MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# 2N7002W Features • • • • • • • • • • • • Low ON-Resistance Low Input Capacitance Low Gate Threshold Voltage Fast Switching Speed Low Input/Output Leakage Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 N-Channel Enhancement Mode Field Effect Transistor SOT-323 Mechanical Data A D Halogen free available upon request by adding suffix "-HF" Case: SOT-323, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Terminal Connections: See Diagram Marking: K72 D B G F C S E Maximum Ratings • • • Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Maximum Thermal Resistance; 625K/W Junction To Ambient H G J K DIMENSIONS Parameter Symbol Value Unit VDSS 60 V RGS1.0MΩ VDGR 60 V Continuous Pulsed VGSS ±20 ±40 V ID 115 73 800 Drain-Source-Voltage Drain-Gate Voltage Gate-Source-Voltage Drain Current (Note 1) Continuous Continuous @ 100 Pulsed DIM A B C D E F G H J K INCHES MIN MAX .071 .087 .045 .053 .079 .087 .026 Nominal .047 .055 .012 .016 .000 .004 .035 .039 .004 .010 .012 .016 NOTE Suggested Solder Pad Layout r mA MM MIN MAX 1.80 2.20 1.15 1.35 2.00 2.20 0.65Nominal 1.20 1.40 .30 .40 .000 .100 .90 1.00 .100 .250 .30 .40 0.70 0.90 1.90 Total Power Dissipation (Note 1) Derating above TA = 25 PD 200 1.60 mW mW/ 0.65 Note: 1. Valid provided that terminals are kept at specified ambient temperature. 2. Pulse width 300µs, duty cycle 2% 0.65 www.mccsemi.com Revision: B 1of 4 2013/01/01 MCC 2N7002W TM Micro Commercial Components Electrical Characteristics @ TA = 25 C unless otherwise specified Characteristic Symbol Min Typ BVDSS 60 70 Max Unit Test Condition OFF CHARACTERISTICS (Note 2) Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current @ TC = 25°C @ TC = 125°C Gate-Body Leakage V VGS = 0V, ID = 10 A IDSS 1.0 500 µA VDS = 60V, VGS = 0V IGSS ±10 nA VGS = ±20V, VDS = 0V 2.0 V VDS = VGS, ID =-250 A 7.5 13.5 VGS = 5.0V, ID = 0.05A VGS = 10V, ID = 0.5A A VGS = 10V, VDS = 7.5V ON CHARACTERISTICS (Note 2) VGS(th) Gate Threshold Voltage Static Drain-Source On-Resistance On-State Drain Current Forward Transconductance @ Tj = 25°C @ Tj = 125°C 1.0 3.2 4.4 RDS (ON) ID(ON) 0.5 gFS 80 1.0 mS VDS =10V, ID = 0.2A DYNAMIC CHARACTERISTICS Input Capacitance Ciss 22 50 pF Output Capacitance Coss 11 25 pF Reverse Transfer Capacitance Crss 2.0 5.0 pF Turn-On Delay Time tD(ON) 7.0 20 ns Turn-Off Delay Time tD(OFF) 11 20 ns VDS = 25V, VGS = 0V f = 1.0MHz SWITCHING CHARACTERISTICS VDD = 30V, ID = 0.2A, RL = 150 , VGEN = 10V, RGEN = 25 Note: 1. Valid provided that terminals are kept at specified ambient temperature. 2. Pulse width 300s, duty cycle 2%. www.mccsemi.com Revision: B 2 of 4 2013/01/01 MCC 2N7002W TM Micro Commercial Components 1.0 0.6 Tj = 25C RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 0.8 ID, DRAIN-SOURCE CURRENT (A) 7 VGS = 10V 9.0V 8.0V 7.0V 6.5V 6.0V 5.0V 4.5V 4.0V 3.5V 3.0V 2.5V 2.0/1.0V 5.5V 5.0V 0.4 0.2 6 5 VGS = 5.0V 4 3 VGS = 10V 2 1 0 0 0 1 0 3 2 0.4 0.6 0.8 1.0 ID, DRAIN CURRENT (A) Fig. 2 On-Resistance vs Drain Current VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 1 On-Region Characteristics 6 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2.0 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 0.2 5 4 1.5 VGS = 10V, ID = 0.5A VGS = 5.0V, ID = 0.05A 1.0 0.5 0 5 4 ID = 500mA ID = 50mA 3 2 1 0 -55 -30 -5 20 45 70 95 120 145 0 Tj, JUNCTION TEMPERATURE (C) Fig. 3 On-Resistance vs Junction Temperature 2 4 6 8 10 12 14 16 18 VGS, GATE TO SOURCE VOLTAGE (V) Fig. 4 On-Resistance vs. Gate-Source Voltage www.mccsemi.com Revision: B 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 3Kpcs/Reel Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2013/01/01