Switched Socket Specifications: Descriptions Connector Type 9098 9798 Twin UK Mains Pin Format UK Mains UK Mains Colour White Supply Voltage 250V AC Voltage Rating 250V AC Current Rating 13A Length 145mm 80mm External Length/Height 85mm External Width 50mm Fixing Centres 120mm Fixing Hole Diameter Number of Earth Contacts Number of Outputs Approval Category 9399 60mm 4 1 2 1 2 1 BS1363 Part Number Table Description Part number Socket Switched, 2 Gang, SP 9098 Socket Switched, 2 Gang, 2 Pole 9798 Socket Switched, 1 Gang, SP 9399 Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. pro - ELEC is the registered trademark of the Group. © Premier Farnell plc 2012. www.farnell.com www.cpc.co.uk Page <1> 29/10/12 V1.0