MCC
TM
Micro Commercial Components
1F1
THRU
1F7
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
Features
•
•
•
•
•
•
Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates
RoHS Compliant. See ordering information)
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
Marking : Cathode band and type number
Fast Switching for High Efficiency and Low Leakage
Halogen free available upon request by adding suffix "-HF"
Maximum Ratings
•
•
•
•
1.0 Amp Fast
Recovery Plastic
Rectifier
50 to 1000 Volts
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
For capacitive load. Derate current by 20%
Typical Thermal Resistance: 67oC/W Junction to Ambient.
MCC
Part Number
1F1
1F2
1F3
1F4
1F5
1F6
1F7
Maximum
Recurrent
Peak Reverse
Voltage
50V
100V
200V
400V
600V
800V
1000V
Maximum
RMS
Voltage
35V
70V
140V
280V
420V
560V
700V
R-1
Maximum DC
Blocking
Voltage
D
50V
100V
200V
400V
600V
800V
1000V
A
Cathode Mark
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current
Peak Forward Surge
Current
Maximum
Instantaneous
Forward Voltage
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
Typical Junction
Capacitance
Maximum Reverse
Recovery Time
1F1-1F4
1F5
1F6-1F7
IF(AV)
1.0 A
IFSM
30A
8.3ms, half sine
VF
1.3V
IFM = 1.0A;
TC = 25°C
IR
5.0µA
500uA
TC = 25°C
TC = 100°C
12pF
Measured at
1.0MHz, VR=4.0V
B
TC = 55°C
D
C
DIMENSIONS
CJ
trr
150ns
250ns
500ns
IF=0.5A,
IR=1A,
Irr=0.25A
INCHES
MM
DIM
NOTE
MIN
MAX
MIN
MAX
A
0.116
0.140
2.90
3.50
B
0.091
0.102
2.30
2.60
C
0.020
0.024
0.50
0.60
D
0.787
-----
20.00
-----
Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7.
Revision: B
www.mccsemi.com
1 of 3
2013/01/01
MCC
1F1 thru 1F7
FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
1.0
PEAK FORWARD SURGE
CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
FIG. 1 - TYPICAL FORWARD CURRENT
DERATING CURVE
.8
.6
.4
Single Phase
Half Wave 60Hz
Resistive or
Inductive Load
.2
200
8.3ms Single Half Sine-Wave
(JEDED Method)
100
50
30
20
10
0
0
25
50
75 100 125 150
AMBIENT TEMPERATURE, ( )
175
1
10
TJ = 25
1.0
0.3
0.1
Pulse Width=300uS
1% Duty Cycle
.03
.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
TJ = 50
.6
.4
.2
.1
TJ = 25
.06
.04
.02
.01
20
40
60
80
100
120
140
FIG. 6 - TEST CIRCUIT DIAGRAM AND REVERSE
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, (pF)
2
1.0
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
RECOVERY TIME CHARACTERISTIC
200
50
NONINDUCTIVE
100
60
40
(+)
25 Vdc
(approx)
(-)
20
10
6
4
TJ = 25
10
NONINDUCTIVE
trr
+0.5A
(-)
D.U.T
0
PULSE
GENERATOR
-0.25A
(NOTE 2)
1
NONINDUCTIVE
OSCILLOSCOPE
(NOTE 1)
(+)
-1.0A
NOTES:1 Rise Time = 7ns max. Input Impedance =
1 megohm. 22pF.
2. Rise Time = 10ns max. Souce Impedance =
50 ohms.
2
Revision: B
100
10
6
4
0
INSTANTANEOUS FORWARD VOLTAGE, (V)
1
.1
5
10
50
NUMBER OF CYCLES AT 60Hz
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
20
INSTANTANEOUS REVERSE CURRENT, (uA)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
3.0
TM
Micro Commercial Components
.2
.4
1cm
SET TIME BASE FOR
50/100 ns/cm
1.0 2 4
10 20 40 100
REVERSE VOLTAGE, ( V )
www.mccsemi.com
2 of 3
2013/01/01
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 5Kpcs/Reel
Part Number-AP
Ammo Packing: 3Kpcs/Ammo Box
Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: B
3 of 3
2013/01/01