UNISONIC TECHNOLOGIES CO., LTD 78TXX LINEAR INTEGRATED CIRCUIT 3-TERMINALS 0.5A POSITIVE VOLTAGE REGULATOR DESCRIPTION The UTC 78TXX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that required supply current up to 0.5 A. FEATURE * Output current up to 0.5 A * Fixed output voltage of 4.7V, 5V, 6V, 8V, 9V, 12V, 15V,18V and 24V available * Thermal overload shutdown protection * Short circuit current limiting * Output transistor SOA protection *Pb-free plating product number:78TXXL ORDERING INFORMATION Ordering Number Pin Assignment Normal Lead Free Plating 1 2 3 78Txx-TQ2-R 78TxxL-TQ2-R I G O 78Txx-TQ2-T 78TxxL-TQ2-T I G O 78Txx-TQ3-R 78TxxL-TQ3-R I G O 78Txx-TQ3-T 78TxxL-TQ3-T I G O Note: 1. xx: output voltage, refer to Marking Information 2. Pin Code: I: Input G: GND O: Output www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd Package Packing TO-263 TO-263 TO-263-3 TO-263-3 Tape Reel Tube Tape Reel Tube 1 of 7 QW-R101-021,B 78TXX LINEAR INTEGRATED CIRCUIT MARKING INFORMATION PACKAGE TO-263 TO-263-3 VOLTAGE CODE 47 : 4.7V 05 : 5V 06 : 6V 08 : 8V 09 : 9V 12 : 12V 15 : 15V 18 : 18V 24 : 24V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MARKING 2 of 7 QW-R101-021,B 78TXX LINEAR INTEGRATED CIRCUIT BLOCK DIAGRAM INPUT 1 R13 R17 T10 Z2 R9 T8 T12 T14 T9 R14 R19 R18 R12 T13 T11 R11 T5 R10 OUTPUT 3 T6 R8 R15 R5 T4 Z1 T15 R4 R6 T7 R1 R16 R2 R7 C1 T3 T1 T2 GND R3 2 TYPICAL APPLICATION CIRCUIT VIN 1 UTC78TXX CI 0.33 μF 2 3 VoUT CO 0.1 μF Note:Bypass capacitors are recommended for optimum stability and transient response and should be located as close as possible to the regulators. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 7 QW-R101-021,B 78TXX LINEAR INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS (Operating temperature range applies unless otherwise specified. ) PARAMETER SYMBOL RATINGS UNIT 35 V Input Voltage VIN 40 V Output Current IOUT 0.5 A Power Dissipation PD Internally Limited W Operating Junction Temperature TJ 0~+125 °C Storage Temperature TSTG -65 ~ +150 °C Note:1. Absolute maximum ratings are stress ratings only and functional device operation is not implied. The device could be damaged beyond Absolute maximum ratings. 2. The maximum steady state usable output current are dependent on input voltage, heat sinking, lead length of the package and copper pattern of PCB. The data are showed as electrical characteristics table represents pulse test conditions with junction temperatures specified at the initiation of test. VOUT=4.7~18V VOUT=20~24V ELECTRICAL CHARACTERISTICS (TJ=25°C,CI =0.33uF,CO =0.1uF,PD≦7W,unless otherwise specified) For 78T47 (VIN=9.7V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage SYMBOL TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN =7.2~19.7V, IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN=7.2~19.7V ΔVOUT VIN=7.2~19.7V, IOUT=0.5A IQ IOUT=0.5A VIN=7.2~19.7V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN=7.7~17.7V, f=120Hz IPEAK ISC VIN=35V VD MIN 4.512 4.465 SYMBOL MIN 4.8 4.75 62 TYP 4.7 40 -0.6 80 1.8 250 2 MAX UNIT 4.888 V 4.935 V 47 mV 24 mV 47 mV 47 mV 8 mA 1 mA 0.5 mA μV mV/°C dB A mA V For 78T05 (VIN=10V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN =7.5~20V,IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200 mA VIN =7V~25V ΔVOUT VIN =7.5~20V, IOUT=0.5A IQ IOUT=0.5A VUT =7.5~20V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN =8~18V,f=120Hz IPEAK ISC VIN=35V VD UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 62 TYP 5 40 -0.6 80 1.2 250 2 MAX 5.2 5.25 100 50 100 50 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V 4 of 7 QW-R101-021,B 78TXX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For 78T06 (VIN=11V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage SYMBOL TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN=8.5~21V,IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN=8~25V ΔVOUT VIN=8.5~21V, IOUT=0.5A IQ IOUT=0.5A VIN =8.5~21V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN =9~19V,f=120Hz IPEAK ISC VIN=35V VD MIN 5.76 5.7 SYMBOL TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN=10.5~23V, IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN =10.5~25V ΔVOUT VIN =10.5~23V, IOUT=0.5A IQ IOUT=0.5A VIN =10.5~23V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN =11.5~21.5V, f=120Hz IPEAK ISC VIN=35V VD MIN 7.68 7.6 SYMBOL MIN 8.64 8.55 59 TYP 6 MAX 6.24 6.3 60 30 60 60 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V MAX 8.32 8.4 80 40 80 80 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V 45 -0.7 75 1.2 250 2 For 78T08 (VIN=14V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage 56 TYP 8 58 -0.9 72 1.2 250 2 For 78T09 (VIN=15V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN =11.5~24V,IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN =11.5~25V ΔVOUT VIN =11.5~24V, IOUT=0.5A IQ IOUT=0.5A VIN=11.5~24V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN=12.5~22.5V,f=120Hz IPEAK ISC VIN=35V VD UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 56 TYP 9 58 -1.1 72 1.2 250 2 MAX 9.36 9.45 90 45 90 90 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V 5 of 7 QW-R101-021,B 78TXX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For 78T12 (VIN=19V, , IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage SYMBOL TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN =14.5~27V,IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN=14.5~30V ΔVOUT VIN=14.6~27V, IOUT=0.5A IQ IOUT=0.5A VIN =14.5~30V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN =15~25V, f=120Hz IPEAK ISC VIN=35V VD MIN 11.52 11.4 SYMBOL TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN =17.5~30V, IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN=18.5~30V ΔVOUT VIN=17.5~30V, IOUT=0.5A IQ IOUT=0.5A VIN=17.5~30V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN=18.5~28.5V, f=120Hz IPEAK ISC VIN=35V VD MIN 14.4 14.25 SYMBOL MIN 17.28 17.1 55 TYP 12 MAX 12.48 12.6 120 60 120 120 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V MAX 15.6 15.75 150 75 150 150 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V MAX 18.72 18.9 180 90 180 180 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V 75 -1.5 72 1.2 250 2 For 78T15 (VIN=23V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage 54 TYP 15 90 -1.8 70 1.2 250 2 For 78T18 (VIN=27V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN=21~33V,IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN=21~33V ΔVOUT VIN=21~33V, IOUT =0.5A IQ IOUT=0.5A VIN=21.5~33V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN =22~32V,f=120Hz IPEAK ISC VIN=35V VD UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 53 TYP 18 110 -2.2 69 1.2 250 2 6 of 7 QW-R101-021,B 78TXX LINEAR INTEGRATED CIRCUIT ELECTRICAL CHARACTERISTICS(Cont.) For 78T24 (VIN=33V, IOUT=0.5A) PARAMETER Output Voltage Load Regulation Line Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Temperature coefficient of VOUT Ripple Rejection Peak Output Current Short-Circuit Current Dropout Voltage SYMBOL TEST CONDITIONS IOUT=5mA~0.5A VOUT VIN=27~38V, IOUT=5mA~0.5A IOUT=5mA~0.5A ΔVOUT IOUT=5mA~200mA VIN=27~38V ΔVOUT VIN=27~38V, IOUT=0.5A IQ IOUT=0.5A VIN=28~38V ΔIQ IOUT=5mA~0.5A 10Hz≦f≦100kHz eN ΔVOUT/ΔT IOUT=5mA RR VIN =28~38V, f=120Hz IPEAK ISC VIN=35V VD MIN 23.04 22.8 50 TYP 24 170 -2.8 66 1.2 250 2 MAX 24.96 25.2 240 120 240 240 8 1 0.5 UNIT V V mV mV mV mV mA mA mA uV mV/°C dB A mA V UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 7 QW-R101-021,B