5
10
10
6
B
18-14
0.8–2.0
8
10
8
8
10
10
A
12-10
B
Circular Tongue
Stud Size/
Dia.
0.8–2.0
3.0–6.0
10
10
1/4″
1/4″
5/16″
Ring Tongue Terminals
A
With Serrations
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Stainless Steel
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Copper
Tin Plated Copper
Tin Plated Copper
Tin Plated Brass
Tin Plated Copper
W
.234
5.94
.250
6.35
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.300
7.62
.343
8.71
.343
8.71
.343
8.71
.281
7.14
.281
7.14
.343
8.71
.343
8.71
.343
8.71
.343
8.71
.343
8.71
.343
8.71
.500
12.70
.500
12.70
.500
12.70
.500
12.70
Dimensions
L
E
.331
.234
8.41
5.94
.460
.349
11.68
8.86
.570
.420
14.48
10.67
.570
.420
14.48
10.67
.570
.420
14.48
10.67
.570
.420
14.48
10.67
.570
.420
14.48
10.67
.535
.385
13.59
9.78
.611
.435
15.52
11.05
.611
.435
15.52
11.05
.611
.435
15.52
11.05
.455
.335
11.56
8.51
.455
.335
11.56
8.51
.677
.501
17.20
12.73
.677
.501
17.20
12.73
.677
.501
17.20
12.73
.677
.501
17.20
12.73
.677
.501
17.20
12.73
.670
.500
17.02
12.70
.820
.582
20.83
14.78
.820
.582
20.83
14.78
.820
.582
20.83
14.78
.820
.582
20.83
14.78
C
.129
3.28
.160
4.07
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.230
5.84
.275
6.99
.275
6.99
.275
6.99
.210
5.33
.210
5.33
.281
7.14
.281
7.14
.281
7.14
.281
7.14
.281
7.14
.281
7.14
.338
8.58
.338
8.58
.338
8.58
.338
8.58
Part
Number
60250-2
42054-2
42110-1
42111-1
42111-2
42110-3
42111-3
42716-2
60505-1
40796
40977
61142-2
40951
40696
42425-1
40523
41911
40524
41090
42555-1
41341
41356
42890-1
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
17
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals
Ring Tongue Terminals, Non-Insulation Support (Continued)
Type
Wire Range
AWG
mm2
.030
0.76
.040
1.02
.050
1.27
.050
1.27
.050
1.27
.040
1.02
Tin Plated Brass
6
B
10-8
5.0–8.0
10
10
10
5/16″
A
8 or 10
8.0 or 5.0
D
Without Serrations
Material
and Finish
3.0–6.0
5.0–15.0
C
Square
Stock
Thk.
12-10
10-6
B
Square
Stud Size/
Dia.
C
D
A
“D” Shape
1/4″
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
W
.240
6.10
.385
9.78
.550
13.97
.550
13.97
.550
13.97
.428
10.87
Dimensions
L
E
.659
.500
16.74
12.70
.717
.547
18.21
13.89
1.105
.830
28.07
21.08
1.105
.830
28.07
21.08
1.105
.830
28.07
21.08
.955
.743
24.26
18.87
C
.281
7.14
.340
8.64
.500
12.70
.500
12.70
.500
12.70
.335
8.51
Part
Number
640257-1
42673-2
485015-2
485015-1
61546-1
40797
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
18
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals, Insulation Piercing
Type
Wire Range
AWG
mm2
22-20
0.3–0.6
B
Insul.
Size
.050–.065
1.27–1.65
B
Insulation Piercing
Stock
Thk.
Material
and Finish
2
.013
0.33
.013
0.33
.013
0.33
.020
0.51
.014
0.36
.014
0.36
.014
0.36
.016
0.41
Nickel Plated Brass
5
20-16
0.3–1.4
.105–.120
2.67–3.05
6
5
C
.030–.035
0.76–0.89
Tinsel Wire
5
5
A
18-16
0.8–1.4
.110–.130
2.79–3.30
C
Insulation Penetrating
Stud Size/
Dia.
.096
2.44
10
Pre-Tin Plated Brass
Tin Plated Brass
Brass
Gold Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Ring Tongue Terminals
A
Insulation Piercing
W
.165
4.19
.165
4.19
.186
4.72
.300
7.62
.186
4.72
.186
4.72
.186
4.72
.281
7.13
Dimensions
L
E
.417
.300
10.59
7.62
.417
.330
10.59
8.38
.423
.335
10.74
8.51
.655
.505
16.64
12.83
.440
.350
11.18
8.89
.440
.350
11.18
8.89
.440
.350
11.18
8.89
.800
.660
20.32
16.76
C
.125
3.18
.125
3.18
.125
3.18
.240
6.10
.130
3.30
.130
3.30
.130
3.30
.350
8.89
Part
Number
60422-3
41376
41409
42023
61505-11
61505-21
640189-11
61853-1
1 Insulation penetrating.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
19
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Ring Tongue Terminals
Ring Tongue Terminals, Flag
A
Reversible
Type
A
C
B
Wire Range
AWG
mm2
18-16
18-14
18-12
B
Tab-Lok
C
“F” Crimp
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
0.8–1.4
—
6
Tin Plated Brass
0.8–2.0
.100–.140
2.54–3.56
.176
4.47
.146
3.71
.172
4.37
.203
5.16
.020
0.51
.020
0.51
.018
0.46
.018
0.46
.018
0.46
0.8–3.0
.110–.210
2.79–5.33
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
W
.280
7.11
.380
9.65
.376
9.55
.376
9.55
.376
9.55
Dimensions
L
E
.496
.342
12.60
8.69
—
—
.720
18.29
.720
18.29
.720
18.29
.532
13.51
.532
13.51
.532
13.51
C
.220
5.59
.270
6.86
.263
6.68
.263
6.68
.263
6.68
Part
Number
41443
61443-1
42189-1
42190-1
42191-1
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
20
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Ring Tongue Terminals
B
Oval Hole
C
Non-Insulation Support
D
Heavy Duty Oval Hole
Type
A
A
A
Wire Range
AWG
mm2
29-22
23-19
22-18
0.284–0.643
0.574–0.912
0.643–1.024
E
Anti-Rotational
Insul.
Size
Hole
Dia.
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
.040–.060
1.02–1.52
.100–.140
2.54–3.56
.125–.165
3.18–4.19
.100–.140
2.54–3.56
.125–.165
3.18–4.19
.197
5.00
.171
4.34
.171
4.34
.197
5.00
.265
6.73
10
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.020
0.51
.020
0.51
.028
0.71
.028
0.71
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.020
0.51
Tin Plated Brass
8
8
10
1/4″
6
8
C
22-18
0.643–1.024
—
—
8
1/4″
A
20-16
0.183–1.29
A
18-14
1.024–1.628
.125–.165
3.18–4.19
.100–.140
2.54–3.56
E
18-14
1.024–1.628
.080–.120
2.03–3.05
D
14-12
1.628–2.05
—
A
13-11
1.83–2.3
.085–.150
2.16–3.81
C
13-11
1.83–2.3
—
—
A
B
(2) 17 or
(2) 15
1.15 or
1.45
17-13 1/2 1.51–1.78
.150–.190
3.68–4.83
—
.171
4.34
.171
4.34
.173
4.39
.185
4.70
.180
4.57
.180
4.57
.180
4.57
.197
5.00
.171
4.34
.180
4.57
Ring Tongue Terminals
A
Insulation Support
8
8
8
8
8
8
8
10
8
8
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Lu-Bronze
Lu-Bronze
Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
W
.342
8.69
.342
8.69
.300
7.62
.342
8.69
.420
10.67
.290
7.37
.290
7.37
.290
7.37
.420
10.67
.300
7.62
.342
8.69
.370
9.40
.365
9.27
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.342
8.69
.310
7.87
Dimensions
L
E
.833
.662
21.16
16.81
.833
.662
21.16
16.81
.700
.550
17.73
13.97
.833
.662
21.16
16.81
.872
.662
22.15
16.81
.500
.355
12.70
9.02
.500
.355
12.70
9.02
.500
.355
12.70
9.02
.702
.492
17.83
12.50
.695
.545
17.65
13.84
.833
.662
21.16
16.81
.915
.730
23.24
18.54
.882
.700
22.40
17.78
.833
.657
21.16
16.69
.833
.657
21.16
16.69
.665
.495
16.89
12.57
.665
.495
16.89
12.57
.827
.656
21.01
16.66
.692
.492
17.58
12.50
C
.312
7.92
.312
7.92
.230
5.84
.312
7.92
.312
7.92
.195
4.95
.195
4.95
.195
4.95
.312
7.92
.230
5.84
.312
7.92
.380
9.65
.380
9.65
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.312
7.92
Part
Number
63399-1
60321-2
60323-2
60319-2
63612-1
63649-1
63446-1
63446-2
62835-1
60322-2
60320-1
60320-2
485079-11
485044-11
62755-1
61710-1
350571-1
640212-1
60752-2
63147-1
1High
conductivity copper-tin-zinc alloy.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
21
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Spade Tongue Terminals
Spade Tongue Terminals, Insulation Support
Type
E
A
A
With Serrations
B
Without Serrations
C
With Serrations
D
Round Tongue
E
Wrap Around Ins. Support
Flanged †
Wire Range
AWG
mm2
28-22
26-20
0.08–0.4
0.12–0.6
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
.035–.045
0.89–1.14
.035–.045
0.89–1.14
5
.016
0.41
.016
0.41
.020
0.51
.020
0.51
.014
0.36
.014
0.36
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.025
0.64
.030
0.76
.020
0.51
.018
0.46
.018
0.46
.018
0.46
.018
0.46
Tin Plated Brass
.048–.078
1.22–1.98
D
24-20
0.2–0.6
.048–.078
1.22–1.98
.048–.078
1.22–1.98
.048–.078
1.22–1.98
.048–.078
1.22–1.98
.080–.100
2.03–2.54
.080–.100
2.03–2.54
.075–.100
1.91–2.54
A
20-16
0.5–1.4
.090–.130
2.29–3.30
A
C
B
24-20
20-16
18-14
0.2–0.6
0.5–1.4
0.8–2.0
.100–.140
2.54–3.56
.130–.180
3.30–4.57
.100–.140
2.54–3.56
.130–.180
3.30–4.57
5
6
.185
4.70
6
10
.115
2.92
.115
2.92
8
10
4
6
8
6
8
8
10
6
6
A
18-14
0.8–2.0
.100–.140
2.54–3.56
8
8
10
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
W
.240
6.10
.240
6.10
.250
6.35
.295
7.49
.250
6.35
.300
7.62
.187
4.75
.187
4.75
.290
7.37
.290
7.37
.250
6.35
.275
6.98
.275
6.98
.280
7.11
.280
7.11
.312
7.92
.343
8.71
.275
6.98
.296
7.52
.296
7.52
.296
7.52
.296
7.52
Dimensions
L
E
.545
.435
13.84
11.05
.545
.435
13.84
11.05
.563
.422
14.30
10.72
.585
.443
14.60
11.25
.590
.442
14.99
11.23
.590
.442
14.99
11.23
.517
.392
13.13
9.96
.517
.392
13.13
9.96
.621
.470
15.77
11.94
.621
.470
15.77
11.94
.535
.442
13.59
11.23
.657
.465
16.69
11.81
.657
.465
16.69
11.81
.755
.525
19.18
13.33
.755
.525
19.18
13.33
.645
.520
16.38
13.21
.752
.612
19.10
15.54
.657
.463
16.69
11.76
.750
.540
19.05
13.72
.750
.540
19.05
13.72
.750
.540
19.05
13.72
.750
.540
19.05
13.72
C
.215
5.46
.215
5.46
.215
5.46
.236
5.99
.215
5.46
.215
5.46
.185
4.70
.185
4.70
.220
5.59
.220
5.59
.218
5.54
.175
4.44
.175
4.44
.225
5.71
.225
5.71
.209
5.31
.312
7.92
.175
4.44
.235
5.97
.235
5.97
.235
5.97
.235
5.97
Part
Number
350502-1
350502-2
60124-2
63374-1
60445-2
60501-1
42160-1
42160-2
41589
41590
61238-1
40763
41343
60389-1
60390-1
60251-2
40808
60725-1
60773-2
60774-1
60774-2
60775-1
† Terminals flangable by designated applicator.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
22
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Spade Tongue Terminals, Insulation Support (Continued)
Type
B
Wire Range
AWG
mm2
18-14
B
Heavy Duty
C
Insulation Support
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
.120–.180
3.05–4.57
.205 .291
5.21 7.39
.255 .291
6.48 7.39
.080–.150
2.03–3.81
.145–.290
3.68–7.37
.030
0.76
.030
0.76
.025
0.64
.040
1.02
Tin Plated Copper
0.8–2.0
C
18-14
0.8–2.0
A
10-6
5.0–15.0
10
10
Spade Tongue Terminals
A
Insulation Support
Tin Plated Copper
Tin Plated Brass
Tin Plated Brass
W
.490
12.45
.490
12.45
.375
9.53
.375
9.52
Dimensions
L
E
.800
.613
20.32
15.57
.710
.523
18.03
13.28
.930
.750
23.62
19.05
1.015
.810
25.78
20.57
C
.333
8.46
.333
8.46
.400
10.16
.400
10.16
Part
Number
60998-1
60999-11
61857-2
61855-1
Tongue Bent 45°.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
1
Spring Spade
A
Insulation Support
Type
Wire Range
AWG
mm2
Insul.
Size
Stud Size/
Dia.
6
18-14
0.8–2.0
A
.100–.140
2.54–3.56
6
8
10
16-12
B
1.4–3.0
.110–.150
2.79–3.81
8
20-16
0.5–1.4
—
.138
3.51
18-14
0.8–2.0
—
8
14-10
2.0–5.0
—
10
B
Non-Insulation Support
Stock
Thk.
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.030
0.76
.020
0.51
.020
0.51
.040
1.02
Material
and Finish
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
W
.250
6.35
.343
8.71
.343
8.71
.343
8.71
.343
8.71
.260
6.60
.315
8.00
.372
9.45
Dimensions
L
E
.690
.550
17.53
13.97
.752
.612
19.10
15.54
.752
.612
19.10
15.54
.752
.612
19.10
15.54
.745
.612
18.92
15.54
.472
.350
11.99
8.89
.554
.389
14.07
9.88
.668
.506
16.97
12.85
C
.243
6.17
.312
7.92
.312
7.92
.312
7.92
.312
7.92
.194
4.93
.249
6.33
.281
7.14
Part
Number
63268-1
60187-2
42168-2
42169-2
62795-1
485073-1
350568-1
63610-1
63610-2
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
23
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Spade Tongue Terminals
Spade Tongue Terminals, Non-Insulation Support
A
With Serrations
Type
B
With Serrations
Wire Range
AWG
mm2
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
.020
0.51
.030
0.76
.025
0.64
.025
0.64
.025
0.64
.030
0.76
.030
0.76
.030
0.76
.040
1.02
Tin Plated Brass
D
20-16
0.5–1.4
—
6
B
18-14
0.8–2.0
—
10
A
18-14
0.8–2.0
—
6
—
8
C
18-14
0.8–2.0
—
8
—
8
—
10
—
10
—
10
B
D
12-10
12-10
3.0–6.0
3.0–6.0
C
Without Serrations
Tin Plated Brass
Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
W
.275
6.99
.343
8.71
.275
6.99
.275
6.99
.275
6.99
.312
7.92
.312
7.92
.312
7.92
.440
11.18
D
Flanged
Dimensions
L
E
.527
.328
13.39
8.33
.628
.441
15.95
11.20
.482
.295
12.24
7.49
.482
.295
12.24
7.49
.482
.295
12.24
7.49
.688
.450
17.48
11.43
.688
.450
17.48
11.43
.688
.450
17.48
11.43
.968
.700
24.58
17.78
C
.175
4.45
.275
6.99
.175
4.45
.175
4.45
.175
4.45
.235
5.97
.235
5.97
.235
5.97
.435
11.05
Part
Number
42318-2
40521
40577
40705
41473
42113-2
40891
41495
63526-1
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
Spade Hook Terminals
E
With Serrations
Type
E
Wire Range
AWG
mm2
18-14
0.8–2.0
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
—
10
.020
0.51
Tin Plated Brass
W
.280
7.11
Dimensions
L
E
.540
.374
13.72
9.50
C
.214
5.44
Part
Number
41461
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
24
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Spade Tongue Terminals
Spade Insulation Piercing
Type
Wire Range
AWG
mm2
28-22
0.08–0.4
Insul.
Size
.035–.040
0.89–1.02
Stock
Thk.
Material
and Finish
5
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
Brass
5
5
A
.045–.050
1.14–1.27
26-22
0.12–0.4
5
5
.035–.045
0.89–1.14
.058–.062
1.47–1.58
6
5
6
B
20-16
0.5–1.4
.085–.105
2.16–2.67
8
10
A
20-18
0.5–0.8
.065–.080
1.65–2.03
B
SPADE-LOK
Stud Size/
Dia.
5
5
Spade Tongue Terminals
A
Insulation Piercing
Tin Plated Brass
Pre-Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
W
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.250
6.35
.322
8.18
.322
8.18
.322
8.18
.250
6.35
Dimensions
L
E
.578
.422
14.68
10.72
.578
.422
14.68
10.72
.578
.422
14.68
10.72
.578
.472
14.68
11.99
.578
.422
14.68
10.72
.578
.422
14.68
10.72
.547
.422
13.89
10.72
.500
.392
12.70
9.96
.750
.545
19.05
13.84
.750
.545
19.05
13.84
.750
.545
19.05
13.84
.542
.412
14.77
10.46
C
.215
5.46
.215
5.46
.215
5.46
.265
6.73
.215
5.46
.215
5.46
.215
5.46
.187
4.75
.281
7.14
.281
7.14
.281
7.14
.206
5.23
Part
Number
61498-1
61498-2
61498-3
61519-1
60234-2
640260-2
61385-2
41933
40764
40765
40766
42339-2
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
Flag Spade and
Spring Spade
E
C
W
L
A
Tab-Lok Spring Spade
Type
Wire Range
AWG
mm2
B
Tab-Lok
Insul.
Size
Stud Size/
Dia.
Stock
Thk.
Material
and Finish
12
.018
0.46
.018
0.46
.018
0.46
Brass
A
18-12
0.8–3.0
.110–.210
2.79–5.33
B
18-12
0.8–3.0
.110–.210
2.79–5.33
8
10
Tin Plated Brass
Tin Plated Brass
W
.315
8.00
.376
9.55
.376
9.55
Dimensions
L
E
.720
.535
12.29
13.59
.720
.535
12.29
13.59
.720
.535
12.29
13.59
C
.263
6.68
.263
6.68
.263
6.68
Part
Number
63053-1
42187-11
42188-11
1 Terminals may be bent 45° in applicator (use suffix “N”).
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
25
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Splices
Splices
Product Facts
■
Terminates stranded wire
and/or solid wire
combinations together or to
leads on components or
devices
■
End feed splices available
for pigtail connections.
■
Side feed splices available
for parallel connections.
■
Available in brass, coppernickel, phosphor bronze and
steel material
■
Precision formed, strip-fed
splices terminated in AMP
automatic machines for high
production rates per hour
Tyco Electronics offers a full
selection of AMP open
barrel splices that are
specifically designed to
terminate combinations of
stranded wire and/or solid
wire to themselves or to
resistors, light emitting
devices (LED), glass reed
switch assemblies, etc.
Open barrel splices are
available with or without
serrations. Pre-stripped
stranded or solid wire leads
are forced into the serrations
during the crimping process.
The resulting termination
produces a high tensile
strength connection that is
resistant to corrosion.
Depending on your specific
application, open barrel
splices are available for
terminations in the 400 to
30,000 CMA range in brass,
copper-nickel, phosphor
bronze and steel material.
Others are available with
insulation support barrels to
terminate round or square
posts, resistance wire, and
solid pin or calrod leads.
The insulation support
barrel prevents harmful
flexing of the wire at the
termination point where the
wire is rigidly crimped in the
wire barrel and deters
fraying of the insulation.
Depending on your specific
application, open barrel
insulation support splices
are available for
terminations in the 150 to
12,000 CMA range in brass
and steel material.
Depending on your specific
application, open barrel
insulation piercing splices
are available for terminations
in the 16–22 AWG wire
range in brass material.
Insulation piercing splices
are also available to
eliminate the need to
pre-strip the insulated wire.
The barrel contains two
perpendicular lances that
are driven through the wire
insulation to make contact
with the conductor.
Open barrel splices are
manufactured in strip form
and supplied on reels for
semi-automated and fully
automated terminations on
crimping machines for high
output per hour production
rates.
Identification splices are
available for wire marking.
Up to three digits can be
stamped on the bands
during the crimping
process. Depending on
your specific application,
open barrel identification
splices are available for
terminations from .150 to
.300 insulation diameters in
brass and aluminum
material.
Technical Documents
Application Specifications describe
requirements for using the product in its
intended application and/or crimping
information. They are intended for the
Packaging and Design Engineer and the
Machine Setup Person.
114-2088 — Pigtail and Thru Splices
26
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Splices (Continued)
Side Feed Splices —
Non-Insulation Support
A
Wire Range
CMA
mm2
Type
Crimp
Width
Dim.
L
Material
Part
Number
Brass
Tin Plated Brass
Steel
62759-1
62759-2
62759-5
400-1300
0.20-0.66
.016
0.41
.070
1.78
.100
2.54
500-2200
0.25-1.11
.030
0.76
.110
2.79
.100
2.54
Brass
485016-1
.120
3.05
Brass
Nickel Plated Steel
61769-1
61769-2
.190
4.83
Brass
60372-1
1200-2600
0.61-1.32
.020
0.51
.090
2.29
1500-5000
0.76-2.53
.020
0.51
.110
2.79
.155
3.94
4000-9000
2.03-4.56
.020
0.51
.140
3.56
.250
6.35
7000-12500
3.55-6.33
.031
0.79
.180
4.57
.265
6.73
8500-14000
4.31-7.10
.025
0.64
.180
4.57
.265
6.73
14000-30000
7.10-15.20
.030
0.76
.280
7.11
.310
7.87
A
Brass
Tin Plated Brass
Tin Plated Phos. Bz.
Brass
Tin Plated Brass
Nickel Plated Steel
Tin Plated Steel
Tin Plated Brass
Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Splices
Stock
Thickness
63130-2
63130-3
63130-4
485043-1
485043-2
485043-4
61299-1
61299-2
61299-3
1217967-1
1217967-2
62754-1
62754-2
27
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Splices (Continued)
End Feed Splices —
Non-Insulation Support
A
Wire Range
CMA
mm2
Splices
Type
B
Stock
Thickness
Crimp
Width
Dim.
L
Material
Part
Number
63834-1
400-1100
0.20-0.56
.010
0.25
.055
1.40
.100
2.54
Brass
1000-3200
0.51-1.62
.020
0.51
.110
2.79
.150
3.81
Brass
Tin Plated Brass
1500-4600
0.76-2.33
.020
0.51
.110
2.79
.225
5.72
Nickel Plated Steel
62318-1
Brass
Tin/Cu Plated Brass
Copper-Nickel
Tin Plated Brass
Brass
Tin Plated Brass
Nickel Plated Steel
Blackened St. Steel
Brass
Copper-Nickel
Tin Plated Brass
61492-1
61492-2
61492-3
40868
40509
40552
40952
60470-1
41459
41459-1
41459-2
A
2500-4700
1.27-2.38
.020
0.51
.120
3.05
.150
3.81
3300-9000
1.67-4.56
.020
0.51
.140
3.56
.150
3.81
800-2600
0.41-1.32
.016
0.41
.090
2.29
.065
1.65
1400-3600
0.71-1.82
1400-2800
0.71-1.42
2200-4200
1.11-2.13
2200-2900
1.11-1.47
2200-4500
1.11-2.28
.016
0.41
.016
0.41
.012
0.31
.012
0.31
.012
0.31
.090
2.29
.090
2.29
.090
2.29
.090
2.29
.090
2.29
2500-4700
1.27-2.38
.020
0.51
.120
3.05
.065
1.65
.100
2.54
.250
6.35
.065
1.65
.065
1.65
.150
3.81
3200-3900
1.62-1.98
3200-8000
1.62-4.05
4000-10000
2.02-5.07
6000-8000
3.04-4.05
.012
0.31
.020
0.51
.025
0.64
.020
0.51
7000-13000
41974
41975
Tin Plated Brass
40862
Tin Plated Steel
61008-1
Nickel Plated Steel
63432-1
Tin Plated Steel
60933-2
Nickel Plated Steel
41215
Nickel Plated Steel
41397
.125
3.17
Tin Plated Steel
Brass
60932-2
60932-4
.100
2.54
.140
3.56
.155
3.94
.155
3.94
.150
3.81
.225
5.72
.250
6.35
.125
3.17
Nickel Plated Steel
42329-1
Brass
155352-1
Stainless Steel
41627-1
Tin Plated Steel
485020-1
3.55-6.59
.025
0.64
.180
4.57
.225
5.72
7400-10000
3.75-5.07
.025
0.64
.180
4.57
.250
6.35
12000-18000
6.08-9.12
.025
0.64
.180
4.57
.250
6.35
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
Nickel Plated Steel
Stainless Steel
155353-1
155353-2
41996
62357-1
60997-1
60997-3
60997-5
B
28
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Splices (Continued)
Insulation Support Splices
L
L
A
L
B
C
L
L
E
F
L
L
G
H
Wire Range**
CMA
mm2
Type
Insul.
Dia.
Stock
Dim.
Thickness
L
Material
150-480
0.76-2.43
.035-.050
0.89-1.27
.010
0.25
.305
7.75
Brass
Tin Plated Brass
250-500
0.13-0.25
—
975-2700
0.49-1.37
1200-2200
0.61-1.11
3200-9000
1.62-4.56
C
6000-12000
3.04-6.08
D
1600-4100
0.81-2.08
E
1600-4100
0.81-2.08
F
975-3100
0.49-1.57
.190
4.83
.375
9.52
.230
5.84
.370
9.40
.545
13.85
.450
11.43
.745
18.92
.605
15.37
Brass
.080-.115
2.03-2.92
.070-.100
1.78-2.54
.120-.160
3.05-4.06
.140-.185
3.55-4.70
.105-.145
2.67-3.68
.105-.145
2.67-3.68
.080-.115
2.03-2.92
.010
0.25
.012
0.31
.020
0.51
.020
0.51
.031
0.79
.012
0.31
.012
0.31
.020
0.51
A
B
G
H
a ~ 1000-3100 a ~ 0.51-1.57
b ~ 1500-4500 b ~ 0.76-2.28
1600-3000
0.81-1.52
4100-6900
2.08-3.50
Splices
D
L
.135-.170
3.43-4.32
.020
0.51
.705
17.90
.105-.145
2.67-3.68
.014
0.36
.580
14.70
Part
Number
62382-1
62382-2
1375622-11
Nickel Plated Steel
61021-1
Nickel Plated Steel
62503-2
Nickel Plated Steel
42627-4
Tin Plated Steel
61300-1
Brass
60806-1
Brass
62516-2
Tin Plated Steel
505033-12
Brass
Nickel Plated Steel
Tin Plated Brass
Brass
Brass
62419-2
62419-3
1438246-2
1438246-4
1438246-5
Material
Part
Number
** Wire sizes indicated do not apply to resistance (heater) wire applications.
Crimps to .015 [0.38] round or square post.
2 Crimps to .092 [2.33] dia. solid pin or calrod.
1
Insulation Piercing Crimp
(AWG Wire, 7 Strands Min.)
A
Wire Range
CMA
mm2
Type
A
B
20-16
B
22
0.5-1.4
0.3-0.4
Insul.
Dia.
.070-.090
1.78-2.29
.050-.065
1.27-1.65
Stock
Dim.
Thickness
L
.020
0.51
.012
0.31
.210
5.33
Tin Plated Brass
40771
.210
5.33
Brass
Gold Plated Brass
Nickel Plated Brass
485064-1
485064-2
485064-4
29
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Splices (Continued)
Identification Bands **
A
Type
Wire Range
AWG
mm2
—
—
—
—
A
Splices
B
B
—
—
Insul.
Dia.
.190-.220
4.82-5.59
.210-.235
5.33-5.97
.240-.260
6.09-6.60
.150-.300
3.81-7.62
Stock
Dim.
Thickness
L
.020
0.51
.250
6.35
.020
0.51
.300
7.62
.030
0.76
.180
4.57
Material
Part
Number
Aluminum
Brass
41276
41108
Aluminum
1438254-1
Aluminum
1438254-2
Brass
41282
** One to three digits can be stamped on bands in crimping operation.
30
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices
Product Facts
■
■
■
■
■
■
■
■
Applications
■
■
■
■
■
■
■
Stranded and solid
wire-to-wire connections
Light bulb LED assembly
Switch lead assembly
Resistor lead assembly
Printed circuit board lead
assembly
Flex-film lead assembly
Glass reed switch lead
assembly
RTM Crimpband Splices
■
Made from a continuous coil
of “Ribbon Connector”
material
RTM Crimpband have
grooved serrations for
improved axial retention
Available in brass, tin-plated
brass and copper-nickel
alloy (CA725) material
Make parallel or pigtail
connections on same
machine
Used for electrical and
non-electrical connections
100% of RTM Crimpband
material is used in scrap
free terminations
Crimpband material coupled
with appropriate toolsets
accommodate specific CMA
ranges
Produced in Tyco Electronics
equipment on your
production floor
Meets UL 486C crimp
tensile requirements
Cut
Formed
Crimped
Mod I
Tyco Electronics features
the AMP RTM Crimpband
system that is comprised
of two key features: the
semi-automatic termination
machine and a reel of
RTM Crimpband material.
In a one-step crimping
operation, the machine
feeds, cuts, forms and
crimps the material to
provide a low-cost, high
reliability crimp connection.
The RTM Crimpband
splices are formed during
the crimping process from
Mod III
milled longitudinal groove
material that produce rolled,
rounded serrations.
They are designed to
terminate pre-stripped
stranded and solid wire
conductors together as well
as wire conductors to switch
tabs, resistors, printed
circuit board, flex circuit and
light bulb LED and glass
reed switch assemblies, etc.
The flexibility of the RTM
Crimpband system provides
opportunity for use in
custom applications for
either electrical and / or
mechanical connections.
Tyco Electronics provides a
wide range of toolset types
and crimpband splices to
meet various production
requirements.
Depending on your specific
application, RTM Crimpband
splices are available in 3, 6,
7, 8, 9, 10 14 and 20 ridge
serration versions for
terminations in the 170 to
13,000 CMA range.
31
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
Notes: So that the proper Crimpband splice is chosen, Tyco Electronics
recommends the following:
1. Submit 10 samples of wire combinations and/or components to be
crimped with any special requirements to your Tyco Electronics
sales representative.
2. Pull-out force and/or millivolt drop tests will be performed to
develop recommendations for proper Crimpband material, toolset
and crimp heights.
3. Tooling and testing will be documented on a Material & Tooling
Sheet (M & T sheet).
4. Crimpband material quotes, tooling quotes and samples will be
submitted to the customer.
RTM Crimpband
Interconnection System
How the System Operates
➀ Feed (Ribbon
Connector Material)
Machine feeds strip until
the strip hits the wire stop.
➁ Shear (Blank Length)
The strip is cut by the
cutter block former bar
insert tooling.
W
➂ Bend (Crimp Formed)
RTM Crimpband Splices
The former bar drives the
cut strip over the anvil,
bending the cut strip into
an upside down “U”.
➀
Ridges
T
Section A-A
A
➃ Wire (Placement)
Pigtail and Parallel (Thru)
splice terminations are
made on the same
machine.
➁
A
➄ Crimp (Crimp Formed)
➂
The anvil retracts as the
driver takes the formed
strip down into the
clincher.
W
B.L. Dim.
Tooling
Size
092
L
Splice No.
Example:
L
See Figure 1 and/or Legend below
W Dim.
T Dim.
Connector
Material
Material
Width
Thickness
F
20
TCRS
092
➃
Lead Wires
Connector Specification Code
Machine
Basis
Blank
Length
F
20
➄
TCRS
Legend
Machine Basis
L
P
Leased
Purchase
Tooling
Size Code
032
032/036
036
045
051
061
061/076
076
076/092
092
092/125
125
125/160
125/165
165
Blank Length
B/L (Nom.)
.167
.228
.224
.246
.267
.292
.324
.339
.361
.379
.413
.446
.485
.506
.546
Connector
Width
Code
B
C
D
E
F
G
H
L
M
N
P
Note: For B/L above, .546 consult
factory for tooling size code
W
Dim.
.076
.138
.154
.185
.216
.234
.247
.086
.330
.500
.114
N
No. of
Ridges
3
6
7
8
9
10
10
3
14
20
5
Material
Thickness
Code
12
16
18
20
22
24
25
Material
Code
B
A
TB
TCRS
SS
ST
T±.002
Dim.
.012
.016
.018
.020
.022
.024
.025
Material/Finish
UL486C Pull Out
Wire Size Force Requirements
AWG
Underwriters
Laboratory (lbs.)
26
3
24
5
22
8
20
10
18
10
16
15
14
25
12
35
10
40
CDA 260 Brass
CDA 725 Copper/
Nickel Alloy
Pre-Tin over
CDA 260 Brass
1010 Cold Rolled
Steel, Tin Plated
301 or 302
Stainless Steel
Stainless Steel,
Tin Plated
32
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
20 Ridges
T
W
AWG/
Wire Range
CMA
Stock
Mat’l
mm2
Solid Dia.
Range
Thk. (T) Width (W) Material
.084-.114 7000-13000 .020
.500
Tin Plated
111⁄2-9
4.00-6.50
2.13-2.90
0.51
12.70
Brass
Toolset
200/202
Part
Number
Descriptive
X-ref
1601771-1 L200/202N20TB
RTM Crimpband Splices
14 Ridges
T
W
AWG/
Wire Range
CMA
mm2
Solid Dia.
Range
22-19
.024-.036
600-1300
0.38-0.60
0.61-0.91
22-19
.024-.036
600-1300
0.38-0.60
0.61-0.91
†
Stock
Mat’l
Thk. (T) Width (W)
.012
.330
0.30
8.38
.012
.330
0.30
8.38
Material
Toolset
Part
Number
Descriptive
X-ref
Cu Ni
045
1601577-1†
L045M12A
Brass
045
1601578-1
L045M12B
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
10 Ridges
T
W
AWG/
Wire Range
mm2
Solid Dia.
22-19
.024-.036
0.38-0.60
0.61-0.91
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
†
CMA
Range
Stock
Mat’l
Thk. (T) Width (W)
.012
.234
600-1300
0.30
5.94
.016
.234
800-1500
0.41
5.94
.012
.234
900-2600
0.30
5.94
.020
.234
900-2600
0.51
5.94
.020
.234
7000-13000 0.51
5.94
.234
7000-13000 .025
0.64
5.94
Material
Toolset
Part
Number
Descriptive
X-ref
Brass
045
1601575-1
L045G12B
Cu Ni
051
1601593-1†
L051G16A
Brass
061
1601632-1†
L061G12B
Brass
061
1601633-1
L061G20B
Brass
200/202
1601853-1
Brass
200/202
1601769-1
P200/
202G20B
L200/
202G25BX
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
33
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
9 Ridges
T
W
RTM Crimpband Splices
AWG/
Wire Range
CMA
mm2
Solid Dia.
Range
22-19
.024-.036
600-1300
0.38-0.60
0.61-0.91
.030-.051
201⁄2-16
900-2600
0.45-1.30
0.76-1.29
Stock
Mat’l
Thk. (T) Width (W)
.012
.216
0.30
5.49
.012
.216
0.30
5.49
Material
Toolset
Part
Number
Descriptive
X-ref
Stainless
Steel
Stainless
Steel
045
1601807-1
P045F12SS
061
1601520-1
G061F12SS
Toolset
Part
Number
032/036
1601553-1
Descriptive
X-ref
L032/
036E12A
8 Ridges
T
W
AWG/
Wire Range
CMA
Stock
Mat’l
mm2
Solid Dia.
Range
Thk. (T) Width (W) Material
24-20
.020-.033
.012
.185
400-1100
Cu Ni
0.20-0.50
0.51-0.84
0.30
4.70
18-14
.040-.063 1600-4000
.018
.185
Tin Plated
0.80-2.00
1.02-1.60
0.46
4.70
CRS
.084-.114 7000-13000 .024
.185
111⁄2-9
Brass
4.00-6.50
2.13-2.90
0.61
4.70
076
1601669-1 L076E18TCRS
200/202
1601768-1
L200/
202E24B
Toolset
Part
Number
032/036
1601550-1
032/036
1601551-1
032/036
1601797-1
032/036
1601798-1
Descriptive
X-ref
L032/
036D12B
L032/
036D16A
P032/
036D16B
P032/
036D16TB
045
1601572-1
L045D12B
045
1601573-1
L045D16A
7 Ridges
T
W
AWG/
Wire Range
mm2
Solid Dia.
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
22-19
.024-.036
0.38-0.60
0.61-0.91
22-19
.024-.036
0.38-0.60
0.61-0.91
CMA
Range
400-1100
400-1100
400-1100
400-1100
600-1300
600-1300
Stock
Mat’l
Material
Thk. (T) Width (W)
.012
.154
Brass
0.30
3.91
.016
.154
Cu Ni
0.41
3.91
.016
.154
Brass
0.41
3.91
.016
.154
Tin Plated
0.41
3.91
Brass
.012
.154
Brass
0.30
3.91
.016
.154
Cu Ni
0.41
3.91
34
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
7 Ridges (Continued)
T
W
†
CMA
Range
600-1300
800-1500
800-1500
800-1500
800-1500
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
1100-3200
1200-3700
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
Stock
Mat’l
Part
Toolset
Thk. (T) Width (W) Material
Number
.016
.154
Brass
045
1601507-1†
0.41
3.91
.012
.154
Brass
051
1601587-1
0.30
3.91
.016
.154
Brass
051
1601588-1
0.41
3.91
.020
.154
Nickel Plated
051
1601591-1
0.51
3.91
Steel
.020
.154
Tin Plated
051
1601811-1†
0.51
3.91
CRS
.012
.154
Cu Ni
061
1601818-1†
0.30
3.91
.012
.154
Brass
061
1601620-1†
0.30
3.91
.012
.154
Tin Plated
061
1601514-1†
0.30
3.91
Brass
.016
.154
Cu Ni
061
1601819-1
0.41
3.91
.016
.154
Brass
061
1601820-1
0.41
3.91
.016
.154
Tin Plated
061
1601623-1
0.41
3.91
Brass
.018
.154
Brass
061
1601625-1
0.46
3.91
.018
.154
Tin Plated
061
1601628-1
0.46
3.91
Brass
.020
.154
Cu Ni
061
1601629-1
0.51
3.91
.020
.154
Brass
061
1601630-1
0.51
3.91
.020
.154
Tin Plated
061
1601631-1
0.51
3.91
Brass
.016
.154
Brass
061/076 1601601-1
0.41
3.91
.016
.154
Brass
061/092 1601603-1
0.41
3.91
.012
.154
Cu Ni
076
1601828-1
0.30
3.91
.012
.154
Brass
076
1601655-1†
0.30
3.91
.016
.154
Cu Ni
076
1601656-1
0.41
3.91
.016
.154
Brass
076
1601829-1
0.41
3.91
.016
.154
Tin Plated
076
1601658-1
0.41
3.91
Brass
.018
.154
Cu Ni
076
1601660-1
0.46
3.91
.018
.154
Brass
076
1601661-1
0.46
3.91
.018
.154
Tin Plated
076
1601664-1
0.46
3.91
Brass
.020
.154
Brass
076
1601665-1
0.51
3.91
.020
.154
Tin Plated
076
1601667-1
0.51
3.91
CRS
.024
.154
Brass
076
1601668-1
0.61
3.91
Descriptive
X-ref
G045D16B
L051D12B
L051D16B
RTM Crimpband Splices
AWG/
Wire Range
mm2
Solid Dia.
22-19
.024-.036
0.38-0.60
0.61-0.91
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
20-15
.033-.057
0.60-1.60
0.84-1.45
.035-.061
191⁄2-141⁄2
0.60-1.80
0.89-1.54
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
L051D20NPS
P051D20TCRS
P061D12A
L061D12B
G061D12TB
P061D16A
P061D16B
L061D16TB
L061D18B
L061D18TB
L061D20A
L061D20B
L061D20TBX
L061/076D16B
L061/092D16B
P076D12A
L076D12B
L076D16A
P076D16B
L076D16TB
L076D18AX
L076D18B
L076D18TB
L076D20B
L076D20TCRS
L076D24B
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
35
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
7 Ridges (Continued)
T
W
RTM Crimpband Splices
AWG/
Wire Range
mm2
Solid Dia.
171⁄2-13
.042-.068
0.95-2.54
1.07-1.80
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
16-12
.051-.078
1.30-3.46
1.29-1.98
16-12
.051-.078
1.30-3.46
1.29-1.98
16-12
.051-.078
1.30-3.46
1.29-1.98
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
14-11
.063-.092
2.00-4.20
1.60-2.34
14-11
.063-.092
2.00-4.20
1.60-2.34
.071-.097
131⁄2-101⁄2
2.54-4.50
1.70-2.46
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
†
CMA
Range
1800-4600
2200-5200
2200-5200
2200-5200
2200-5200
2200-5200
2200-5200
2200-5200
2600-6100
2600-6100
2600-6100
3000-6750
3000-6750
3000-6750
3000-6750
3000-6750
3000-6750
3000-6750
3500-7500
3500-7500
3500-7500
3500-7500
4000-8500
4000-8500
4500-9500
7000-13000
7000-13000
7000-13000
7000-13000
Stock
Mat’l
Thk. (T) Width (W)
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.018
.154
0.46
3.91
.018
.154
0.46
3.91
.018
.154
0.46
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.016
.154
0.41
3.91
.018
.154
0.46
3.91
.018
.154
0.46
3.91
.018
.154
0.46
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.018
.154
0.46
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.016
.154
0.41
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
.020
.154
0.51
3.91
Material
Toolset
Part
Number
Brass
076/092
1601642-1
Descriptive
X-ref
L076/
092D16BX
Cu Ni
092
1601689-1
L092D16ASP
Brass
092
1601691-1
L092D16B
Tin Plated
Brass
092
1601693-1
L092D16TB
Cu Ni
092
1601694-1
L092D18A
Brass
092
1601695-1
L092D18B
Tin Plated
Brass
092
1601841-1
P092D18TB
Brass
092
1601528-1†
G092D20B
Cu Ni
092/125
1601680-1
Brass
092/125
1601681-1
Tin Plated
CRS
092/125
1601682-1
L092/
125D20A
L092/
125D20B
092/
125D20TCRS
Brass
125
1601529-1
G125D16B
Cu Ni
125
1601531-1
G125D18A
Brass
125
1601726-1
L125D18B
Tin Plated
Brass
125
1601729-1
L125D18TBX
Brass
125
1601730-1
L125D20B
Tin Plated
Brass
Tin Plated
CRS
Tin Plated
Brass
125
1601731-1
L125D20TB
125
1601733-1 L125D20TCRS
125/165
1601709-1
Cu Ni
125/165
1601710-1
L125/
165D18TB
L125/
165D20A
L125/
165D20B
L125/
165D20TB
Brass
125/165
1601711-1
Tin Plated
Brass
125/165
1601712-1
Cu Ni
165
1601754-1†
L165D20A
Brass
165
1601755-1
L165D20B
Brass
165/200
1601532-1
Brass
200/202
1601764-1
Cu Ni
200/202
1601765-1
Brass
200/202
1601852-1
Tin Plated
Brass
200/202
1601766-1
G165/
200D20B
L200/
202D16B
L200/
202D20A
P200/
202D20B
L200/
202D20TB
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
36
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
6 Ridges
T
W
†
CMA
Range
400-1100
400-1100
600-1300
600-1300
600-1300
800-1500
800-1500
800-1500
800-1500
900-2600
900-2600
900-2600
900-2600
900-2600
900-2600
1100-3200
1100-3200
1100-3200
1600-4000
1600-4000
1600-4000
1600-4000
1600-4000
1800-4600
2200-5200
2200-5200
3000-6750
3000-6750
3000-6750
Stock
Mat’l
Thk. (T) Width (W)
.012
.138
0.30
3.51
.016
.138
0.41
3.51
.012
.138
0.30
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.012
.138
0.30
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.018
.138
0.46
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.018
.138
0.46
3.51
.018
.138
0.46
3.51
.020
.138
0.51
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.018
.138
0.46
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.018
.138
0.46
3.51
.018
.138
0.46
3.51
.018
.138
0.46
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.016
.138
0.41
3.51
.018
.138
0.46
3.51
.018
.138
0.46
3.51
Material
Toolset
Part
Number
Tin Plated
Brass
032/036
1601548-1
Brass
032/036
1601549-1
Descriptive
X-ref
L032/
036C12TB
L032/
036C16B
Brass
045
1601566-1
L045C12B
Cu Ni
045
1601569-1
L045C16A
Brass
045
1601571-1
L045C16B
Brass
051
1601808-1†
P051C12B
Cu Ni
051
1601809-1
P051C16A
Brass
051
1601810-1
P051C16B
Brass
051
1601586-1†
L051C18B
Cu Ni
061
1601614-1
L061C16A
Brass
061
1601511-1
G061C16B
Tin Plated
Brass
061
1601617-1
L061C16TB
Cu Ni
061
1601618-1
L061C18AX
Brass
061
1601619-1
L061C18B
Brass
061
1601513-1†
G061C20B
Brass
061/076
1601597-1
Tin Plated
Brass
061/076
1601599-1
Brass
061/076
1601600-1†
L061/
076C16B
L061/
076C16TB
L061/
076C18B
Cu Ni
076
1601650-1
L076C16A
Brass
076
1601651-1
L076C16B
Cu Ni
076
1601652-1†
L076C18A
P076C18B
Brass
076
1601827-1
Tin Plated
CRS
076
1601654-1† L076C18TCRS
Brass
076/092
1601640-1
L076/
092C16B
Cu Ni
092
1601837-1
P092C16AX
Brass
092
1601687-1
L092C16B
Tin Plated
Brass
125
1601721-1
L125C16TB
Cu Ni
125
1601722-1
L125C18A
Brass
125
1601723-1
L125C18B
RTM Crimpband Splices
AWG/
Wire Range
mm2
Solid Dia.
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
22-19
.024-.036
0.38-0.60
0.61-0.91
22-19
.024-.036
0.38-0.60
0.61-0.91
22-19
.024-.036
0.38-0.60
0.61-0.91
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
20-15
.033-.057
0.60-1.60
0.84-1.45
20-15
.033-.057
0.60-1.60
0.84-1.45
20-15
.033-.057
0.60-1.60
0.84-1.45
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
.042-.068
171⁄2-13
0.95-2.54
1.07-1.80
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
37
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
RTM Crimpband Splices (Continued)
3 Ridges
T
W
RTM Crimpband Splices
AWG/
Wire Range
mm2
Solid Dia.
.013-.028
271⁄2-21
0.09-0.40
0.33-0.71
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
22-19
.024-.036
0.38-0.60
0.61-0.91
22-19
.024-.036
0.38-0.60
0.61-0.91
22-19
.024-.036
0.38-0.60
0.61-0.91
22-19
.024-.036
0.38-0.60
0.61-0.91
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.028-.039
21-181⁄2
0.40-0.75
0.71-0.99
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
20-15
.033-.057
0.60-1.60
0.84-1.45
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
†
CMA
Range
Stock
Mat’l
Thk. (T) Width (W)
.012
.076
170-800
0.30
1.93
.012
.076
400-1100
0.30
1.93
.012
.076
400-1100
0.30
1.93
.016
.076
400-1100
0.41
1.93
.016
.076
400-1100
0.41
1.93
.018
.076
400-1100
0.46
1.93
.016
.076
600-1300
0.41
1.93
.016
.076
600-1300
0.41
1.93
.016
.076
600-1300
0.41
1.93
.016
.076
600-1300
0.41
1.93
.016
.076
800-1500
0.41
1.93
.016
.076
800-1500
0.41
1.93
.016
.076
800-1500
0.41
1.93
.020
.076
800-1500
0.51
1.93
.016
.076
900-2600
0.41
1.93
.016
.076
900-2600
0.41
1.93
.016
.076
900-2600
0.41
1.93
.016
.076
900-2600
0.41
1.93
.016
.076
1100-3200
0.41
1.93
.016
.076
1600-4000
0.41
1.93
.020
.076
1600-4000
0.51
1.93
Material
Toolset
Part
Number
Descriptive
X-ref
Brass
032
1601555-1
L032B12B
Cu Ni
032/036
1601542-1
Brass
032/036
1601795-1
Brass
032/036
1601545-1
Tin Plated
Brass
032/036
1601546-1
Brass
032/036
1601547-1†
L032/
036B12A
P032/
036B12B
L032/
036B16B
L032/
036B16TB
L032/
036B18B
Cu Ni
045
1601503-1
G045B16A
Brass
045
1601562-1
L045B16B
Tin Plated
Brass
Tin Plated
Brass
045
1601504-1†
G045B16TB
045
1601564-1 L045B16TBSP
Cu Ni
051
1601580-1†
L051B16A
Brass
051
1601582-1†
L051B16B
Tin Plated
Brass
045
1601583-1†
L051B16TB
Brass
051
1601584-1
L051B20B
Tin Plated
Brass
061
1601612-1†
L061B16TB
Cu Ni
061
1601610-1
L061B16A
Brass
061
1601611-1
L061B16B
Brass
061
1601635-1
L061L16B
Tin Plated
Brass
061/076
1601596-1
L061/
076B16TBX
Brass
076
1601825-1
P076B16B
Brass
076
1601649-1
L076B20B
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
38
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
MTM Crimpband Splices
Product Facts
■
Made from a continuous coil
of “Ribbon Connector”
material
■
Magnet wires MTM
Crimpband splices have
machine-piercing serrations
designed for displacing
magnet wire insulation
■
Available in brass, tinplated brass, and coppernickel alloy material
■
Make parallel or pigtail
connections on same
machine
■
100% of Crimpband
material is used in scrap
free terminations
■
■
Formed
Crimpband material coupled
with appropriate toolsets
accommodate specific
CMA ranges
Produced in Tyco Electronics
equipment on your
production floor
Meets UL 486C crimp
tensile requirements
Applications
■
Motors windings and
connections
■
Coil connections
■
Transformer windings and
connections
■
Lighting ballasts
■
Power supplies
MTM Crimpband Splices
■
Cut
Crimped
Mod I
Tyco Electronics features
the AMP MTM Crimpband
system that is comprised of
two key features: the semiautomatic termination
machine and a reel of MTM
Crimpband material.
In a one-step crimping
operation, the machine
feeds, cuts, forms and
crimps the material to
provide a low-cost, high
reliability crimp connection.
The MTM Crimpband
splices are formed during
the crimping process from
Mod III
machined longitudinal
grooved material that pierces
magnet wire varnish film
insulation during crimping.
MTM Crimpband splices
are specifically designed to
terminate magnet wire to
itself or in combination with
standard solid or stranded
lead wire.
Three magnet wires
maximum can be
terminated together with
stranded lead wire in one
splice.
Tyco Electronics provides a
wide range of toolset types
and Crimpband splices to
meet various production
requirements.
Depending on your
specific application, MTM
Crimpband splices are
available in 7, 9, 11 and 13
serration versions for
terminations in the 400 to
13,000 CMA range.
When aluminum magnet wire
is used, MTM Crimpband
splices must be tin plated.
39
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
MTM Crimpband Splices (Continued)
MTM Crimpband
Interconnection System
Notes: So that the proper Crimpband splice is chosen, Tyco Electronics
recommends the following:
1. Submit 10 samples of wire combinations and/or components to be
crimped with any special requirements to your Tyco Electronics
sales representative.
2. Pull-out force and/or millivolt drop tests will be performed to
develop recommendations for proper Crimpband material, toolset
and crimp heights.
3. Tooling and testing will be documented on a Material & Tooling
Sheet (M & T sheet).
4. Crimpband material quotes, tooling quotes and samples will be
submitted to the customer.
How the System Operates
➀ Feed (Magnet Wire
Connector Material)
Machine feeds strip until
the strip hits the wire stop.
➁ Shear (Blank Length)
The strip is cut by the
cutter block former bar
insert tooling.
➂ Bend (Crimp Formed)
W
The former bar drives the
cut strip over the anvil,
bending the cut strip into
an upside down “U”.
➀
MTM Crimpband Splices
In Pigtail and Parallel
(Thru) splices magnet
wires must be placed on
top of the lead wire.
➂
The anvil retracts as the
driver takes the formed
strip down into the
clincher.
➃
Connector Specification Code
Splice No.
Example:
L
See Figure 1 and/or Legend below
W Dim.
T Dim.
Connector
Material
Finish
Width
Thickness
6R
20
T
092
Blank
Length
W
Magnet Wires
on top
L
D
➁
A
➄ Crimp (Crimp Formed)
B.L. Dim.
Tooling
Size
092
Serrations
Section A-A
➃ Wire (Placement)
Machine
Basis
Burrs
T
A
6R
20
T
Material
Code
➄
Lead Wire
B
B
Legend
L
Leased
Machine Basis
P
G*
Purchase
General
* Customer has their own Tooling
Tooling
Size Code
032
032/036
036
045
051
061
061/076
076
076/092
092
092/125
125
125/160
125/165
165
Blank Length
B/L (Nom.)
.167
.228
.224
.246
.267
.292
.324
.339
.361
.379
.413
.446
.485
.506
.546
Note: For B/L above, .546 consult
Tyco Electronics for tooling size
code.
Connector Width Code
4R
5 Serrations
6R
7 Serrations
8R
9 Serrations
10R
11 Serrations
Material
Thickness
Code
12
14
16
20
25
Material
Code
B
A
TB
T±.002
Dim.
.012
.014
.016
.020
.025
W
.138
.154
.194
.234
D
Serration
Depth
.005
.005
.007
.007
.007
UL486C Pull Out
Wire Size Force Requirements
AWG
Underwriters
Laboratory (lbs.)
26
3
24
5
22
8
20
10
18
10
16
15
14
25
12
35
10
40
Material/Finish
CDA 260 Brass
CDA 725 Copper/
Nickel Alloy
Pre-Tin over
CDA 260 Brass
40
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
MTM Crimpband Splices (Continued)
11 Serrations
T
W
AWG/
Wire Range
mm2
Solid Dia.
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
.071-.097
131⁄2-101⁄2
2.54-4.50
1.70-2.46
.071-.097
131⁄2-101⁄2
2.54-4.50
1.70-2.46
CMA
Range
3500-7500
3500-7500
4500-9500
4500-9500
Stock
Mat’l
Material
Thk. (T) Width (W)
.025
.234
Brass
0.64
5.94
.025
.234
Tin Plated
0.64
5.94
Brass
.025
.234
Brass
0.64
5.94
.025
.234
Tin Plated
0.64
5.94
Brass
Toolset
Part
Number
Descriptive
X-ref
P125/
16510R25B
L125/
16510R25TB
P165/
20010R25B
P165/
20010R25TB
125/165
1601842-1
125/165
1601705-1
165/200
1601847-1
165/200
1601848-1
Material
Toolset
Part
Number
Tin Plated
Brass
Tin Plated
Brass
032/036
1601794-1†
Descriptive
X-ref
P032/
0368R16TB
061
1601607-1†
L0618R16TB
9 Serrations
T
MTM Crimpband Splices
W
AWG/
Wire Range
mm2
Solid Dia.
24-20
.020-.033
0.20-0.50
0.51-0.84
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
16-12
.051-.078
1.30-3.46
1.29-1.98
16-12
.051-.078
1.30-3.46
1.29-1.98
16-12
.051-.078
1.30-3.46
1.29-1.98
16-12
.051-.078
1.30-3.46
1.29-1.98
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
.059-.087
141⁄2-111⁄2
1.80-4.00
1.50-2.21
14-11
.063-.092
2.00-4.20
1.60-2.34
.084-.114
111⁄2-9
4.00-6.50
2.13-2.90
†
CMA
Range
400-1100
900-2600
900-2600
900-2600
1600-4000
1600-4000
1800-4600
1800-4600
2600-6100
2600-6100
2600-6100
2600-6100
3000-6750
3000-6750
3000-6750
3000-6750
3500-7500
3500-7500
4000-8500
7000-13000
Stock
Mat’l
Thk. (T) Width (W)
.016
.194
0.41
4.93
.018
.194
0.46
4.93
.018
.194
0.46
4.93
.018
.194
0.46
4.93
.016
.194
0.41
4.93
.020
.194
0.51
4.93
.020
.194
0.51
4.93
.020
.194
0.51
4.93
.020
.194
0.51
4.93
.020
.194
0.51
4.93
.025
.194
0.64
4.93
.025
.194
0.64
4.93
.016
.194
0.41
4.93
.016
.194
0.41
4.93
.020
.194
0.51
4.93
.025
.194
0.64
4.93
.025
.194
0.64
4.93
.025
.194
0.64
4.93
.025
.194
0.64
4.93
.025
.194
0.64
4.93
Brass
061
1601608-1
L0618R20B
Tin Plated
Brass
Tin Plated
Brass
Tin Plated
Brass
061
1601814-1†
P0618R20TB
076
1601824-1
P0768R16TB
076
1601857-1
PO768R20TB
Brass
076/092
1601823-1
Tin Plated
Brass
076/092
1601639-1
Brass
092/125
1601833-1
Tin Plated
Brass
092/125
1601677-1
Brass
092/125
1601678-1†
Tin Plated
Brass
092/125
1601835-1†
P076/
0928R20B
L076/
0928R20TB
P092/
1258R20B
L092/
1258R20TB
L092/
1258R25B
P092/
1258R25TB
Brass
125
1601717-1†
L1258R16B
Tin Plated
Brass
125
1601718-1
L1258R16TB
Brass
125
1601846-1
P1258R20B
Brass
125
1601719-1
L1258R25B
Brass
125/165
1601706-1
Tin Plated
Brass
Tin Plated
Brass
Tin Plated
Brass
125/165
1601707-1
L125/
1658R25B
L125/
1658R25TB
165
1601750-1†
L1658R25TB
200/202
1601761-1
L200/
2028R25TB
These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
41
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
MTM Crimpband Splices (Continued)
7 Serrations
T
W
MTM Crimpband Splices
AWG/
Wire Range
mm2
Solid Dia.
.013-.028
271⁄2-21
0.09-0.40
0.33-0.71
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
24-20
.020-.033
0.20-0.50
0.51-0.84
22-19
.024-.036
0.38-0.60
0.70-0.91
22-19
.024-.036
0.38-0.60
0.70-0.91
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
.030-.051
201⁄2-16
0.45-1.30
0.76-1.29
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
18-14
.040-.063
0.80-2.00
1.02-1.60
.042-.068
171⁄2-131⁄2
0.95-2.54
1.07-1.80
.047-.072
161⁄2-13
1.10-2.60
1.19-1.83
16-12
.051-.078
1.30-3.46
1.29-1.98
16-12
.051-.078
1.30-3.46
1.29-1.98
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
.055-.082
151⁄2-12
1.54-3.46
1.40-2.10
CMA
Range
170-800
400-1100
400-1100
400-1100
400-1100
600-1300
600-1300
900-2600
900-2600
1600-4000
1600-4000
1600-4000
1800-4600
2200-5200
2600-6100
2600-6100
3000-6750
3000-6750
3000-6750
Stock
Mat’l
Thk. (T) Width (W)
.012
.154
0.30
3.91
.012
.154
0.30
3.91
.012
.154
0.30
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.020
.154
0.51
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.020
.154
0.51
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
.020
.154
0.51
3.91
.012
.154
0.30
3.91
.016
.154
0.41
3.91
.016
.154
0.41
3.91
Part
Number
Descriptive
X-ref
Material
Toolset
Brass
032
Brass
032/036
1601539-1
Cu Ni
032/036
1601538-1
Brass
032/036
1601540-1
Tin Plated
Brass
032/036
1601793-1
L032/
0366R12B
L032/
0366R12AUF1
L032/
0366R16B
P032/
0366R16TB
Brass
045
1601559-1
L0456R16B
Brass
045
1601560-1†
L0456R20B
Brass
061
1601604-1
L0616R16B
Tin Plated
Brass
061
1601606-1
L0616R16TB
1601800-1 P0326R12BUF1
Brass
076
1601644-1
L0766R16B
Tin Plated
Brass
076
1601646-1†
L0766R16TB
Brass
076
1601647-1†
L0766R20B
Brass
076/092
1601637-1
L076/
0926R16BX
Tin Plated
Brass
Tin Plated
Brass
092
1601683-1
L0926R16TB
092/125
1601675-1
Brass
092/125
1601832-1
L092/
1256R16TB
P092/
1256R20B
Brass
125
1601844-1
P1256R12B
Brass
125
1601845-1
P1256R16B
Tin Plated
Brass
125
1601716-1†
L1256R16TB
UF designates Ultra-Fine serrations which are recommended for applications using wire size 28 AWG [0.32 mm]
or smaller.
† These part numbers are available upon special request; contact Tyco Electronics Engineering for details.
1
42
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices
Product Facts
Compression crimp
eliminates cold solder
points, weld burns and
wire embrittlement usually
associated with thermaltype terminations
■
Excellent tensile strength—
vibration resistant
■
Provides a superior
electrical connection that is
free of many contaminants
such as stripper residue and
solder flux
■
Precision formed, strip-fed
splices terminated in AMP
automatic machines for high
production rates per hour
■
High termination rates, low
wire consumption and the
elimination of rejects
caused by solder flux or
heat damage results in the
lowest applied costs
■
Precisely controlled crimp
termination helps eliminate
human error for maximum
reliability
■
Splice up to 3 magnet wires
together with stranded lead
in one barrel
Applications
■
Motor windings and
connections
■
Coil connections
■
Transformer windings and
connections
■
Solid wire connections
■
Lighting ballasts
■
Power supplies
■
Starters and alternators
Tyco Electronics offers a
full selection of AMPLIVAR
splices that are specifically
designed to terminate
magnet wire to itself or in
combination with standard
solid or stranded lead wire.
AMPLIVAR splices have
machined, sharp edged
serrations inside the crimp
barrels. These serrations,
made by a special
production process, pierce
the insulating layer of
magnet wires in a manner
that provides a large
contact area.
In a one-step operation the
magnet wire is automatically
multiple ring-stripped of its
insulation as it is forced into
the serrations during the
precisely controlled crimp.
pre-stripped solid or
stranded lead wires.
The resulting termination
produces a high tensile
strength, air-sealed
connection that is as
resistant to corrosion as the
insulated conductor.
Depending on your specific
application, AMPLIVAR
splices are available in 5,
7 and 9 serration versions
for terminations in the 100
to 22,000 CMA range as
well as miniature and
subminiature designs for
terminations in the 100 to
1850 CMA range.
As many as three magnet
wires can be terminated
simultaneously in one
splice. In addition, copper
or aluminum magnet wire,
or a combination of both,
can be terminated.
When required, copper or
aluminum magnet wire can
be combined with standard,
AMPLIVAR Splices
■
The crimping of AMPLIVAR
splices is done by semiautomatic crimping
machines for high output
per hour production rates.
Stranded Wire
on top
Magnet Wire
on bottom
Section AA
43
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices (Continued)
Test Results
Applicable Types of Wire —
Cu, Al (Solid) together or in
combination with stranded
lead wire
Wire Size Range —
from 300 to 13,000 CMA
(0.1 mm2 to 6.6 mm2)
Terminal Base Material —
Brass, phosphor bronze
Surface Finish — plain and
tin plated except where noted
Temperature Range —
–65°C to +150°C
Rated Current — according
connected wire size
Rated Voltage — according
terminated winding
The AMPLIVAR products have
been subjected to the following
tests without significant millivolt
losses.
Temperature Cycling —
25 cycles with each cycle
consisting of 30 minutes at
+125°C followed by 30 minutes
at –65°C
Heat Age — 96 hours at +150°C
Thermal Shock — 25 cycles
with each cycle consisting of
30 minutes at +150°C followed
by 30 minutes at –65°C
Salt Spray — 96 hours at
+35°C with a 5% salt solution
spray
Humidity — 96 hours at
90–95% relative humidity and
+40°C
Current Cycling — 10,000
cycles with each consisting of
3 minutes on and 3 minutes
off at a current (25 A) which
establishes a wire temperature
of +150°C
AMPLIVAR Splices
Technical Features
44
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices (Continued)
General Application Guidelines
Suggested Splice Selection Procedure
To assist you in obtaining the optimum AMPLIVAR splice
termination, the following guidelines are recommended:
Use the following guide to help you to determine the proper
splice for your application:
1. All magnet wires must be
placed in the bottom of
the wire barrel before
crimping. If lead wire is to
be crimped in the same
termination, it should be
placed on top of the
magnet wires.
1. Use 9-serration splices,
tin plated when
terminating aluminum
magnet wire or
combinations with
aluminum magnet wire.
2. Wire barrels are
designed to accept a
maximum of three
insulated magnet wires
plus stranded lead wires.
3. The ratio of magnet wire
diameters crimped in any
wire barrel should not
exceed 2:1. This ratio is
approximately a range
from the largest to the
smallest magnet wire of
six sizes.
5. The sum of the diameters
of the individual magnet
wires plus twice the
terminal stock thickness
must be equal to or less
than the crimp width.
7. Magnet wire of 20 AWG
[0.81 mm] or larger
having an insulation
thickness heavier than
“single film coated,”
should not be used with
splices having “shallow
serrations” (those part
numbers marked with an
asterisk [*] in the tabular
data on the following
technical pages).
8. When aluminum magnet
wire is used, splices and
terminals must be tin
plated.
9. Consult Tyco Electronics
for splice and terminal
selection and
recommendations for
all non-standard
applications.
2. Use 9-serration splices
for hermetic and severe
environment applications.
3. Use splices identified
with an asterisk [*] when
terminating 7-serration
26 AWG [0.40 mm]
or smaller wires and
9-serration 28 AWG [0.32
mm] or smaller wires.
4. Calculate the total CMA
of the magnet wires plus
any lead wires to be
terminated. Always use
the coated magnet wire
for CMA.
■
114-2003
114-2005
AMPLIVAR
7-Serration
Pigtail Splices
AMPLIVAR
9-Serration
Pigtail Splices
AMPLIVAR
Subminiature
Thru Splices
■
■
114-2006
114-2009
114-2016
AMPLIVAR
Subminiature
Pigtail Splices
AMPLIVAR
5-Serration
Thru Splices
AMPLIVAR
Miniature
Pigtail Splices
7. Calculate the sum of the
magnet wire diameters
plus two splice stock
thicknesses. If this total is
less than the crimp width
of the splice selected, it
may be used. If the total
is greater than the crimp
width, a splice with a
greater crimp width must
be selected. Consult
Tyco Electronics for
special wide tooling
recommendations.
Selection of a Pigtail Splice to terminate the following wires:
One 28 AWG [0.32 mm] copper magnet wire.
One 22 AWG [0.64 mm] aluminum magnet wire.
One 18 AWG [0.8–0.9 mm2] 19-strand copper lead wire.
Application Specifications describe requirements for using the
product in its intended application and or crimping information.
They are intended for the Packaging and Design Engineer and the
Machine Setup Person.
114-2002
6. Select a splice for trial
calculations. It should
have the proper CMA
range. Plating finish
should be considered at
this time.
Example:
■
Technical Documents
5. Calculate the total
magnet wire diameters.
AMPLIVAR Splices
4. The sum of the circular
mil area (CMA) of the
magnet wires and any
lead wires should not
exceed the capacity of
the splice.
6. Magnet wire of 26 AWG
[0.40 mm] or smaller
should be used with
7-serration splices having
“shallow serrations,” and
magnet wire of 28 AWG
[0.32 mm] or smaller
should be used with
9-serration splices having
“shallow serrations” (part
numbers identified with
asterisk [*] are in the
tabular data on the
following technical
pages).
Calculate the total CMA (Procedure 4):
28 AWG [0.32 mm] coated magnet wire
22 AWG [0.64 mm] coated magnet wire
18 AWG [0.8–0.9 mm2] stranded lead wire
= 185 CMA
= 708 CMA
= 1608 CMA
Total
= 2501 CMA
Calculate the sum of the magnet wire diameters (Procedure 5):
28 AWG [0.32 mm] coated magnet wire
22 AWG [0.64 mm] coated magnet wire
= .0136 [0.35]
= .0266 [0.68]
Total
= .0402 [1.03]
Select a terminal for trial calculations. Splice No. 62305-2,
page 46 (Procedure 6):
CMA range
Stock thickness
Crimp width
= 600–3000
= .016 [0.41]
= .110 [2.79]
9-serration, tin plated for aluminum magnet wire (Procedure 1).
Splice identified with asterisk [*] for 28 AWG [0.32 mm]
(Procedure 3).
■
Calculate the sum of the magnet wire diameters plus two splice
stock thicknesses (Procedure 7):
.0402 + (.016 x 2) = .0722
[1.02 + (0.41 x 2) = 1.84
.0722 [1.84] is less than the splice crimp width of .110 [2.79];
therefore, Part No. 62305-2 may be used.
45
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices (Continued)
9 Serrations —
Pigtail Type
Product Facts
(Plus All 7 Serration Facts)
■
■
■
■
AMPLIVAR Splices
■
■
Splice length is increased
on larger CMA splices for
improved performance
AWG/
mm2
24-18.5
0.26-0.80
22-15.5
0.38-1.54
22-15.5
0.38-1.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
15.5-12
1.54-3.46
13.5-10
2.54-4.90
12-9
3.46-6.38
10-6.5
4.90-9.45
Serration depths are
varied within the splice
to give optimum electrical/
mechanical performance on
all wire sizes
Serration sidewall angles
are varied to allow better
wire stripping and
serration fill
Flat bottom of splice helps
keep magnet wires on
bottom as required during
crimping
Magnet wires 28 AWG
[0.32 mm] and larger may
be terminated without
requiring shallow serrations
■
■
■
Dim.
L
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.265
6.73
.265
6.73
.265
6.73
.340
8.64
Material
Part
Number
Tin Plated Brass
62303-2*
Tin Plated Brass
62304-2*
Tin Plated Brass
62305-2*
Tin Plated Brass
62306-2*
Tin Plated Brass
62307-2*
Tin Plated Brass
62308-2*
Tin Plated Brass
62309-2*
Tin Plated Brass
62310-2*
Tin Plated Brass
62311-21*
*These splices are recommended for applications using wire size 28 AWG [0.32 mm] or smaller.
Special high force application equipment required.
Additional serrations
enhance stability of crimp
AWG/
mm2
22-15.5
0.38-1.54
22-15.5
0.38-1.54
22-15.5
0.38-1.54
22-15.5
0.38-1.54
22-15.5
0.38-1.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
15.5-12
1.54-3.46
15.5-12
1.54-3.46
15.5-12
1.54-3.46
12-10
2.10-6.0
12-10
2.10-6.0
12-9
2.10-6.38
Product Facts
■
Crimp
Width
.080
2.03
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.140
3.56
.180
4.57
.180
4.57
.220
5.59
1
7 Serrations —
Pigtail Type
■
Wire Range Wire Range
Stock
Solid Dia.
CMA
Thickness
.020-.039
.016
400-1500
0.55-1.00
0.41
.028-.055
.020
600-3000
0.70-1.40
0.51
.028-.055
.016
600-3000
0.70-1.40
0.41
.039-.071
.020
1500-5000
1.00-1.80
0.51
.039-.071
.016
1500-5000
1.00-1.80
0.41
.055-.083
.020
3000-7000
1.40-2.10
0.51
.071-.098
.025
5000-10,000
1.80-2.50
0.64
.083-.112
.025
7000-13,000
2.10-2.85
0.64
.098-.137
.030
10,000-22,000
2.50-3.47
0.76
Taper on both crimper and
anvil improves flex life of
termination
Longer “flat” on tooling
improves electrical
performance (.125 vs. .080
[3.18 vs. 2.03])
Radius on wire entry end
of splice helps prevent
nicking wires and improves
mechanical performance
Serrations are offset to
sheared end to place
additional serrations in
“electrical” portion of
crimped splice
Splice CMA ranges are
overlapped so that two
splices are available for any
given CMA
Wire Range
Solid Dia.
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.039-.071
1.00-1.80
.039-.071
1.00-1.80
.039-.071
1.00-1.80
.055-.083
1.40-2.10
.055-.083
1.40-2.10
.055-.083
1.40-2.10
.085-.110
2.10-2.85
.085-.110
2.10-2.85
.085-.115
2.10-3.47
Wire Range
CMA
600-3000
600-3000
600-3000
600-3000
600-3000
1500-5000
1500-5000
1500-5000
3000-7000
3000-7000
3000-7000
7000-12,000
7000-12,000
7000-13,000
Stock
Thickness
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.025
0.64
.025
0.64
.025
0.64
Crimp
Width
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.140
3.56
.140
3.56
.140
3.56
.250
6.35
.250
6.35
.180
4.57
Dim.
L
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
Material
Part
Number
Brass
62000-1*
Brass
62157-1*
Tin Plated Brass
62000-2*
Tin Plated Brass
62157-2*
Tin Plated Brass
62200-21
Brass
62040-2*
Tin Plated Brass
62040-1*
Phosphor Bronze
964156-1
Brass
62001-1*
Tin Plated Brass
62001-2*
Tin Plated Brass
62201-21
Tin Plated Brass
62295-1*
Brass
62295-2*
Tin Plated Brass
62002-2*
*These splices are recommended for applications using wire size 26 AWG [0.40 mm] or smaller.
Flat bottom.
1
46
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices (Continued)
7 Serrations —
Thru Type
Product Facts
■
L
Crimp bellmouth provides
retention in circular cavity
slot in bobbin
AWG/
mm2
22-15.5
0.38-1.54
Wire Range
Solid Dia.
.028-.055
0.70-1.40
Wire Range
CMA
600-3000
Stock
Thickness
.020
0.51
Crimp
Width
.110
2.79
Dim.
L
.225
5.72
Material
Part
Number
Tin Plated Brass
1217384-1**
*These splices are recommended for applications using wire size 26 AWG [0.40 mm] or smaller.
A
5 Serrations —
Thru Type
B
Product Facts
■
Wide range of thru splices
■
Serrations centered in splice
to achieve optimum
electrical and mechanical
performance in a thru splice
■
Type
A
B
Wire Range
Solid Dia.
.045-.075
1.15-1.85
12-9
3.00-7.00
.077-.118
1.95-3.00
10-8
5.00-8.00
10-7.5
5.00-11.50
22-15.5
0.38-1.54
22-15.5
0.38-1.54
22-15.5
0.38-1.54
22-15.5
0.38-1.54
22-15.5
0.38-1.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
18.5-13.5
0.80-2.54
15.5-12
1.54-3.46
15.5-12
1.54-3.46
15.5-12
1.54-3.46
15.5-12
1.54-3.46
12-10
3.46-6.00
12-9
3.46-6.38
12-9
3.46-6.38
12-9
3.46-6.38
12-9
3.46-6.38
.100-.125
2.55-3.20
.100-.150
2.60-3.80
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.028-.055
0.70-1.40
.039-.071
1.00-1.80
.039-.071
1.00-1.80
.039-.071
1.00-1.80
.039-.071
1.00-1.80
.039-.071
1.00-1.80
.055-.083
1.40-2.10
.055-.083
1.40-2.10
.055-.083
1.40-2.10
.055-.083
1.40-2.10
.083-.110
2.10-2.80
.083-.112
2.10-2.85
.083-.112
2.10-2.85
.083-.112
2.10-2.85
.083-.112
2.10-2.85
Wire Range
Stock
CMA
Thickness
.020
2000-5400
0.51
Crimp
Width
.110
5.08
Dim.
L
.235
5.97
Material
6000-14,000
.025
0.64
.180
4.57
.265
6.73
Brass
Tin Plated Brass
1217990-1
1217990-2
10,000-16,000
.032
0.80
.030
0.76
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.025
0.64
.180
4.57
.300
7.62
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.110
2.79
.140
3.56
.140
3.56
.140
3.56
.140
3.56
.250
6.35
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.267
6.78
.310
7.87
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
.225
5.72
Tin Plated Brass
63561-1
Tin Plated Brass
63562-1
10,400-22,900
600-3000
600-3000
600-3000
600-3000
600-3000
1500-5000
1500-5000
1500-5000
1500-5000
1500-5000
3000-7000
3000-7000
3000-7000
3000-7000
7000-12,000
7000-13,000
7000-13,000
7000-13,000
7000-13,000
Brass
Part
Number
63564-1
Brass
42076
Brass
42192-1*
Tin Plated Brass
42192-2*
Brass
42778-1*1
Tin Plated Brass
42778-2*1
Brass
41765
Tin Plated Brass
41899
Brass
42119-1*
Brass
42776-1*1
Tin Plated Brass
42776-2*1
Brass
41766
Tin Plated Brass
41900
Brass
42779-11
Tin Plated Brass
42779-21
Tin Plated Brass
61074-11,2
Brass
41770
Tin Plated Brass
41904
Brass
42780-11
Tin Plated Brass
42780-21
AMPLIVAR Splices
CMA range accepts a wide
variety of wire sizes and
combinations
AWG/
mm2
17-12.5
1.00-2.80
* These splices are recommended for applications using wire size 26 AWG [0.40 mm] or smaller.
Increased terminal pitch.
2 Increased U-diameter.
1
47
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Splices (Continued)
5 Serrations —
Pigtail Type
Product Facts
■
■
Serration depths are varied
within the splice to give
optimum electrical /
mechanical performance on
all wire sizes
Flat bottom of splice helps
keep magnet wires on
bottom as required during
crimping
L
AWG/
mm2
20-17
0.50-1.00
Wire Range
Solid Dia.
.030-.045
0.80-1.15
Wire Range
CMA
1000-2000
Stock
Thickness
.016
0.41
Crimp
Width
.100
2.54
Dim.
L
.225
5.72
Material
Part
Number
Tin Plated Brass
62670-2*1
*These splices are recommended for applications using wire size 26 AWG [0.40 mm] or smaller.
Flat bottom.
1
Miniature Splice —
Pigtail Type
Product Facts
AMPLIVAR Splices
■
■
The Miniature AMPLIVAR
splice was developed for
crimping thinner copper
magnet wires having a
diameter between .003 and
.016 [0.08 and 0.40 mm]
and has to be connected
with a stranded conductor
The diameter of one
conductor strand should not
exceed the magnet wire
diameter to be applied
AWG/
mm2
27-21
0.10-0.40
25-18
0.16-0.90
24-18.5
0.20-0.75
24-18.5
0.20-0.75
24-18
0.20-0.80
Wire Range
Solid Dia.
.014-.030
0.35-0.75
.015-.045
0.45-1.10
.020-.039
0.55-1.00
.020-.039
0.55-1.00
.020-.040
0.55-1.00
Wire Range
CMA
AWG/
mm2
30-26
0.05-0.15
24-19
0.26-0.60
24-19
0.26-0.60
Wire Range
Solid Dia.
.010-.015
0.30-0.50
.020-.035
0.55-0.90
.020-.035
0.55-0.90
Wire Range
CMA
200-850
300-1850
480-1500
480-1500
480-1700
Stock
Thickness
.012
0.30
.012
0.30
.014
0.36
.014
0.36
.016
0.41
Crimp
Width
.055
1.40
.070
1.78
.080
2.03
.080
2.03
.070
1.78
Dim.
L
.195
4.95
.195
4.95
.195
4.95
.195
4.95
.195
4.95
Stock
Thickness
.010
0.25
.016
0.41
.016
0.41
Crimp
Width
.042
1.08
.070
1.78
.070
1.78
Dim.
L
.080
2.03
.100
2.54
.100
2.54
Material
Part
Number
Tin Plated Brass
63431-1
Copper-Nickel
61166-1
Tin Plated Brass
62341-1
Brass
62341-2
Brass
62044-1
Material
Part
Number
Tin Plated Brass
63621-2
Tin Plated Brass
62194-2
Gold Plated Brass
62194-4
Subminiature Splice —
Thru or Pigtail Type
Product Facts
■
■
The compactness of these
splices makes them ideal
for use in small subfractional
motors, transformers,
relays, solenoids, indicator
lamps and small appliance
terminations
These splices provide the
same reliability as the
larger AMPLIVAR splices
100-300
400-1300
400-1300
48
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Application Tooling
AMPLIVAR Product
Terminator (APT)
Product Facts
■
No need to strip magnet
wire
■
Connects up to 3 wires in
1 splice
■
Crimp Quality Monitor
(CQM) system measures
crimp heights
■
Machine shut height easily
adjusts in .0005 [0.013]
increments
■
Quick-change tooling without major shut-height
adjustments
Specifications
APT III A
For pigtail splice connection
of magnet wire, the
AMPLIVAR Product
Terminator (APT) and stripform AMPLIVAR products
offer a fast and efficient
system, with no need to
strip mag-wire insulation.
To apply a splice, simply
place the wires in the target
area and depress the foot
switch. The machine
automatically shears the
splice from the strip, crimps
it, shears off excess wire,
and advances the next
splice into position.
APT semi-automatic bench
machines are available in
two versions: the IIIA with
automatic precision
adjustment controlled by
the Crimp Quality Monitor
(CQM), and the IIE with
manual precision
adjustment.
With CQM, the APT IIIA
assists in achieving 6-sigma
processing capability. In
addition to providing 100%
inspection and automatic
adjustment of crimp heights
as needed, the CQM also
evaluates the quality of
each crimp. If a
questionable crimp is
detected, visual and
audible alarms alert the
operator.
For operations with multiple
wire sizes, the APT IIIA
provides programmable
sequencing of different
crimp-height settings, and
it can store up to 2,000
different programs of 7
different settings each.
The maximum time to
auto-adjust between
programmed crimp heights
is 2 seconds.
APT III A with vertical base
(679984-1) for direct connect
terminals
AMPLIVAR Splices
Weight — Approximately 150 lb
[68 kg] with CQM
Width — 38 [965] with CQM and
product reel
Depth — 35 [889]
Height — 14 [356]
Electrical — 120 VAC, 60 Hz, 1 A, 1f,
or 240 VAC, 50 Hz, .5 A, 1f
Air — 80-100 psi [5.52-7.59 bar],
22 scfm [0.000141 m3/s]
The lower cost, manual
adjust IIE is a simpler
version without CQM
capability, with the
advantage of faster
set-up times.
To avoid the need to
change product reels when
wire combinations are
smaller than the CMA range
of the splice, an optional
stuffer (part no. 679323-1 for
APT IIIA, part no. 679323-2
for APT IIE.) inserts a stuffer
wire into the splice prior
to crimping, increasing
the total CMA to the
recommended range.
The wire stuffer unit is for
pigtail splices only.
APT II E
49
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
AMPLIVAR Application Tooling (Continued)
AMPLIVAR Product
Terminator (APT) (Continued)
Machine Ordering Information
A “Base Part Number” is
selected from the Basic
Machine Part Numbers
table. Then, a dash number
or numbers are selected
from one of the other two
tables depending on the
type of product to be
applied.
AMPLIVAR Splices
Note: The wire stuffer is
available for Pigtail-Type
Splice only and may be
added to the machine after
installation.
679323-1 — APT IIIA
679323-2 — APT IIE
Basic Machine Part Numbers
Machine Features
Precision
Adjust
Crimp Quality
Monitor
Manual
Automatic
Not included
Included
Base Part Number*
Programmable
Crimp-Height
Sequencing
Not included
Included
Model
APT IIE**
APT IIIA
Pigtail-type
Splice
-1338906-
-679453-
*See tables below for suffix and prefix dash numbers which indicate product to be applied, product crimp width, and
voltage requirement.
**Not upgradable to an APT IIIA
AMPLIVAR Pigtail-Type Splice Suffix and Prefix Dash Numbers
(Aluminum base 679984-1 not included)
Pigtail-type
Splice
Base Number
42775
42776
42777
42778
42779
62000
62001
62001
62201
62002
62040
62157
62200
62295
62303
62304
62305
62306
62306
62307
62308
62308
62309
62309
62310
62310
280002
280004
964156
Crimp
Width
120/240 VAC
IIE Machine
-1338906-
120/240 VAC
IIIA Machine
-679453-
.110 [2.79]
1-( )-1
3-( )-7
.110 [2.79]
1-( )-2
3-( )-8
.140 [3.56]
.110 [2.79]
.140 [3.56]
.180 [4.57]
.140 [3.56]
.180 [4.57]
.110 [2.79]
( )-8
1-( )-2
( )-7
( )-6
( )-8
( )-3
1-( )-1
3-(
3-(
3-(
3-(
3-(
2-(
3-(
.110 [2.79]
1-( )-2
3-( )-8
.250 [6.35]
.080 [2.03]
( )-1
1-( )-3
2-( )-7
3-( )-9
)-4
)-8
)-3
)-2
)-4
)-9
)-7
.110 [2.79]
1-( )-2
3-( )-8
.140 [3.56]
1-( )-0
3-( )-6
.110 [2.79]
1-( )-1
3-( )-7
.140 [3.56]
.180 [4.57]
.220 [5.59]
.180 [4.57]
.220 [5.59]
.180 [4.57]
.110 [2.79]
.110 [2.79]
.110 [2.79]
( )-9
( )-6
5-( )-4
( )-5
( )-2
( )-4
1-( )-1
1-( )-2
1-( )-1
3-(
3-(
5-(
3-(
2-(
3-(
3-(
3-(
3-(
)-5
)-2
)-3
)-1
)-8
)-0
)-7
)-8
)-7
50
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Pins, Receptacles, Tab and Taper Tab Receptacles Terminals
Product Facts
■
Pin terminals are available
in .080, .093, .109 and .125
diameters.
■
Receptacle terminals are
available that accept .032,
.040, .050, .055, .062,
.090, .093 and .109 pin
diameters
■
SHUR-PLUG terminals and
Receptacle terminals are
available in .156 and .180
diameters.
■
Tab Receptacle terminals
are available that accept tab
thicknesses ranging from
.010 - .060 and widths
ranging from .025 - .250.
■
Taper Tab Receptacle
terminals are available in
78 Series and 98 Series
■
Precision formed, strip-fed
pins, receptacles and tab
receptacle terminals terminated in AMP automatic
machines for high production rates per hour
Application Specifications describe
requirements for using the product in its
intended application and/or crimping
information. They are intended for the
Packaging and Design Engineer and the
Machine Setup Person.
114-2080 — Pin Receptacle Contacts
114-2083 — Pin Receptacle Contact
114-2042 — .156 [3.96] Diameter
SHUR-PLUG and Receptacle Terminals
114-2017 — .180 [4.57] Diameter
SHUR-PLUG and Receptacle Terminals
Product Specifications
Product Specifications describe the
product qualification test results completed by Tyco Electronics for consideration of product use in a specific
application. They are intended for the
Design and Product Reliability Engineer.
108-2027 — .156 [3.96] Diameter
SHUR-PLUG and Receptacle terminals
Pin terminals are available
in .080, .093, .109 and .125
diameters to mate to industry standard or customer
specific receptacle terminals. They are designed
with and/or without insulation barrel supports, including one with an insulation
piercing wire barrel to terminate flat wire while others
are specifically designed
for post overmolding.
Depending on your specific
application, pin terminals
are available for terminations in the 14–30 AWG wire
range in brass and tin
plated brass material.
Receptacle terminals are
available to accept .032,
.040, .050, .055, .062, .090,
093 and .109 pin terminal
diameters to mate to industry standard or customer
specific pin terminal
requirements. They are
designed with and/or
without insulation barrel
supports for terminations
ranging from 20–32 AWG
stranded or solid wire as
well as magnet wire ranging
from 29–16 AWG. Some
terminals are designed with
or without locking feature
and others are specifically
designed for post overmolding. Receptacle terminals
are manufactured in brass
and phosphor bronze material with tin, silver and gold
plating options available.
SHUR-PLUG terminals and
SHUR-PLUG Receptacle
terminals that are
specifically designed for
wiring harnesses used in
the truck, bus, marine and
off-highway vehicle marketplace. SHUR-PLUG terminals are available in .156
and .180 diameters that
accept wire ranging from
24–5 AWG gage. They are
available with or without
insulation support barrels
with various part numbers
available for post overmolding and one specifically
designed for a weld
connection. SHUR-PLUG
terminals are manufactured
in brass material with tin or
tin over nickel plating
options available.
Tab Receptacle terminals
are available to mate to
industry standard and
customer specific tab
applications. They accept
tab thicknesses ranging
from .010–.060 in widths
ranging from .025–.250.
They accept wire ranging
from 26–14 AWG and are
available with or without
insulation support barrels.
Tab Receptacles are
manufactured in brass and
beryllium copper material
with tin and gold plated
versions available.
Pin Terminals
Technical Documents
Tyco Electronics offers a
full selection of AMP open
barrel pins, receptacles and
tab receptacle terminals that
are specifically designed to
terminate various stranded
and solid wire ranges for
customer specific application requirements.
Taper Tab Receptacle terminals are available in 78
Series and 98 Series with
insulation support. They
terminate 24–22 AWG wire
in tin plated brass material.
The 78 Series insulation
piercing terminals are manufactured in brass material
with tin, nickel and gold
plating options that terminate tinsel wire.
Pins, Receptacles and Tab
Receptacle terminals are
manufactured in strip form
and supplied on reels for
semi-automated and fully
automated terminations on
crimping machines for high
output per hour production
rates.
51
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Pin Terminals
B
C
D
E
F
Wire Range
AWG
mm2
Type
Pin Terminals
A
Insul.
Size
Pin
Dia.
Stock
Thk.
Material
and Finish
.080
2.03
.125
3.18
.125
3.18
.080
2.03
.080
2.03
.125
3.18
.125
3.18
.130
3.30
.093
2.36
.109
2.77
.109
2.77
.109
2.77
.010
0.25
.016
0.41
.016
0.41
.010
0.25
.010
0.25
.016
0.41
.016
0.41
.016
0.41
.012
0.31
.016
0.41
.016
0.41
.020
0.51
Tin Plated Brass
A
30-26
0.05–0.12
F
24-20
0.2–0.6
E
24-20
0.2–0.6
.042–.073
1.07–1.85
.060–.103
1.52–2.62
.060–.103
1.52–2.62
A
24-20
0.2–0.6
.042–.073
1.07–1.85
E
22-20
0.4–0.6
.075–.090
1.91–2.29
C
22-18
0.3–0.9
—
B
22-16
0.3–1.4
—
B
18-14
0.9–2.0
—
D
.085 .035
2.16 0.89
Flat Wire
.085
2.16
Brass
Brass
Tin Plated Brass
Br. Tin Lead
Plated Brass
Brass
Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
W
.080
2.03
.125
3.18
.125
3.18
.080
2.03
.080
2.03
.125
3.18
.125
3.18
.130
3.30
.093
2.36
.109
2.77
.109
2.77
.109
2.77
Dimensions
L
1.280
32.51
.705
17.51
.705
17.51
1.000
25.40
1.000
25.40
1.393
35.38
1.393
35.38
.855
21.72
.835
21.21
.925
23.50
.920
23.37
.595
15.11
E
1.000
25.40
.450
11.43
.450
11.43
.720
18.29
.720
18.29
.800
20.32
.800
20.32
.660
16.76
.652
16.56
.500
12.70
.610
15.44
.350
8.90
Part
Number
350053-2
62074-1
62344-1
62358-1
62358-4
60115-11
60115-41
62505-1
62820-11
61013-21
62616-1
61674-12
Can be molded.
Insulation Piercing.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
1
2
52
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Receptacle Terminals
A
B
C
D
Type
Wire Range
AWG
mm2
Pin
Dia.
Stock
Thk.
Material
and Finish
.050
1.27
.040
1.02
.040
1.02
.040
1.02
.040
1.02
.050
1.27
.032
0.81
.093
2.36
.055
1.40
.055
1.40
.0623
1.57
.008
0.20
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.010
0.25
.013
0.33
.013
0.33
.010
0.25
Pre-Tin Plated
Phos. Bronze
32-26
0.03–0.15
.060
1.52 Max..
B
28-26
0.09–0.15
—
E
A
D
24-20
24-20
24-20
24-20
0.2–0.6
0.2–0.6
0.2–0.6
0.2–0.6
.048–.071
1.22–1.8
.090–.130
2.27–3.30
.048–.071
1.22–1.80
.070
1.78 Max..
Gold Plated Phos. Bronze
Tin Plated Phos. Bronze
Tin Plated Phos. Bronze
Silver Plated
Phos. Bronze
Tin Plated Phos. Bronze
Tin Plated Phos. Bronze
Brass
Gold/Nickel Plated
Phos. Bronze
Tin Plated Phos. Bronze
Pre-Tin Plated Brass
W
.070
1.78
.090
2.29
.090
2.29
.095
2.41
.095
2.41
.090
2.29
.095
2.41
.115
2.92
.095
2.41
.095
2.41
.100
2.54
Dimensions
L
.330
8.38
.370
9.40
.370
9.40
.450
11.43
.450
11.43
.360
9.14
.450
11.43
.560
14.23
.450
11.43
.450
11.43
.430
10.92
E
.150
3.81
.150
3.81
.150
3.81
.220
5.59
.220
5.59
.220
5.59
.220
5.59
.250
6.35
.220
5.59
.220
5.59
.190
4.83
Part
Number
61547-2
62185-1
62185-2
42428-51
42428-8
60348-4
60373-4
60469-1
Receptacle Terminals
Insul.
Size
C
A
E
60885-1
60885-22
61622-1
Reverse reel of 42428-2.
Reverse reel of 42429-2.
3 Or .045 [1.14] square post.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
1
2
53
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Receptacle Terminals (Continued)
Type
Receptacle Terminals
A
A
B
C
D
E
F
G
H
J
Wire Range
AWG
mm2
24-20
Insul.
Size
0.2–0.6
—
C
24-18
0.2–0.9
E
22-20
0.4–0.6
.045–.085
1.14–2.16
.075–.100
1.91–2.54
0.4–0.9
.090–.130
2.29–3.30
C
D
22-18
22-18
0.4–0.9
—
.100
2.54 Max..
.060 Max.
(2) 1.52
.
H
22-18
0.4–0.9
E
22-18
0.4–0.9
F
22-18
0.4–0.9
—
J
22-18
0.4–0.9
—
G
20-18
0.6–0.9
—
B
20-16
0.6–1.4
—
Pin
Dia.
Stock
Thk.
Material
and Finish
.040
1.02
.040
1.02
.040
1.02
.093
2.36
.106
2.69
.093
2.36
.093
2.36
.093
2.36
.093
2.36
.093
2.36
.106
2.69
.109
2.77
.109
2.77
.109
2.77
.125
3.18
.119
3.02
.090
2.29
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.012
0.31
.010
0.26
.012
0.31
.012
0.31
.014
0.36
.014
0.36
.014
0.36
.014
0.36
.016
0.41
.018
0.46
Tin Plated Phos. Bronze
Tin Plated Phos. Bronze
Tin Plated Phos. Bronze
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Silver Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Silver Plated Brass
Brass
Silver Plated Brass
Brass
Brass
Tin Plated Phos. Bronze
W
.090
2.29
.090
2.29
.100
2.54
.115
2.92
.150
3.81
.115
2.92
.115
2.92
.115
2.92
.115
2.92
.130
3.30
.150
3.81
.133
3.38
.133
3.38
.133
3.38
.150
3.81
.145
3.68
.235
5.97
Dimensions
L
.360
9.14
.360
9.14
.360
9.14
.560
14.23
.690
17.53
.560
14.23
.560
14.23
.560
14.23
.530
13.46
.480
12.19
.690
17.53
.585
14.86
.585
14.86
.585
14.86
.635
16.13
.375
9.53
.660
16.76
E
.220
5.59
.220
5.59
.200
5.08
.250
6.35
.360
9.14
.250
6.35
.250
6.35
.250
6.35
.345
8.76
.150
3.81
.360
9.14
.250
6.35
.250
6.35
.250
6.35
.375
9.52
.125
3.18
.255
6.48
Part
Number
62160-1
42869-6
62405-2
42827-2
60908-1
41854
41870
41870-1
60440-1
60884-31
62402-12
62720-23
63594-1
63594-2
63381-1
40652
60733-14
Right angle pin entry.
Without ears.
Can be molded.
4 Corrugated serrations, Can be bent 90°.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
1
2
3
54
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Receptacle Terminals (Continued)
W
E
A
Type
A
B
Wire Range
AWG
mm2
20-14
Insul.
Size
0.6–2.0
.120–.170
3.04–4.31
B
18-16
0.9–1.4
.090–.120
2.29–3.05
C
18-14
0.9–2.0
—
0.9–2.0
.130–.175
3.30–4.45
D
18-14
C
Pin
Dia.
Stock
Thk.
Material
and Finish
.090
2.29
.090
2.29
.090
2.29
.093
2.36
.109
2.77
.109
2.77
#10
Screw
.018
0.46
.018
0.46
.018
0.46
.014
0.36
.014
0.36
.014
0.36
.016
0.41
Tin Plated Phos. Bronze
Tin Plated Phos. Bronze
Beryllium Copper
Tin Plated Brass
Brass
Tin Plated Brass
Brass
L
D
W
.235
5.97
.235
5.97
.235
5.97
.115
2.92
.133
3.38
.133
3.38
.212
5.38
Dimensions
L
.550
13.97
.550
13.97
.550
13.97
.560
14.22
.645
16.38
.645
16.38
.690
17.53
E
.250
6.35
.250
6.35
.250
6.35
.150
3.81
.300
7.62
.300
7.62
.250
6.35
Dimensions
L
.590
14.99
.660
16.76
E
.195
4.95
.255
6.48
Part
Number
42745-2
60376-11
60376-21
42101-22
61012-13
61012-33
42308-1
Without locking dimple.
Has locking feature for pin with indent.
3 Can be molded.
1
2
Type
1
Wire Range
AWG
mm2
B
Insul.
Size
Pin
Dia.
Stock
Thk.
Material
and Finish
.062
1.57
.090
2.29
.012
0.30
.018
0.46
Tin Plated Brass
A
29-22
0.28–0.64
.040–.060
1.02–1.52
B
21-16
0.72–1.29
—
Receptacle Terminals
A
Tin Plated Phos. Bronze
W
.084
2.13
.235
5.97
Part
Number
63506-11
60177-21
Magnet wire.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
55
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
SHUR-PLUG Terminals
.156 [3.96] Diameter
W
E
A
Type
Wire Range
AWG
mm2
Stock
Thk.
Material
and Finish
.018
0.46
.020
0.51
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
Pre-Tin Plated Brass
20-16
0.6–1.4
B
18-14
0.9–2.0
.095–.115
2.41–2.92
.125–.160
3.18–4.06
A
18-14
0.9–2.0
.085–.125
2.16–3.18
18-14
A
18-14
B
12 or
(2) 14 .
14-10 or
(2) 14 .
B
C
1
Insul.
Size
A
B
0.9–2.0
—
0.9–2.0
.085–.210
2.16–5.33
3.0 or
(2) 2.0 .
2.0–6.0 or
(2) 2.0 .
Weld Tab
B
—
—
—
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Tin Plated Brass
Pre-Tin Plated Brass
L
C
W
.160
4.06
.157
3.99
.160
4.06
.160
4.06
.160
4.06
.160
4.06
.160
4.06
.160
4.06
.160
4.06
Dimensions
L
.710
18.03
.535
13.59
.710
18.03
.710
18.03
.500
12.70
.710
18.03
.600
15.24
.625
15.88
.540
13.72
Part
Number
E
.345
8.76
.345
8.76
.345
8.76
.345
8.76
.300
7.62
.350
8.89
.300
7.62
.300
7.62
.300
7.62
61388-11
41698
60766-11
60766-21
61802-11
61891-21
63925-11
1742039-1
62829-1
Can be molded.
.180 [4.57] Diameter
W
E
A
Type
SHUR-PLUG Terminals
C
Wire Range
AWG
mm2
24-22
20-16
0.2–0.4
0.6–1.4
Insul.
Size
.058–.082
1.47–2.08
.090–.125
2.29–3.18
.090–.125
2.29–3.18
A
18-14
0.9–2.0
.120–.175
3.05–4.45
14-10
2.0–6.0
—
B
12-8
3.0–8.0
—
(2) 8
(2) 8.0
—
B
Stock
Thk.
Material
and Finish
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.018
0.46
.030
0.76
.030
0.76
Tin/Nickel Plated Brass
Tin/Nickel Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
Tin Plated Brass
Tin/Nickel Plated Brass
Pre-Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
L
C
W
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
.180
4.57
Dimensions
L
.885
22.48
.865
21.97
.740
18.80
.740
18.80
.740
18.80
.740
18.80
.740
18.80
.855
21.72
.855
21.72
.855
21.72
.865
21.97
1.555
34.50
1.555
34.50
E
.435
11.05
.435
11.05
.447
11.35
.447
11.35
.447
11.35
.447
11.35
.447
11.35
.435
11.05
.435
11.05
.435
11.05
.435
11.05
1.080
27.43
1.080
27.43
Part
Number
62416-11
1217104-11,2
505038-11
60793-11
62739-11
60660-11
60660-21
42865-11
42865-31
42865-51
63989-11
1217142-11
1217185-11
Can be molded.
Loose piece.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
1
2
56
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
SHUR-PLUG Receptacle Terminals
.156 [3.96] Diameter
A
Type
B
22-18
0.4–0.9
A
20-16
0.6–1.4
B
1
Wire Range
AWG
mm2
18-14
0.9–2.0
B
Insul.
Size
Stock
Thk.
Material
and Finish
.085–.125
2.16–3.18
.100–.140
2.54–3.56
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
Tin Plated Brass
.130–.175
3.30–4.45
W
.190
4.83
.190
4.83
.190
4.83
.190
4.83
.190
4.83
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Dimensions
L
.690
17.53
.705
17.91
.690
17.53
.690
17.53
.695
17.65
Part
Number
E
.250
6.35
.370
9.40
.345
8.76
.345
8.76
.345
8.76
42581-2
60017-3
42142-1
42142-2
63865-11
No indent.
.180 [4.57] Diameter
A
Type
A
B
Wire Range
AWG
mm2
20-16
20-16
0.6–1.4
0.6–1.4
Insul.
Size
.090–.120
2.29–3.05
.100–.140
2.54–3.56
.090–.125
2.29–3.18
A
18-14
0.9–2.0
14-10
2.0–6.0
—
C
12-8
3.0–8.0
—
(2) 8
(2) 8.0
—
Stock
Thk.
Material
and Finish
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
.016
0.41
Brass
Tin Plated Brass
Brass
Brass
Brass
Tin Plated Brass
Brass
Pre-Tin/Nickel Plated
Phos. Bronze
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Tin Plated Brass
C
W
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
.208
5.28
Dimensions
L
.785
19.94
.785
19.94
.715
18.16
.715
18.16
.785
19.94
.785
19.94
.785
19.94
.785
19.94
.785
19.94
.785
19.94
.785
19.94
.720
18.29
.720
18.29
.720
18.29
.720
18.29
.720
18.29
.770
19.56
.770
19.56
E
.420
10.67
.420
10.67
.360
9.14
.360
9.14
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
.420
10.67
Part
Number
42531-1
42531-2
42700-1
42700-32
42749-1
60798-2
60798-4
60799-21
60799-41
60799-51
SHUR-PLUG
Receptacle Terminals
.120–.175
3.05–4.45
B
61412-1
61412-2
42868-1
42868-2
42891-11
42891-21
1217070-1
1217074-1
1217074-2
No indent.
Reverse reel of Part Number 42700-1.
Note: The part numbers listed are for use with existing machine models. For AMP-O-LECTRIC Model G applicators part numbers, call the Technical Support
Center at 1-800-522-6752.
1
2
57
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Tab Receptacle Terminals
A
B
C
E
Type
B
G
A
Tab Receptacle Terminals
B
F
Wire Range
AWG
mm2
Insul. Dia.
Range
26-22
0.12–0.4
.035–.065
0.89–1.65
0.12–0.4
.035–.060
0.89–1.52
26-22
24-20
24-20
0.2–0.6
0.2–0.6
0.2–0.6
—
E
22-20
0.3–0.6
—
A
22-18
0.3–0.9
.060–.110
1.52–2.79
0.3–0.9
.050–.085
1.27–2.16
.080–.120
2.03–3.05
20-18
2
.040–.080
1.02–2.03
24-20
B
1
.040–.080
1.02–2.03
F
22-18
D
0.5–0.9
.080–.120
2.03–3.05
D
20-18
0.5–0.9
—
E
20-16
0.5–1.3
—
C
18-14
0.8–2.0
—
Available in Loose Piece form, order Part No. 61454-1.
Reverse reel of 60900-1.
G
Stock
Thk.
Material
and Finish
.010
0.25
.010
0.25
.008
0.20
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.010
0.25
.025
0.64
Pre-Tin Brass
3
4
Pre-Tin Brass
Gold Plated
Beryllium Copper
Brass
Gold Plated Brass
Tin Plated
Beryllium Copper
Gold Plated Brass
Tin Plated Brass
Tin Plated Brass
Gold Plated Brass
Tin Plated Brass
Gold Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Tin Plated Brass
Gold Plated Brass
Pre-Tin Brass
Pre-Tin Brass
Pre-Tin Brass
Pre-Tin Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Fits Tab
.031 .093
0.79 2.36
.014 .093
0.36 2.36
.025 .025
0.64 0.64
.045 .045
1.14 1.14
.045 .045
1.14 1.14
.045 .045
1.14 1.14
.031 .062
0.79 1.57
.023 .062
0.58 1.57
.031 .062
0.79 1.57
.031 .062
0.79 1.57
.031 .062
0.79 1.57
.031 .062
0.79 1.57
.031 .062
0.79 1.57
.015 .050
0.38 1.27
.037 .125
0.94 3.18
.031 .062
0.79 1.57
.031 .062
0.79 1.57
.010 .093
0.25 2.36
.010 .093
0.25 2.36
.032 .103
0.81 2.62
.020 .103
0.51 2.62
.020 .156
0.51 3.96
.010 .110
0.25 2.79
.032 .125
0.81 3.18
.060 .250
1.52 6.35
Loose Piece form, of Part No. 60900-1.
Loose Piece form, of Part No. 63391-2.
5
6
W
.120
3.05
.120
3.05
.085
2.16
.095
2.41
.095
2.41
.095
2.41
.090
2.29
.090
2.29
.090
2.29
.090
2.29
.090
2.29
.090
2.29
.090
2.29
.070
1.78
.160
4.06
.090
2.29
.090
2.29
.120
3.05
.120
3.05
.126
3.20
.126
3.20
.179
4.55
.148
3.76
.160
4.06
.250
6.35
Dimensions
L
.475
12.06
.475
12.06
.390
9.91
.372
9.45
.372
9.45
.372
9.45
.372
9.45
.372
9.45
.462
11.73
.462
11.73
.462
11.73
.462
11.73
.462
11.73
.310
7.87
.425
10.80
.372
9.45
.372
9.45
.480
12.19
.480
12.19
.480
12.19
.480
12.19
.480
12.19
.380
9.65
.330
9.65
.985
25.02
Compliant base.
No Dimple.
7
8
E
.190
4.83
.190
4.83
.090
2.29
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.130
3.30
.187
4.75
.187
4.75
.187
4.75
.187
4.75
.187
4.75
.145
3.68
.190
4.83
.130
3.30
.130
3.30
.190
4.83
.190
4.83
.200
5.08
.200
5.08
.200
5.08
.200
5.08
.090
2.29
.520
13.20
Part
Number
61813-16
62041-17
61941-1
60524-1
60524-3
60524-5
60477-1
60436-2
60900-11
60900-2
60900-42
60900-58
61454-13
62352-1
41989
61489-1
61616-1
63391-14,5
63391-25
60252-17
60432-17
62399-1
62589-1
63615-1
60312-1
Dimple.
Reverse reel of 60900-2.
58
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Taper Tab Receptacle Terminals
Precision formed taper tab
receptacles are available to
mate with tabs having front
end dimensions of .078
[1.98] and .098 [2.49].
These receptacles are
available in strip form, reel
fed for high speed automatic machine termination.
Taper Tab Specifications
Difference between these
two dimensions must be
held from .0115 to .0125
[0.29 to 0.32]
A
B
3 1/2° Ref.
Nom.
Taper Length
Min.
Tab Length
78 Series—Insulation Support
Wire Range
AWG
mm2
Insul. Dia.
Range
Dim.
L
Finish
24-22
.030–.050
0.76–1.27
.500
12.70
Tin
0.2–0.4
Strip Form Part Number
For Use With
For Use With
Standard Appl.
Miniature Appl.
—
42765-1
78 Series—Insulation Piercing
.200 1
[5.08]
.260
[6.60]
1 Intersection must be clean no offset
and no increase in taper (both sides)
over this length.
78 Series
A = .078 ± .001
[1.98 ± 0.03]
B = .090 ± .001
[2.29 ± 0.03]
Tab Thickness — .023/.016
[0.58/0.41]
Strip Form Part Number
For Use With
For Use With
Standard Appl.
Miniature Appl.
Wire Range
AWG
mm2
Insul. Dia.
Range
Dim.
L
Finish
Tinsel
—
60442-1
—
—
Nickel
60442-2
—
Tinsel
—
.366
9.30
.366
9.30
.500
12.70
Gold
Tinsel
.065–.075
1.65–1.91
.065–.075
1.65–1.91
.065–.075
1.65–1.91
Tin
42519-1
—
98 Series
A = .098 ± .001
[2.49 ± 0.03]
B = .110 ± .001
[2.79 ± 0.03]
Tab Thickness — .025/.016
[0.64/0.41]
98 Series—Insulation Support
Insul. Dia.
Range
Dim.
L
Finish
24-22
.040–.060
1.02–1.52
.562
14.27
Tin
0.2–0.4
Strip Form Part Number
For Use With
For Use With
Standard Appl.
Miniature Appl.
—
Taper Tab
Receptacle Terminals
Wire Range
AWG
mm2
60891-1
59
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Contact and Welding Tab Terminals
Contact and Welding
Tab Terminals
Product Facts
■
Welding Tab terminals
available for 26 -14 AWG
lead wire
■
Brush contacts available for
24–14 AWG lead wire
■
Button contacts available for
20–16 AWG lead wire
■
Grounding clip terminals
accept .019 - .071 panel
thicknesses
■
Non-insulated Wire Pins
available for lead wires
ranging from 10 to 22 AWG
lead wire
■
Non-insulated Wire Pins
available for magnet wire
leads ranging from 13–27
AWG
■
Precision formed, strip-fed
terminals terminated in
AMP automatic machines
for high production rates per
hour
Technical Documents
Application Specifications describe
requirements for using the product in its
intended application and or crimping
information. They are intended for the
Packaging and Design Engineer and the
Machine Setup Person.
114-2093 — Carbon Brush Contacts
114-2129 — Grounding Clip
Product Specifications
Product Specifications describe the
product qualification test results completed by Tyco Electronics for consideration of product use in a specific
application. They are intended for the
Design and Product Reliability Engineer.
108-1376 — Grounding Clip
Tyco Electronics offers a
full selection of AMP open
barrel miscellaneous contact
and welding tab terminals
that are specifically
designed to terminate
various stranded and solid
lead wire ranges for customer specific application
requirements.
Welding tab terminals are
available with and without
insulation support barrels
that terminate 26–14 AWG
lead wire. They are manufactured in brass, phosphor
bronze and steel material
with tin, nickel and gold
plating options available.
Brush contacts are manufactured without insulation
support barrels, one part
number being the exception, that terminate 24–14
AWG lead wire. They are
manufactured in brass and
phosphor bronze material
with silver plating as an
option.
Button contacts are available with and without insulation support barrels that
terminate 20 -16 AWG lead
wire. They are manufactured in brass material with
tin plated versions available
as well.
Grounding clip terminals
are available that can be
terminated to 22–14 AWG
lead wire and accept panel
thickness ranging from
.019–.071. They are
designed to pierce through
enameled painted sheet
metal panels in the appliance and lighting industry.
They are manufactured out
of stainless steel or tin
plated phosphor bronze
and steel material.
Special Tab Receptacles
are available without insulation support barrels that can
be terminated to 20–16
AWG lead wire. They are
manufactured in brass,
phosphor bronze and steel
with tin and silver plated
version available.
A Plug Blade terminal is featured and readily available
to terminate 20–18 AWG
lead wire in brass material.
Fuse terminals are available
for .250 [6.5] diameters
without insulation support
that can be terminated to
22–10 AWG lead wire.
They are manufactured in
brass material with tin
plated brass as an option.
Wire Strain Relief Clamps
are available for insulation
diameters ranging from
.150–.310. They are manufactured in aluminum, phosphor bronze and tin plated
steel.
A .250 Spark Plug
Receptacle is available that
is manufactured in nickel
plated steel.
A Thermal Protector Crimp
Pin is featured that can be
terminated directly to a thermal protector open barrel
that will accept 16-14 lead
wire. The terminal is manufactured in tin plated brass.
Non-insulated Wire Pins are
readily available for lead
wires ranging from 10 to 22
AWG lead wire. They are
manufactured in copper
zinc with pre-plated and
post plated tin and silver
plated versions options
listed. Nickel plated steel
terminals are also featured.
Non-insulated AMPLIVAR
Wire Pins with insulation
supports are available to
terminate directly to magnet
wire leads ranging from
13–27 AWG. They are manufactured in brass with preplated and post tin plated
versions available.
60
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Contact and Welding Tab Terminals (Continued)
Miscellaneous Contacts
and Weld Tabs
Embossment
L
Contact and Welding
Tab Terminals
E
W
A (Left Hand)
B
C
L
Embossment
E
E
L
W
A
E
Wire Range
AWG
mm2
L
E
W
F
L
G
Insul.
Dia.
Stock
Thickness
W
Dimensions
L
E
Tab
Direction
Material
Phosphor Bronze
Phosphor Bronze
Brass
Tin Plated Brass
Brass
42920-34
42920-44
155386-11,6
155386-21,6
155386-31,7
Part
Number
18-14
0.8-2.0
—
.020
0.51
.155
3.94
.340
8.64
.390
9.91
L.H.
R.H.
22-18
0.3-0.9
—
.016
0.41
.140
3.56
.740
18.80
.615
15.62
—
24-22
0.2-0.4
—
.470
11.94
.100
2.54
.375
9.53
.210
5.33
.345
8.76
62827-1
.055-.080
1.40-2.03
.600
15.24
.365
9.27
.685
17.40
.350
8.90
.540
13.72
Stainless Steel
—
Nickel Plated Steel
62062-1
0.12-0.40
.115
2.92
.090
2.29
.115
2.92
.140
3.56
.140
3.56
—
26-22
.008
0.20
.012
0.30
.008
0.20
.016
0.41
.016
0.41
—
Stainless Steel
61263-1
—
Nickel Plated Steel
62134-2
Brass
42349-12
B
C
E
W
W
D
Type
Embossment
D
18-14
0.8-2.0
—
E
18-14
0.8-2.0
—
—
F
20-16
0.5-1.4
—
.020
0.51
.125
3.18
.270
6.86
.175
4.45
—
G
20-16
0.5-1.4
.090-.130
2.29-3.30
.020
0.51
.125
3.18
.365
9.27
.165
4.19
—
Tin Plated Steel
Nickel Plated Steel
Tin Plated Steel
Gold Plated Steel
Tin Plated Steel
Tin Plated Steel
62153-13
63701-14
40990-14
40990-25
60581-15
1217510-13
.062 [1.57] diameter hole in tab.
Tab bent up 60° in applicator.
3 Tab embossment up.
4 Tab embossment down.
5 No tab embossment.
6 Standard applicator reeling.
7 Mini applicator reeling.
1
2
61
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Contact and Welding Tab Terminals (Continued)
Brush Contacts
L
Embossment
Embossment
L
Contact and Welding
Tab Terminals
Embossment
E
E
L
E
W
W
W
A (Right Hand)
B
C (Left Hand)
E
F
E
L
W
D
Wire Range
AWG
mm2
Type
Insul.
Dia.
Stock
Thickness
W
Dimensions
L
E
.215
5.46
.425
10.80
.425
10.80
.435
11.05
.640
16.25
22-17
Magnet Wire
0.3-1.0
Magnet Wire
—
.020
0.51
18-14
0.8-2.0
—
.020
0.51
A
.187
4.75
.125
3.18
Tab
Direction
Material
L.H.
R.H.
R.H.
L.H.
Phosphor Bronze
Phosphor Bronze
Phosphor Bronze
Phosphor Bronze
62214-1
62214-2
60812-1
60812-2
Phosphor Bronze
350010-1
Phosphor Bronze
Silver Plated Ph Bz
Phosphor Bronze
Silver Plated Ph Bz
Phosphor Bronze
Phosphor Bronze
Phosphor Bronze
Phosphor Bronze
62008-11
62008-21
62009-11
62009-21
63182-11
63183-11
1217698-1
1217698-2
R.H.
R.H.
B
20-14
0.5-2.0
—
L.H.
C
20-18
0.5-0.8
—
.012
0.30
.125
3.18
.330
8.38
.305
7.75
D
20-16
0.5-1.4
—
Brass
61524-22
—
—
Brass
61933-12
—
.275
6.98
.210
5.33
.185
4.70
.210
5.33
.185
4.70
.775
19.69
—
0.2-0.6
.240
6.10
.285
7.24
.312
7.29
.285
7.24
.360
9.14
.255
6.48
.240
6.10
24-20
.018
0.46
.018
0.46
.016
0.41
.018
0.46
.016
0.41
.016
0.41
—
—
Brass
63020-12
—
—
Brass
1217507-12
—
—
Brass
63930-12
.355
9.02
—
Brass
61390-1
20-16
F
2
.187
4.75
.425
10.80
R.H.
L.H.
L.H.
R.H.
E
1
.018
0.46
.620
15.75
Part
Number
18-14
0.5-1.4
—
0.8-2.0
.110-.160
2.79-4.06
.495
12.57
.300
7.62
Tab lock crimp.
Carbon brush application equipment available.
62
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Miscellaneous Terminals
Button Contacts
W
L
A
B
Miscellaneous Terminals
W
L
C
Type
A
Wire Range
AWG
mm2
20-16
0.5-1.4
D
Insul.
Dia.
Stock
Thickness
.090-.120
2.29-3.05
.016
0.41
Dimensions
W
L
E
.195
.240
—
4.95
6.10
.195
4.95
B
20-16
0.5-1.4
.090-.125
2.29-3.18
.016
0.41
.310
7.87
—
.240
6.10
C
D
20-16
20-16
0.5-1.4
0.5-1.4
Part
Number
Material
—
.016
0.41
.195
4.95
.235
5.97
—
—
.020
0.51
.230
5.84
.175
4.45
.0603
1.52
Brass
42218-31
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Tin Plated Brass
Brass
Brass
Brass
61165-12
61165-22
61039-1
505034-1
505034-22
505034-32
61280-1
61280-22
Brass
406623
fits .150 [3.81] dia hole
alternate reeling direction for mini applicator compatibility
3 tab bent down in applicator
1
2
W
W
Grounding Clips
E
L
E
L
A
Type
A
B
C
Wire Range
AWG
mm2
Insul. Dia.
Range
18-14
.090-.125
2.29-3.18
22-18
18-14
0.8-2.0
0.3-0.8
0.8-2.0
—
.100-.140
2.54-3.56
B
Application
Panel Thk.
Stock
Thk.
.020-.030
0.51-0.76
.047-.057
1.19-1.45
.020-.040
0.51-1.02
.020-.040
0.51-1.02
.019-.071
0.48-1.80
.020
0.51
.020
0.51
.020
0.51
.020
0.51
.020
0.51
W
.140
3.56
.190
4.83
.140
3.56
.140
3.56
.615
15.62
Dimensions
L
.730
18.54
.730
18.54
.620
15.75
.620
15.75
.675
17.10
C
E
.382
9.70
.382
9.70
.440
11.18
.440
11.18
.440
11.18
Material
Part
Number
Stainless Steel
63895-1
Stainless Steel
1217012-1
Tin Plated Steel
63733-1
Tin Plated Phos. Bronze
63733-2
Stainless Steel
63575-1
63
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Miscellaneous Terminals
Tab Receptacles — Special
Miscellaneous Terminals
A
Twist Lock Receptacle
Type
A
1
Wire Range
AWG
mm2
20-16
0.5-1.4
B
Receptacle, 250 Series
C
Receptacle
Dimensions
L
E
Insul.
Dia.
Stock
Thickness
W
—
.025
0.64
.320
8.13
Material
Part
Number
.905 .665
23.00 16.89
Tin Plated Phos Bz
Tin Plated Phos Bz
Silver Plated Phos Bz
63035-1
63863-1
63863-2
18-14
0.8-2.0
B
20-16
0.5-1.4
—
.025
0.64
.200
5.08
.995 .790
25.27 20.06
Brass
62281-1
C
20-16
0.5-1.4
—
.025
0.64
.270
6.86
1.000 .750
25.40 19.05
Tin Plated Steel
Tin Plated Steel
Tin Plated Phos Bz
62727-1
63723-11
63723-21
Includes locking feature similar to style A.
Plug Blade
E
W
L
A
Type
A
Wire Range
AWG
mm2
20-18
0.5-0.9
Fuse Receptacles —
.250 [6.35] Dia.
Insul.
Dia.
Stock
Thickness
—
.020
0.51
Dimensions
W
L
E
.250 .995 .845
6.35 25.27 21.46
Material
Part
Number
Brass
156523-1
L
E
L
E
ØW
ØW
Embossment
A
Type
A
B
Wire Range
AWG
mm2
22-18
0.3-0.9
16-14
1.3-2.0
12-10
3.0-6.0
22-18
0.3-0.9
16-14
1.3-2.0
B
Dimensions
L
E
Insul.
Dia.
Stock
Thickness
W
—
.020
0.51
.250
6.35
—
.020
0.51
.250
6.35
.475
12.07
.495
12.57
.475
12.07
.310
7.87
.310
7.87
Material
Part
Number
Tin Plated Brass
Tin Plated Brass
505020-2
40626
Tin Plated Brass
62587-1
Brass
Tin Plated Brass
Brass
1217881-1
60654-1
60654-2
64
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Miscellaneous Terminals (Continued)
Wire Strain Relief Clamps
L
Type
2
Wire Range
AWG
mm2
Insul.
Dia.
Stock
Thickness
.025
0.64
B
—
—
.180-.230
4.57-5.84
.150-.200
3.81-5.08
.290-.310
7.37-7.87
.180-.230
4.57-5.84
C
—
—
—
A
1
B
—
—
.028
0.71
.025
0.64
.030
0.76
Miscellaneous Terminals
A
C
Dimensions
W
L
E
.575 .405
14.60 10.29
.500
—
12.70 .250
.640 6.35
16.26
.285 .750
—
7.24 19.05
.345
—
—
8.76
Material
Part
Number
Aluminum
42412-5
Tin Plated Steel
61831-1
Tin Plated Steel
61987-1
Aluminum
61520-11
Phosphor Bronze
1217440-82
Material
Part
Number
Nickel Plated Steel
40800
Material
Part
Number
Tin Plated Brass
1217569-11
Ring .200 [5.08] hole diameter.
Strain relief for .045 [1.14] dia. stranded steel cable.
Spark Plug Receptacle —
.250 [6.35] Dia.
ØW
E
L
A
Type
A
Wire Range
AWG
mm2
—
—
Insul.
Dia.
Stock
Thickness
.275
7.00
.018
0.46
Thermal Protector Crimp Pin
Dimensions
W
L
E
.320 1.155 .745
8.13 29.34 18.92
W
E
L
A
Type
A
1
Wire Range
AWG
mm2
16-14
1.3-2.0
Insul.
Dia.
Stock
Thickness
—
.016
0.41
Dimensions
W
L
E
.050 .375 .175
1.27 9.53 4.45
Pin is crimped in thermal protector wire barrel.
65
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Miscellaneous Terminals (Continued)
Wire Pins
L
L
A
Miscellaneous Terminals
Type
Wire Range
AWG
mm2
B
Insul.
Dia.
Stock
Thickness
Dim.
L
.276
7.00
Part
Number
926823-1
926823-2
926823-31
926823-41
926823-5
926823-6
926823-71
926823-81
926824-1
926824-2
926824-31
926824-41
926824-5
926824-6
926824-71
926824-81
926824-91
1-926824-0
925667-1
925667-2
20-17
0.5–1.0
—
.013
0.32
20-17
0.5–1.0
—
.013
0.32
.276
7.00
17-131⁄ 2
1.0–2.5
—
.013
0.32
.276
7.00
17-131⁄ 2
1.0–2.5
—
.013
0.32
.276
7.00
17-131⁄ 2
1.0–2.5
—
.013
0.32
.276
7.00
22-18
0.30–0.82
.079–.098
2.00–2.50
.013
0.32
.429
10.90
Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Phos. Bronze
Pre-Tin Plated Phos. Bronze
Phos. Bronze
Pre-Tin Plated Phos. Bronze
Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Phos. Bronze
Pre-Tin Plated Phos. Bronze
Phos. Bronze
Pre-Tin Plated Phos. Bronze
Nickel Plated Brass
Nickel Plated Brass
Brass
Pre-Tin Plated Brass
22-18
0.30–0.82
.079–.098
2.00–2.50
.013
0.32
.429
10.90
Nickel Plated Steel
925667-4
22-18
0.30–0.82
.079–.098
2.00–2.50
.013
0.32
.429
10.90
Brass
Pre-Tin Plated Brass
925667-51
925667-61
22-18
0.30–0.82
.079–.098
2.00–2.50
.013
0.32
.429
10.90
Nickel Plated Steel
925667-81
20-17
0.5–1.0
.071–.130
1.80–3.30
.013
0.32
.429
10.90
Brass
Pre-Tin Plated Brass
925552-1
925552-2
20-17
0.5–1.0
.071–.130
1.80–3.30
.013
0.32
.429
10.90
Nickel Plated Steel
925552-4
925552-51
925552-61
925552-81
A
B
1
Material
and Finish
20-17
0.5–1.0
.071–.130
1.80–3.30
.013
0.32
.429
10.90
Brass
Pre-Tin Plated Brass
20-17
0.5–1.0
0.5–1.0
.013
0.32
.013
0.32
.429
10.90
.429
10.90
Nickel Plated Steel
20-17
.071–.130
1.80–3.30
.071–.130
1.80–3.30
20-17
0.5–1.0
.071–.130
1.80–3.30
.013
0.32
.429
10.90
20-151⁄ 2
0.5–1.5
.071–.130
1.80–3.30
—
.630
16.00
Pre-Tin Plated Phos. Bronze
1-925552-0
Tin Plated Brass
Tin Plated Brass
Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
1-925552-1
1-925552-21
926866-1
926866-2
926866-31
926866-41
Splice Free.
66
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Miscellaneous Terminals (Continued)
Wire Pins (Continued)
L
L
B
Wire Range
AWG
mm2
Insul.
Dia.
Stock
Thickness
Dim.
L
Material
and Finish
Brass
Tin Plated Brass
Brass
Silver Plated Brass
Tin Plated Brass
Silver Plated Brass
141093-1
141093-2
160644-1
160644-2
160644-3
160644-41
Nickel Plated Steel
160644-61
20-151⁄ 2
0.5–1.5
.098–.150
2.50–3.80
.013
0.32
.311
7.90
20-151⁄ 2
0.5–1.5
.091–.126
2.30–3.20
.016
0.40
.216
5.50
20-151⁄ 2
0.5–1.5
.091–.126
2.30–3.20
.016
0.40
.216
5.50
Tin Plated Brass
Brass
Nickel Plated Brass
Tin Plated Brass
Brass
Pre-Tin Plated Brass
Phos. Bronze
Pre-Tin Plated Phos. Bronze
160644-71
160644-8
160644-9
1-160644-01
925553-1
925553-2
925553-3
925553-4
20-151⁄ 2
0.5–1.5
.091–.126
2.30–3.20
.016
0.40
.216
5.50
17-131⁄ 2
1.0–2.5
.098–.150
2.50–3.80
.013
0.32
.429
10.90
17-131⁄ 2
1.0–2.5
.098–.150
2.50–3.80
.013
0.32
.429
10.90
17-131⁄ 2
1.0–2.5
.098–.150
2.50–3.80
.013
0.32
.429
10.90
Nickel Plated Steel
925553-6
17-131⁄ 2
1.0–2.5
.098–.150
2.50–3.80
.013
0.32
.429
10.90
17-131⁄ 2
1.0–2.5
.098–.150
2.50–3.80
.013
0.32
.429
10.90
Brass
Pre-Tin Plated Brass
Phos. Bronze
Pre-Tin Plated Phos. Bronze
925553-71
925553-81
925553-91
1-925553-01
17-131⁄ 2
1.0–2.5
.098–.150
2.50–3.80
.013
0.32
.429
10.90
Nickel Plated Steel
1-925553-21
B
Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Brass
Brass
Pre-Tin Plated Phos. Bronze
Phos. Bronze
Pre-Tin Plated Phos. Bronze
Phos. Bronze
926867-1
926867-2
926867-31
926867-41
926933-1
926933-2
926933-3
926933-4
926933-5
926933-6
926933-7
926933-8
.177
4.50 Max..
.013
0.32
.630
16.00
181⁄ 2-17 0.75–1.0
—
.010
0.25
.236
6.00
181⁄ 2-17 0.75–1.0
—
.010
0.25
.236
6.00
181⁄ 2-17 0.75–1.0
—
.010
0.25
.236
6.00
Copper Nickel
926933-9
Pre-Tin Plated Brass
Brass
Phos. Bronze
Pre-Tin Plated Phos. Bronze
925856-1
925856-2
925856-3
925856-4
131⁄ 2-10
2.5–6.0
C
1
Part
Number
151⁄ 2-131⁄ 2 1.5–2.5
—
.010
0.25
.276
7.00
151⁄ 2-131⁄ 2 1.5–2.5
—
.010
0.25
.276
7.00
Miscellaneous Terminals
Type
C
Splice Free.
67
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Miscellaneous Terminals (Continued)
AMPLIVAR Wire Pins with
Insulation Support
L
Miscellaneous Terminals
A
Type
A
1
2
CMA
Wire Range
mm2
Insul.
Dia.
Stock
Thickness
Dim.
L
Material
Part
Number
Brass
Tin Plated Brass
Brass
Tin Plated Brass
Brass
Brass
Tin Plated Brass
Pre-Tin Plated Brass
141075-1
141075-2
141175-11
141175-21
1-141175-12
737060-1
737060-2
737060-3
27-19
0.10-0.60
.055-.087
1.40-2.20
.016
0.40
.272
6.90
27-19
0.10-0.60
.098-.150
2.50-3.80
.016
0.40
.311
7.90
18-13
0.70-2.50
.098-.150
2.50-3.80
.016
0.40
.319
8.10
Reeled “U-up”.
Reeled “U-down”.
68
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Application Tooling (Continued)
AMP-O-LECTRIC Model G
Terminating Machines,
354500-1, -9, -11
A totally new design of
our most popular machine
for bench-top operation.
It features a quiet and
highly-reliable direct motor
drive, electronic controls
for ease of setup and operation, and improved guarding and lighting for operator
convenience and safety. All
versions also include either
manual or automatic precision adjustment for crimp
height. For use with miniature style applicators only.
Specifications
(Shown with optional Crimp
Quality Monitor [CQM].)
For more information, request
Catalog 65828.
Application Tooling
AMP 3K/40 and AMP 5K/40
Terminating Machines
Weight — Approximately 240 lb
[110 kg]
Width — 18.7-25.3 [475-643] depending on type of applicator used
Depth — 21.5-28.1 [546-713] depending on type of applicator used
Height — 20 [508] without reel
Electrical — 120 or 220 VAC,
50 or 60 Hz
Air — 90-110 psi [6.21-7.59 bar] when
required for use with air-feed applicators
Wire Range — 26-10 AWG
[0.12-6.0 mm2] solid or stranded,
depending on product applied
Specifications
Height — 20 [510] (without reel support)
Weight — Approx. 150 lb [68 kg]
Capacity —
AMP 3K/40 — 3,000 lb [1361 kg] max.
crimp force; AMP 5K/40 — 5,000 lb
[2268 kg] max. crimp force
Noise — 76 dBa maximum at 3,000 lb
[1361 kg] full capacity; 80 dBa maximum at 5,000 lb [2268 kg] full capacity
Electrical — 100-240 VAC, 50/60 Hz
(6A) • Average <1 A at 120 VAC when
used as a bench-top unit at 2 000 cycles
per hour operating rate
Air — 90-100 psi [6.21-6.90 bar],
6 scfm [0.00282 m3/s] (when required
for use with air-feed applicators)
Note: Optional Air Feed Valve Assembly
required.
The AMP 3K/40 and
AMP 5K/40 Terminators
are designed for customers
that require the increased
output and quality of a
semiautomatic machine
at a competitive price.
By incorporating the most
commonly requested features as standard and offering a long list of optional
equipment, these terminators offer flexibility to meet
the specific needs of various applications at the lowest possible cost.
■
3,000 lb [1361 kg] max.
crimp force (AMP 3K/40)
5,000 lb [2268 kg] max.
crimp force (AMP 5K/40)
■
Tool-less removal of
applicators and guards
■
Jog capability
■
Quiet, fast operation —
80/76 dBa and cycle time
less than 0.400 seconds
■
Accepts Heavy Duty Mini
style applicators
■
Wide range of optional
equipment such as
tool-less precision crimp
height adjust, batch
counter, CQM capability
and work light
■
Order Catalog 1654856 for
specs and part numbers
69
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Application Tooling (Continued)
Application Tooling
Optional Stripping
Module for the AMP 3K/40,
AMP 5K/40 and
AMP-O-LECTRIC Model G
Terminating Machines
Crimp Quality Monitor (CQM)
aging the wire conductors
during handling or storage.
Wire placement accuracy is
also improved because
once the wire is fed into the
start sensor, the Stripping
Module does the rest.
Noise — Less than 82 dBA (Typical at
operator position with standard mechanical feed applicator)
Weight — 10 lb [4.53 Kilograms]
Height — 5 [127]
Electrical — 100-240 VAC, 50/60 Hz,
single phase current, obtains power from
the terminator
Air — 90-100 psi [620-760 kPa],
6 scfm [2.83 liters/sec]
Wire Sensor — Gold plated contacts
with laser etched target
The combination of the
Stripping Module with
the AMP 3K/40, AMP 5K/40
or the AMP-O-LECTRIC
Model G terminating
machines provides our customers with an economic
and proficient method of
stripping the wire and
crimping terminals on the
same machine. No longer is
a special machine needed
for just stripping the wire.
The wires are stripped
moments before crimping,
which means that there is
virtually no chance of dam-
Wire Range Base Module — 32-14
AWG [0.03 mm2 - 2.5 mm2] (30-32
AWG may require special kit.)
Max. Insulation — .200 [5.08]
Cable Breakout — > 1.1 [29]
Strip Length —
.100 - .400 [2.5 – 10.16]
This unique system provides
100% on-the-fly crimp
inspection. It measures the
crimp height of each termination, and evaluates the
quality of each crimp. If a
crimp is questionable, the
monitor alerts the operator
with both visual and audible
alarms. It also provides ports
for printing and networking.
When used with
AMP-O-LECTRIC Model “G”
Termination Machines, the
monitor is mounted to the
machine. When used with
AMPOMATOR CLS IV Lead
Making Machines, it is integrated into the machine’s
operating system, with the
information displayed on the
machine’s touch screen.
Specifications
This machine is used with
special standard style
applicators to apply splices
and terminals requiring
crimping forces greater
than the maximum output
of AMP-O-LECTRIC
Termination Machines.
Specifications
5-Ton Machine,
Part Number 565433-4
Specifications
The machine is a
modification of a Fixed Bed
Gap mechanical clutch
press manufactured by
Benchmaster Products, Inc.
Carbon Brush Machine,
Part Number 459248-2
This machine is a modified
AMP-O-LECTRIC Model “K”
Termination Machine
equipped with a mechanism that compresses the
spring and pulls the shunt
wire through the spring over
the terminal.
For more information, request
Catalog 1309085.
Width — 8.5 [216]
Depth — 9 [229]
Height — 4.5 [114]
Electrical — 120 VAC, 50 or 60 Hz, or
220 VAC, 50 or 60 Hz
Printer Port — Serial Interface
For more information, request
Catalog 82275.
Width — 29 [737]
Depth — 25.4 [645]
Height — 35.5 [902] without reel
Weight — Approximately 250 lb
[113 kg]
Electrical — 120 VAC, 60 Hz, 6 A
Air — 90-100 psi [6.21-7.59 bar] when
required for use with air-feed applicators
Specifications
Width — 27 [68.6]
Depth — 27 [68.6]
Height — 28 [71.1] without reel
Weight — Approximately 250 lb
[113 kg]
Electrical — 120 VAC, 60 Hz, 6 A
Air — 80-100 psi [5.51-6.89 bar]
The machine can terminate
shunt wires ranging from
.812-4.78 [20.6-121] in
length depending on the
type of terminal used. It can
accept springs with an
inside diameter of .130-.427
[3.30-10.8]
70
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Application Tooling (Continued)
Specifications
Width — 159 [4 040]
Depth — 68 [1 730]
Height — 86 [2 185] with
24 [610] dia. reel
Weight — 2 000 lb [907 kg]
Electrical — 220 VAC, 50 or
60 Hz, single phase, 25 A, with
neutral and ground
Air — 90 psi [6.21 bar], 15 scfm
[0.0071 m3/s] sustained
Wire Range — 26-10 AWG
[0.12-6 mm2] stranded, 26-16 AWG
[0.12-1.4 mm2] solid
Lead Lengths — 3-90 [76.2-2 285],
90-1 000 [2 285-25 400] with long
lead conveyors
Application Tooling
Fully-automatic machines
that measure, cut, strip
and terminate single leads.
Microprocessor-controlled,
and programmed and
operated using an easy-tofollow, menu-driven touchscreen. Features include
direct-drive terminating
units with precision crimp
height adjustment, fully
programmable setups, wire
runout and splice detection,
and motorized pre-feed with
wire straightener. Crimp
Quality Monitoring is also
available.
AMPOMATOR CLS IV+
Lead-Making Machines, 356500-1, -2
For more information, request Catalog
124324.
End- and Side-Feed
Heavy-Duty Miniature
(HDM) Applicators
Applicators
Tyco Electronics applicators
are designed to exacting
specifications to produce
consistent, high-quality
terminations.
HDM applicators are
quickly interchangeable
and easily repaired. They
feature simple dial-in settings for adjusting crimp
height for terminating different wire combinations within
the designated CMA range.
These applicators are used
with both bench machines
and fully-automatic lead
makers. They can also be
used for crimp quality
monitoring on systems
equipped with the CQM
G-Adapter. Call the
Tooling Assistance Hotline
at 1-800-722-1111 for
further information.
Standard Style Applicator
for Large CMA Splice,
Part Number 566372-2
Standard (STD) Applicators
Standard style applicators
are generally used for long
production runs using
dedicated equipment, or
when splicing a coil, for
example, that needs to
be positioned close to
the crimping area in the
applicator. The crimp height
can be adjusted by raising
or lowering the base mount.
This applicator was
designed specifically to
apply AMP 5 000-16 000
CMA Splice, Part Number
63625-1. It features a
highly-visible, close-up
crimp area—less than 1
[25] from the front of the
guard. You can easily
splice multiple wires by
simply rotating them down
through the front of the
guard into the crimp area.
It is an air-feed applicator,
and can be used with
AMP-O-LECTRIC Model K
termination machine Part
Number 1-471273-2 or
1-471273-3.
71
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Part Number Index (Continued)
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
Part Number Index
Part No.
34578
34812
34839
34848
40509
40517
40521
40523
40524
40552
40577
40593
40594
40595
40604
40605
40626
40652
40660
40661
40662
40668
40696
40697
40698
40702
40705
40723
40724
40725
40749
40763
40764
40765
40766
40771
40777
40796
40797
40800
40808
40810
40811
40812
40816
40862
40868
40884
40888
40891
40894
40951
40952
40955
40960
40973
40976
Page
16
16
16
16
28
16
24
17
17
28
24
16
16
16
14
14
64
54
11
11
63
16
17
9
9
16
24
11
11
11
16
22
25
25
25
29
16
17
18
65
22
16
16
16
16
28
28
16
10
24
10
17
28
10
14
14
16
Part No.
40977
40979
40990
41006
41013
41090
41108
41124
41125
41126
41215
41276
41282
41294
41330
41332
41333
41341
41343
41346
41356
41376
41397
41406
41409
41443
41456
41459
41461
41471
41472
41473
41495
41499
41558
41559
41560
41579
41580
41581
41582
41589
41590
41604
41627
41698
41711
41765
41766
41770
41808
41809
41854
41870
41899
41900
41904
41911
41933
41974
41975
41989
Page
17
16
61
16
9
17
30
15
15
15
28
30
30
14
12
12
12
17
22
16
17
19
28
10
19
20
10
28
24
10
10
24
24
16
11
12
12
9
9
9
9
22
22
14
28
56
9
47
47
47
15
15
54
54
47
47
47
17
25
28
28
58
Part No.
41996
42023
42036
42037
42054
42065
42076
42101
42110
42111
42113
42119
42142
42160
42164
42168
42169
42185
42187
42188
42189
42190
42191
42192
42204
42218
42308
42318
42329
42339
42349
42412
42425
42428
42429
42508
42519
42531
42547
42555
42581
42627
42639
42673
42700
42716
42721
42722
42745
42749
42751
42752
42765
42776
42778
42779
42780
42827
42863
42864
42865
42868
Page
28
19
9
9
17
11
47
55
17
17
24
47
57
22
9
23
23
16
25
25
20
20
20
47
16
63
55
24
28
25
61
65
17
53
53
9
59
57
9
17
57
29
14
18
57
17
11
15
55
57
14
14
59
47
47
47
47
54
15
15
56
57
Part No.
42869
42890
42891
42899
42913
42920
42933
42938
42946
42947
60007
60017
60024
60115
60123
60124
60177
60187
60234
60250
60251
60252
60312
60319
60320
60321
60322
60323
60348
60372
60373
60376
60389
60390
60394
60422
60432
60433
60436
60440
60442
60445
60469
60470
60477
60485
60501
60505
60524
60546
60553
60555
60581
60625
60654
60660
60700
60725
60733
60744
60752
60766
Page
54
17
57
15
15
61
11
14
15
15
9
57
12
52
9
22
55
23
25
17
22
58
58
21
21
21
21
21
53
27
53
55
22
22
11
19
58
12
58
54
59
22
53
28
58
14
22
17
58
11
9
9
61
12
64
56
11
22
54
12
21
56
72
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Part Number Index (Continued)
Page
12
12
12
13
22
22
22
56
57
57
29
62
54
53
59
58
54
28
28
28
23
28
55
52
29
63
47
17
63
48
22
61
63
10
15
27
29
9
14
15
13
25
10
56
62
13
57
15
10
20
58
16
58
28
25
19
25
65
62
18
53
10
Part No.
61588
61616
61622
61624
61652
61653
61674
61710
61764
61769
61777
61793
61794
61795
61802
61813
61831
61844
61853
61855
61857
61863
61866
61867
61868
61891
61904
61933
61941
61987
62000
62001
62002
62008
62009
62040
62041
62044
62062
62074
62134
62153
62157
62160
62185
62194
62200
62201
62214
62281
62295
62303
62304
62305
62306
62307
62308
62309
62310
62311
62318
62341
Page
10
58
53
14
9
9
52
21
10
27
13
13
13
13
56
58
65
15
19
23
23
13
15
13
15
56
10
62
58
65
46
46
46
62
62
46
58
48
61
52
61
61
46
54
53
48
46
46
62
64
46
46
46
46
46
46
46
46
46
46
28
48
Part No.
62344
62352
62357
62358
62382
62399
62402
62405
62416
62419
62503
62505
62516
62587
62589
62612
62613
62616
62638
62670
62686
62691
62700
62720
62727
62739
62754
62755
62759
62786
62787
62795
62820
62827
62829
62835
62975
63020
63035
63053
63130
63147
63182
63183
63243
63268
63374
63381
63391
63399
63431
63432
63446
63457
63482
63506
63514
63518
63526
63561
63562
63564
Page
52
58
28
52
29
58
54
54
56
29
29
52
29
64
58
15
15
52
9
48
16
15
13
54
64
56
27
21
27
13
13
23
52
61
56
21
13
62
64
25
27
21
62
62
16
23
22
54
58
21
48
28
21
16
13
55
11
14
24
47
47
47
Part No.
63575
63594
63602
63610
63612
63615
63621
63628
63640
63649
63676
63678
63698
63701
63707
63721
63723
63733
63750
63797
63834
63863
63865
63872
63895
63925
63930
63989
63997
109451
109452
109453
109454
141075
141093
155352
155353
155386
156523
160102
160108
160644
350010
350053
350080
350199
350436
350502
350509
350568
350571
350981
485003
485015
485016
485020
485029
485030
485043
485044
485064
485073
Page
63
54
13
23
21
58
48
12
13
21
16
12
14
61
14
9
64
63
12
9
28
64
57
11
63
56
62
56
13
14
12
9
9
68
67
28
28
61
64
10
10
67
62
52
14
14
13
22
10
23
21
14
9
18
27
28
13
13
27
21
29
23
Part Number Index
Part No.
60770
60771
60772
60772
60773
60774
60775
60793
60798
60799
60806
60812
60884
60885
60891
60900
60908
60932
60933
60997
60998
61008
61012
61013
61021
61039
61074
61142
61165
61166
61238
61263
61280
61283
61289
61299
61300
61312
61336
61352
61359
61385
61386
61388
61390
61397
61412
61424
61436
61443
61454
61463
61489
61492
61498
61505
61519
61520
61524
61546
61547
61556
73
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Machine Applied Terminations, Open Barrel Terminals
(Rings, Spades, Pins, Receptacles, Splices, Tabs)
Part Number Index (Continued)
Part Number Index
Part No.
485079
505020
505033
505034
505038
626034
640007
640008
640009
640011
640012
640051
640052
640082
640102
640189
640204
640212
640216
640249
640253
640257
640260
640271
737060
925552
925553
925667
925856
926823
926824
926866
926867
926933
964156
1217012
1217070
1217074
1217104
1217142
1217160
1217185
1217330
1217384
1217440
1217507
1217510
1217569
1217698
1217881
1217967
1375622
1438246
1438254
1601503
1601504
1601507
Page
21
64
29
63
56
12
14
11
15
14
15
13
13
11
14
19
10
21
15
15
14
18
25
10
68
66
67
66
67
66
66
66
67
67
46
63
57
57
56
56
12
56
14
47
65
62
61
65
62
64
27
29
29
30
38
38
35
Part No.
1601511
1601513
1601514
1601520
1601528
1601529
1601531
1601532
1601538
1601539
1601540
1601542
1601545
1601546
1601547
1601548
1601549
1601550
1601551
1601553
1601555
1601559
1601560
1601562
1601564
1601566
1601569
1601571
1601572
1601573
1601575
1601577
1601578
1601580
1601582
1601583
1601584
1601586
1601587
1601588
1601591
1601593
1601596
1601597
1601599
1601600
1601601
1601603
1601604
1601606
1601607
1601608
1601610
1601611
1601612
1601614
1601617
Page
37
37
35
34
36
36
36
36
42
42
42
38
38
38
38
37
37
34
34
34
38
42
42
38
38
37
37
37
34
34
33
33
33
38
38
38
38
37
35
35
35
33
38
37
37
37
35
35
42
42
41
41
38
38
38
37
37
Part No.
1601618
1601619
1601620
1601623
1601625
1601628
1601629
1601630
1601631
1601632
1601633
1601635
1601637
1601639
1601640
1601642
1601644
1601646
1601647
1601649
1601650
1601651
1601652
1601654
1601655
1601656
1601658
1601660
1601661
1601664
1601665
1601667
1601668
1601669
1601675
1601677
1601678
1601680
1601681
1601682
1601683
1601687
1601689
1601691
1601693
1601694
1601695
1601705
1601706
1601707
1601709
1601710
1601711
1601712
1601716
1601717
1601718
Page
37
37
35
35
35
35
35
35
35
33
33
38
42
41
37
36
42
42
42
38
37
37
37
37
35
35
35
35
35
35
35
35
35
34
42
41
41
36
36
36
42
37
36
36
36
36
36
41
41
41
36
36
36
36
42
41
41
Part No.
1601719
1601721
1601722
1601723
1601726
1601729
1601730
1601731
1601733
1601750
1601754
1601755
1601761
1601764
1601765
1601766
1601768
1601769
1601771
1601793
1601794
1601795
1601797
1601798
1601800
1601807
1601808
1601809
1601810
1601811
1601814
1601818
1601819
1601820
1601823
1601824
1601825
1601827
1601828
1601829
1601832
1601833
1601835
1601837
1601841
1601842
1601844
1601845
1601846
1601847
1601848
1601852
1601853
1601857
Page
41
37
37
37
36
36
36
36
36
41
36
36
41
36
36
36
34
33
33
42
41
38
34
34
42
34
37
37
37
35
41
35
35
35
41
41
38
37
35
35
42
41
41
37
36
41
42
42
41
41
41
36
33
41
74
Catalog 82227
Revised 8-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Global Contacts
Americas
Argentina – Buenos Aires
Phone:
+54-11-4733-2200
Fax:
+54-11-4733-2250
Brasil – São Paulo
Phone:
+55-11-3611-1311
Fax:
+55-11-3611-0397
Canada – Markham
Phone:
+905-475-6222
Fax:
+905-474-5520
Product Information Center:
(Technical Support)
Phone:
+905-470-4425
Fax:
+905-474-5525
Colombia – Bogota
Phone:
+57-1-240-9396
Fax:
+57-1-660-0206
Mexico – Mexico City
Phone:
+52-55-5-729-0425
Fax:
+52-55-5-398-1430
For Latin/South American
Countries not shown
Phone:
+57-1-240-9396
Fax:
+57-1-660-0206
United States – Harrisburg, PA
Phone:
+717-564-0100
Fax:
+717-986-7575
Product Information Center:
(Technical Support)
Phone:
+800-522-6752
Fax:
+717-986-7575
Asia/ Pacific
Australia – Sydney
Phone:
+61-2-9840-8200
Fax:
+61-2-9899-5649
Product Information Center:
(Technical Support)
Phone:
+61-2-9554-2600
Fax:
+61-2-9502-2556
India – Bangalore
Phone:
+91-80-841-0200
Fax:
+91-80-841-0210
Indonesia – Jakarta
Phone:
+6221-526-7852
Fax:
+6221-526-7856
Japan – Kawasaki, Kanagawa
Phone:
+81-44-844-8079
Fax:
+81-44-844-8733
Product Information Center:
(Technical Support)
Phone:
+81-44-844-8013
Fax:
+81-44-812-3200
Raychem Products
Phone:
+81-44-900-5102
Fax:
+81-44-5025-5027
Korea – Seoul
Phone:
+82-2-3274-0535
Fax:
+82-2-3274-0524/0531
Malaysia – Selangor
Phone:
+60-3-7053055
Fax:
+60-3-7053066
New Zealand – Auckland
Phone:
+64-9-634-4580
Fax:
+64-9-634-4586
Philippines – Makati City
Phone:
+632-867-8641
Fax:
+632-867-8661
People’s Republic of China
Hong Kong
Phone:
+852-2735-1628
Fax:
+852-2735-0243
Shanghai
Phone:
Fax:
+86-21-6485-0602
+86-21-6485-0728
Shunde
Phone:
Fax:
+86-765-775-1368
+86-765-775-2823
Singapore – Singapore
Phone:
+65-4820-311
Fax:
+65-4821-012
Raychem Products
Phone:
+65-4866-151
Fax:
+65-6545-514
Taiwan – Taipei
Phone:
+886-2-2664-9977
Fax:
+886-2-2664-9900
Thailand – Bangkok
Phone:
+66-2-955-0500
Fax:
+66-2-955-0505
Vietnam – Ho Chi Minh City
Phone:
+84-8-8232-546/7
Fax:
+84-8-8221-443
Europe/ Middle East/Africa
Austria – Vienna
Phone:
+43-190-560-0
Fax:
+43-190-560-1333
Belgium – Kessel-Lo
Phone:
+32-16-352-300
Fax:
+32-16-352-352
Germany – Bensheim
Phone:
+49-6251-133-0
Fax:
+49-6251-133-1600
Product Information Center:
(Technical Support)
Phone:
+49-6251-133-1999
Fax:
+49-6251-133-1988
Bulgaria – Sofia
Phone:
+359-2-971-2152
Fax:
+359-2-971-2153
Germany – Langen
Phone:
+49-6103-709-0
Fax:
+49-6103-709-1223
Czech Republic – Kurim
Phone:
+420-5-41-162-111
Fax:
+420-5-41-162-223
Germany – Speyer
Phone:
+49-6232-30-0
Fax:
+49-6232-30-2243
Denmark – Viby J
Phone:
+45-70-15-52-00
Fax:
+45-86-29-51-33
Germany
HTS Division – Neunkirchen
Phone:
+49-2247-305-0
Fax:
+49-2247-305-122
Egypt – Cairo
Phone:
+20-2-417-76-47
Fax:
+20-2-419-23-34
Estonia – Tallinn
Phone:
+372-65-05-474
Fax:
+372-65-05-470
Finland – Helsinki
Phone:
+358-95-12-34-20
Fax:
+358-95-12-34-250
France –
Cergy-Pontoise
Phone:
+33-1-3420-8888
Fax:
+33-1-3420-8600
Product Information Center:
(Technical Support)
Phone:
+33-1-3420-8943
Fax:
+33-1-3420-8623
France
Tyco Electronics Export –
St Ouen L’Aumone
Phone:
+33-1-3440-7200
Fax:
+33-1-3440-7220 or
+33-1-3440-7230
82227–10M–LUG–FP–8-04
Printed in the U.S.A.
Great Britain –
Stanmore Middlesex
Phone:
+44-181-954-2356
Fax:
+44-181-954-6234
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone:
+44-141 810 8967…69
Fax:
+44-141 810 8971
Great Britain – Dorcan, Swindon
Raychem Products
Phone:
+44-1793-528171
Fax:
+44-1793-572516
Italy – Collegno (Torino)
Phone:
+39-011-4012-111
Fax:
+39-011-4031-116
Lithuania – Vilnius
Phone:
+370-5-21-31-402
Fax:
+370-5-21-31-403
Netherlands – ’s-Hertogenbosch
Phone:
+31-73-6246-246
Fax:
+31-73-6212-365
Product Information Center:
(Technical Support)
Phone:
+31-73-6246-999
Fax:
+31-73-6246-998
Norway – Nesbru
Phone:
+47-66-77-88-99
Fax:
+47-66-77-88-55
Poland – Warsaw
Phone:
+48-22-45-76-700
Fax:
+48-22-45-76-720
Romania – Bucharest
Phone:
+40-1-311-3479+3596
Fax:
+40-1-312-0574
Sweden – Upplands Väsby
Phone:
+46-8-50-72-50-00
Fax:
+46-8-50-72-50-01
Switzerland – Steinach
Phone:
+41-71-447-0447
Fax:
+41-71-447-0444
Turkey – Istanbul
Phone:
+90-212-281-8181…3
+90-212-282-5130/5430
Fax:
+90-212-281-8184
Ukraine – Kiev
Phone:
+38-044-238-6908
Fax:
+38-044-568-5740
Russia – Moscow
Phone:
+7-095-926-55-06…09
Fax:
+7-095-926-55-05
Russia – St. Petersburg
Phone:
+7-812-325-30-83
Fax:
+7-812-325-32-88
Greece – Athens
Phone:
+30-1-9370-396/397
Fax:
+30-1-9370-655
Scotland – Dundee
Madison Cable Products
Phone:
+44-1382-508080
Fax:
+44-1382-505060
Hungary – Budapest
Phone:
+36-1-289-1000
Fax:
+36-1-289-1010
Slovakia – Banská Bystrica
Phone:
+421-48-415-20-11/12
Fax:
+421-48-415-20-13
Ireland – Dublin
Phone:
+353-1-820-3000
Fax:
+353-1-820-9790
Slovenia – Ljubljana
Phone:
+386-1561-3270
Fax:
+386-1561-3240
Israel – Yokneam
Phone:
+972-4-959-0508
Fax:
+972-4-959-0506
Spain – Barcelona
Phone:
+34-93-291-0330
Fax:
+34-93-201-7879
Product Information Center:
(Technical Support):
Phone:
+34-93-291-0330
Fax:
+34-93-200-3779
South Africa – Port Elizabeth
Phone:
+27-41-405-4500
Fax:
+27-41-486-1314
Tyco Electronics Corporation
www.tycoelectronics.com
TYCO ELECTRONICS CORPORATION