2M6.8Z - 2M200Z creat by art 2.0 Watts Glass Passivated Junction Silicon Zener Diodes DO-15 Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Typical IR less than 1uA High temperature soldering guaranteed: 260℃ / 10 seconds/ .375", (9.5mm) lead length Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Case: DO-15 Terminals: Pure tin plated, lead free, solderable per MIL-STD-750, method 2026 Polarity: Indicated by cathode band Weight: 0.4 grams Ordering Information (example) Part No. Package Packing INNER TAPE Packing code Packing code (Green) 2M6.8Z DO-15 1.5K / AMMO box 52mm A0 A0G Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol Value Units Steady State Power Dissipation at TL=75℃ Lead Lengths .375", 9.55mm (Note 1) PD 2.0 Watts Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2) IFSM 15 Amps TJ, TSTG -55 to +175 ℃ Operating and Storage Temperature Range Note 1: Mount on Cu-Pad size 10mm x 10mm x 1.6mm on PCB Note 2: Measured on 8.3ms Single half Sine-Wave of equivalent square wave, duty cycle= 4 pulse per minute maximum Version:I13 ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) Device (Notes 1) 2M6.8Z 2M11Z 2M12Z 2M13Z 2M14Z 2M15Z 2M16Z 2M17Z 2M18Z 2M19Z 2M20Z 2M22Z 2M24Z 2M27Z 2M30Z 2M33Z 2M36Z 2M39Z 2M43Z 2M47Z 2M51Z 2M56Z 2M62Z 2M68Z 2M75Z 2M82Z 2M91Z 2M100Z 2M110Z 2M120Z 2M130Z 2M140Z 2M150Z 2M160Z 2M170Z 2M180Z 2M190Z 2M200Z Nominal Zener Voltage (Notes 2) Test Current VZ @ IZT IZT ZZT @ IZT ZZK @ IZK IZK V 6.8 11 12 13 14 15 16 17 18 19 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 140 150 160 170 180 190 200 mA 100 45.5 41.5 38.5 35.7 33.4 31.2 29.4 27.8 26.3 25.0 22.8 20.8 18.5 16.6 15.1 13.9 12.8 11.6 10.6 9.8 9.0 8.1 7.4 6.7 6.1 5.5 5.0 4.5 4.2 3.8 3.6 3.3 3.1 2.9 2.8 2.6 2.5 Ω 1.5 4.0 4.5 5.0 5.5 7.0 8.0 9.0 10 11 11 12 13 18 20 23 25 30 35 40 48 55 60 75 90 100 125 175 250 325 400 500 575 650 675 725 825 900 Ω 200 700 700 700 700 700 700 750 750 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 4000 4500 5000 5500 6000 6500 7000 7000 8000 8000 mA 1.00 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 Maximum Zener Impedance (Notes 3) Maximum Zener Current IZM Leakage Current IR @ VR uA 1000 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 V 5.5 8.4 9.1 9.9 10.6 11.4 12.2 13.0 13.7 14.4 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 62.2 69.2 76.0 83.6 91.2 98.8 106.4 114.0 121.6 130.4 136.8 144.8 152.0 mA 246 166 152 138 130 122 114 107 100 95 90 82 76 68 60 55 50 47 43 39 36 32 29 27 24 22 20 18 17 15 14 13 12 11 11 10 10 9 Notes: 1. TOLERANCES - Standard Voltage tolerance = ±5%, tolerances may be considered as a special device 2. ZENER VOLTAGE(VZ) MEASUREMENT - Zener voltage guaranteed when measured at 0.375"(9.5mm) from the body under 40ms ±10ms current pulse and ambient temperature of 25℃ 3. ZENER IMPEDANCE (ZZ) DERIVATION - The zener impedance is derived from 60 cycles AC voltage, which results when an current having an rms value eqal to 10% of the DC zener current (IZT or IZK) is superimposed on IZT or IZK 4. MAXIMUM ZENER CURRENT (IZM) NON-REPETITIVE - The rating listed in the electrical characteristics table is maximum peak non - repetitive reverse surge current of 1/2 sine wave of 1/120 second duration or equivalent square wave, superimposed on the test current IZT, per JEDEC standard. Version:I13 RATINGS AND CHARACTERISTIC CURVES (2M6.8Z THRU 2M200Z) FIG. 1- TYPICAL THERMAL RESPONSE ΘJL(t,D)TRANSIENT THERMAL RESISTANCE JUNCTION-TO-LEAD(℃/W) 100 D=0.5 D=0.2 D=0.05 D=0.1 10 PPK t1 1 t2 D=0.02 D=0 D=0.01 NOTE BELOW 0.1 SECOND, THERMAL RESPONSE CURVE IS APPLICABLE TO ANY LEAD LENGTH(L) SINGLE PULSE △TJL=ΘJL(1)PPK 0.1 0.01 0.1 1 10 100 1000 PW, PULSE WIDTH, (mS) FIG. 3- TYPICAL REVERSE LEAKAGE FIG. 2- MAXIMUM SURGE POWER RECTANGULAR NONREPETITIVE WAVEFORM TA=25℃ PRIOR TO INITIAL PULSE IR, REVERSE LEAKAGE (uAdc) @VR AS SPECIFIED IN ELEC.CHAR, TABLE A Ppk, PEAKSURGE POWER(WATTS) 1000 100 10 0.1 1 10 100 1 0.1 0.01 0.001 RANGE 0.0001 1 PW, PULSE WIDTH (ms) 10 FIG.4- UNIT 6.8 TO 12 VOLTS FIG.5 UNIT 13 TO 200 VOLTS 6 Vz, TEMPERATURE COEFFICIENT (mC/℃) @Izt Vz, TEMPERATURE COEFFICIENT (mC/℃) @Izt 7 5 4 3 2 RANGE 0 -1 VZ @ IZT -2 -3 -4 -5 3 4 5 6 7 8 9 1000 NORMAL Vz (VOLTS) 8 1 100 10 Vz, ZENER VOLTAGE @IZT (VOLTS) 11 12 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 VZ @ IZT RANGE 0 20 40 60 80 100 120 140 160 Vz, ZENER VOLTAGE @IZT (VOLTS) Version:I13 180 200 RATINGS AND CHARACTERISTIC CURVES (2M6.8Z THRU 2M200Z) FIG. 7- Vz = 11 THRU 91 VOLTS FIG. 6- Vz = 6.8 THRU 10 VOLTS 100 IZ, ZENER CURRENT (mA) IZ, ZENER CURRENT (mA) 100 10 1 10 1 0.1 0.1 0 1 2 3 4 5 6 7 8 9 0 10 10 20 30 40 50 60 70 80 90 100 Vz, ZENER VOLTAGE (VOLTS) Vz, ZENER VOLTAGE (VOLTS) FIG. 8- Vz = 100 THRU 200 VOLTS FIG. 9- TYPICAL THERMAL RESISTANCE 80 100 JL, JUNCTION-LEAD THERMAL RESISTANCE(℃/W) IZ, ZENER CURRENT (mA) 70 10 1 0.1 100 120 140 160 Vz, ZENER VOLTAGE (VOLTS) 180 200 60 50 40 30 20 10 0 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 L, LEAD LENGTH TO HEAT SINK (INCH) Version:I13 1 Ordering information Part No. 2MxxZ (Note) Package Packing INNER TAPE Packing code Packing code (Green) DO-15 1.5K / AMMO box 52mm A0 A0G DO-15 3.5K / 13" Reel 52mm R0 R0G DO-15 1K / Bulk packing B0 B0G Note: "xx" is Device Code from "6.8" thru "200". AXIAL LEAD TAPING SPECIFICATIONS Outline DO-15 A ±0.5 5 B ±1.5 52.4 Z MAX 1.2 T ±0.4 6 E ∣L1-L2∣ MAX MAX 0.8 1 D 330 Suggested Mounting Hole Rule Symbol A B C D Unit(mm) 6.4 0.8 3.0 1.2 D1 ±0.3 85.7 D0 ±0.4 16.6 Unit (mm) W ±1.0 76 Dimensions Unit(mm) DIM. Marking Diagram P/N = Specific Device Code G = Green Compound YWW = Date Code Unit(inch) Min Max Min Max A 2.60 3.60 0.102 0.142 B 0.70 0.90 0.028 0.035 C 25.40 - 1.000 - D 5.80 7.60 0.228 0.299 E 25.40 - 1.000 -