WEIDMULLER 1398460000

SAK-series
124
SAK-series
Weidmüller terminal - SAK-series- are proved in millions of applications for more
than 50 years.
TS 32
TS 35
Thermosetting plastic or
Thermoplastic
Terminal of thermosetting plastic are normally used in applications where high continuous service temperature and high
flammability level are necessary. The
Weidmüller thermosetting plastic KRG is
very resistant against infection through
mould and micro-organisms.
The thermoplastic material Polyamide 66
has very good electrical and mechanical
properties upto 100 °C. PA66 is flexible
and unsusceptible to fracture, even with
low temperatures.
Polyamid 66 has improved fire resistance
and is self-extinguishing with flammability
level V2 according to UL 94.
Cross-connection systems
SAK portfolio
40% of all terminals are cross-connected
for potential branching.
•
•
•
•
•
Weidmüller distinguishes between the following cross-connection units for SAKseries:
• type Q pre-assembled cross-connections
• type QL permanent cross-connections
• type VL removeable cross-connection
straps
• type QS removeable cross-connection
plugs
An extensive assortment of accessories is
available for Weidmüller SAK terminals:
The following approvals apply to SAK terminals:
Thermosetting
plastic
Accessories
Cross-connection systems from the SAK
and AKZ series, type Q, QL or VL or other
freely accessible live components, must be
protected with appropriate covers ADP 1
or 4 or TSK 31.5 as long as they are to be
inserted safe from contact.
Approvals
Thermoplastic
Feed-through terminals
Protective conductor terminals
Fuse terminals
Disconnect-test terminals
Feed-through terminals with tab, solder,
WireWrap and Termi Point connections
• Initiator terminals, Actuator terminals
• Stud terminals
a
r
#
q
i
LR
u
DNV
UL-USA
CSA-Canada
GOST-Russia
SEV-Switzerland
KEMA-Netherlands
Lloyds Register of Shipping
Germanischer Lloyd
Det Norske Veritas
•
•
•
•
•
•
•
•
Partitions
Cover plates
Small partitions
Test plugs
Test adapters
Marking material
Cross-connections and
Covers
Positioning of end plates or partitions between cross-connections
Operating voltage
Terminal width (in mm)
36
38
10
125 V ~
AP
–
–
250 V ~
AP
–
–
380 V ~
AP
AP
–
440 V ~
TW
AP
AP
500 V ~
TW
TW
AP
660 V ~
TW
TW
TW
750 V ~
TW
TW
TW
In PA terminals small partitions (TSch) have to be used up to 380 V.
12
18
22
–
–
–
AP
AP
TW
TW
–
–
–
AP
AP
TW
TW
–
–
–
–
–
AP
AP
125
SAK-series
Available for the two rail systems TS32
and TS35, the SAK terminals are useable
for every application and for all cross-sections. SAK terminals fulfill the requirements
of EN 60 947-7-1.
Feed-through terminals
SAKD 2.5 N
SAKD 2.5/10/35
SAK 2.5/35
SAK 2.5/10/35
Y
SAK 2.5
SAK 2.5/10
SAK 4/35
SAK 4/10/35
Y
W
W
W
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal block with marking PA
Terminal block without marking PA
End plate (thickness mm)
a r # LR u
5/32.5/43.5
5/44/38
10/M 2.5/3.5 x 0.6
6/45/40
10/M 2.5/3.5 x 0.6
10/M 2.5/3.5 x 0.6
ari#
6.5/40/51.5
6.5/45/44
12/M 3/3.5 x 0.6
500 V/24 A/2.5 mm2
6 kV/3
800 V/24 A/2.5 mm2
8 kV/3
800 V/24 A/2.5 mm2 3)
8 kV/3
800 V/32 A/4 mm2
8 kV/3
0.4…0.6
1
0.4…0.6
1
0.4…0.6
1
0.5…1.0
2
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A2
30 A/4 mm2
0.5…6
0.5…2.5
0.5…4
0.5…2.5/43)
A3
32 A/4 mm2
0.5…6
0.5…2.5
0.5…4
0.5…2.5/43)
A3
32 A/4 mm2
0.5…6
0.5…4
0.5…4
0.5…4
A4
41 A/6 mm2
24
24
32
32
36
300 V/20 A/28…12 AWG
300 V/20 A/22…12 AWG
Y
Qty. W
Qty.
600 V/20 A/22…12 AWG
600 V/25 A/26…10 AWG
W
Cat. No.
Qty.
0380420000 100
0380470000 100
600 V/20 A/22…12 AWG
600 V/36 A/26…10 AWG
W
Cat. No.
Qty.
0443620000 100
0443670000 100
0215560000100 0268860000 100
03804600001)100
03804800001)100
600 V/20 A/22…12 AWG
600 V/25 A/26…10 AWG
Y
Cat. No.
Qty.
0279620000 100
0279670000 100
0279630000 100
02796600001)2)100
02796800001)2)100
13263600001)2)100
03225600001)2) 10
03228600001)2) 10
Type
Cat. No.
Qty.
AP (1.5) 0279520000
20
AP (1.5) 0279570000
20
AP (1.5) 0279530000
20
0215580000100 0268880000100
0401060000 10 0523160000 10
0401160000 10
Type
KrG
Blue KrG
KrS
PA
Blue PA
PA
Blue PA
Partition (thickness mm)
TW
WTW
KrG
Blue KrG
KrS
PA
Blue PA
HP
a r i # LR u
AP (1.5)
AP (1.5)
Cat. No.
0150960000
0150980000
Qty.
20
20
TW (1.5)
TW (1.5)
TW (1.5)
0191860000
0191880000
0307500000
20
20
20
TSch 3
0366860000
100
Q
Q
Q
Q
0367800000
0367900000
0368000000
0368100000
50
50
50
20
Small partition
TSch 1
Cross-connection
Q4
2-pole
3-pole
4-pole
10-pole
2
3
4
10
Type
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
TW
TW
TW
TW
TW
TW
(2.5)
(2.5)
(2.5)
(1.5)
(1.5)
(1.0)
a r i # LR u DNV
6/36.5/46.5
04994600001) 10
04995600001) 10
Cat. No.
Qty.
0279520000 20
0279570000 20
0279530000 20
0460560000 20
0460580000 20
0302820000
0302870000
0302830000
0302860000
0302880000
0297100000
20
20
20
20
20
20
AP (1.5)
AP (1.5)
0279560000
0279580000
20
20
TW
TW
TW
TW
TW
TW
0302820000
0302870000
0302830000
0302860000
0302880000
0297100000
20
20
20
20
20
20
(2.5)
(2.5)
(2.5)
(1.5)
(1.5)
(1.0)
TSch 1
0319160000 100
TSch 1
0319160000
100
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
50
50
50
20
AD 4
0303400000
BSKM3x22 0128900000
50
100
2
3
4
10
50
50
50
20
2
3
4
10
Type
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
04436600001)
04436800001)
13236600001)
05304600001)
05303600001)
Cat. No.
0117920000
0117970000
0117930000
0117960000
0117980000
TW
TW
TW
TW
TW
TW
0130120000
0103170000
0130130000
0130160000
0130180000
0197100000
20
20
20
20
20
20
TSch 1
0319160000
100
Q
Q
Q
Q
0336700000
0336800000
0336900000
0368800000
50
50
50
20
(2.5)
(2.5)
(2.5)
(1.5)
(1.5)
(1.0)
2
3
4
10
100
100
100
10
10
Qty.
20
20
20
20
20
Cover plates
AD 4
0303400000 50
BSKM3x22 0128900000 100
Switchable cross-connection link
VL 2
BS
VH
Marking tags
DEK
Print
Standard
DEK 5
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
AD 4
0285300000
50
BSK M3x22 0128900000 100
VL 2
VH
BS
0197000000
0285100000
0292500000
100
50
100
DEK6.5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1)
2)
126
Contact-proof with ADP 4 cover profile (see section “Accessories”)
Not suitable for SST 3 safety pin
3)
Cat. No. 0279660000, 0279680000, 0380460000
and 0380480000, 41 A for 6 mm2
Feed-through terminals
DK 4 Q*
DKB4 Q*/10*
Y
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
With/without plastic insulating collar
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Technical data
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal block with marking PA
Terminal block without marking PA
End plate (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
PA
Blue PA
Partition (thickness mm)
TW
WTW
KrG
Blue KrG
KrS
PA
Blue PA
HP
Small partition
TSch 6
Switchable cross-connection link
VL 2
BS
2-pole
3-pole
4-pole
10-pole
2-pole
3-pole
4-pole
VH
Marking tags
DEK
Print
Standard
Y
Y
W
W
a r i # LR u DNV
6.5/40/51.5
ar#
6/54/60
6/54/60.5
9/M 3/3.5 x 0.6
ar#
6/54/60
6/54/60.5
9/M 3/3.5 x 0.6
800 V/32 A/4 mm2
8 kV/3
500 V/2 x 32 A/4 mm2
6 kV/3
500 V/2 x 32 A/4 mm2
6 kV/3
0.5…1.0
2
0.5…1.0
2
0.5…1.0
2
0.5…6
0.5…4
0.5…4
0.5…4
0.5…4
0.5…4
0.5…4
0.5…4
0.5…4
0.5…4
A4
41 A/6 mm2
0.5…4
A3
32 A/4 mm2
0.5…4
A3
32 A/4 mm2
36
32
32
32
32
600 V/20 A/22…12 AWG
600 V/36 A/26…10 AWG
Y
Cat. No.
Qty.
0128320000 100
0128370000 100
0128330000 100
01283600001)2)100
01283800001)2)100
01050600001)2)100
03226600001)2) 10
03088600001)2) 10
Type
Cat. No.
Qty.
AP (1.5) 0117920000
20
AP (1.5) 0117970000
20
AP (1.5) 0117930000
20
AP (1.5) 0117960000
20
AP (1.5) 0117980000
20
300 V/27 A/22…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
300 V/27 A/22…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
0590060000*1)100 05901600001) 100
0355460000100
0527660000100
0590080000*1)100 05901800001)100
0355480000100
0527680000100
TW
TW
TW
TW
TW
TW
(2.5)
(2.5)
(2.5)
(1.5)
(1.5)
(1.0)
TSch 1
Cross-connection
Q4
QB 4
DK 4
DK4/35
Q
Q
Q
Q
0130120000
0103170000
0130130000
0130160000
0130180000
0197100000
20
20
20
20
20
20
0319160000
100
SAK-series
SAK 4
SAK 4/10
1323860000*1) 10
Type
AP (1.5)
AP (1.5)
Cat. No.
Qty.
Type
Cat. No.
Qty.
1397160000
1397180000
20
20
AP (1.5)
AP (1.5)
1397160000
1397180000
20
20
WTW (Ex) 1058800000
20
WTW (Ex) 1058800000
20
TSch 6
0190260000 100
TSch 6
0190260000 100
2
3
4
10
0336700000
0336800000
0336900000
0368800000
50
50
50
20
Q2
Q3
Q4
Q 10
QB 2
QB 3
QB 4
0336400000 50
0336500000 50
0336600000 50
0368600000 20
0482700000**100
0482800000** 50
0482900000** 50
Q2
Q3
Q4
Q 10
QB 2
QB 3
QB 4
0336400000 50
0336500000 50
0336600000 50
0368600000 20
0482700000**100
0482800000** 50
0482900000** 50
VL 2
VH
BS
0197000000
0285100000
0292500000
100
50
100
VL 2
VH
BS
0446700000 50
1056500000 100
0343100000 100
VL 2
VH
BS
0446700000 50
1056500000 100
0343100000 100
DEK 6.5
see “Accessories”
DEK6
see “Accessories”
DEK6
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* Accepts LS 2.8 shield lugs Cat. No. 1056400000
** 2.5 mm2 conductor connection when using QB
1)
2)
Contact-proof cross-connec. with ADP 4 over profile (see “Accessories”)
Not suitable for fuse pin SST 3
127
Feed-through terminals
DK4 QV*
DK4 QV/35*
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
With/without plastic insulating collar
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal block with marking
Terminal block without marking
End plate (thickness mm)
AP
Partition (thickness mm)
TW
WTW
Small partition
KrG
Blue KrG
KrS
PA
Blue PA
TSch 6
Cross-connection
Q4
QB 4
2-pole
3-pole
4-pole
10-pole
SAK 10
SAK 10/10/35
Y
Y
Y
W
W
W
SAK 16
SAK 16/35
Y
W
ar#
6/54/60
6/54/60.5
9 mm/M 3/3.5 x 0.6
a r i # LR u DNV
8/40/51.5
8/45/44
12 mm/M 3.5/4.0 x 0.8
a r i # LR u DNV
10/40/51.5
10/45/44
12 mm/M 4/5.5 x 1.0
a r i # LR u DNV
12/50/57.5
12/50/50
15 mm/M 4/5.5 x 1.0
500 V/32 A/4 mm2
6 kV/3
800 V/41 A/6 mm2
8 kV/3
800 V/57 A/10 mm2
8 kV/3
1000 V/76 A/16 mm2
8 kV/3
0.5…1.0
2
0.8…1.6
3
1.2...2.03)
4
1.2…2.4
4
0.5…4
0.5…4
0.5…4
0.5…10
0.5…6
0.5…10
1.5…10
2.5…16
1.5…10
2.5…10
4…162)
4…16
0.5…4
A3
32 A/4 mm2
0.5…6
A5
1.5…10
B6
76 A/16 mm2
4…16
B6
32
32
41
57
300 V/27 A/22…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
600 V/40 A/22…8 AWG
600 V/47 A/20…8 AWG
Y
Qty. W
Qty.
600 V/60 A/14…6 AWG3)
600 V/65 A/14…6 AWG3)
Y
Qty. W
Qty.
600 V/80 A/12…4 AWG
600 V/87 A/10…4 AWG
Y
Qty. W
Qty.
0193220000100 0380520000100
0110020000 100 0443720000 100
0271020000 50 0380620000 50
0380570000100
0110070000 100 0443770000 100
76
0193230000100
0110030000 100
0271030000 50
0590260000*1)1000363660000*1)100
01932600001)10003805600001)100
01100600001)100 04437600001) 100
02710600001)50 03806600001)50
0590280000*1)1000363680000*1)100
01932800001)10003805800001)100
01100800001)100 04437800001) 100
02710800001)50 03806800001)50
03227600001) 10
05538600001) 10
03089600001) 10
Type
KrG
Blue KrG
KrS
PA
Blue PA
SAK 6 N
SAK 6/10/35
AP (1.5)
AP (1.5)
Cat. No. Qty.
1397160000
1397180000
WTW (Ex) 1058800000
20
20
20
TW (2.0)
TSch 6
0607000000
0190260000
20
100
Q2
Q3
Q4
Q 10
QB 2
QB 3
QB 4
0336400000
0336500000
0336600000
0368600000
0482700000**
0482800000**
0482900000**
50
50
50
20
100
50
50
03531600001) 10
Type
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
0117920000
0117970000
0117930000
0117960000
0117980000
Qty.
20
20
20
20
20
Type
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
0117920000
0117970000
0117930000
0117960000
0117980000
Qty.
20
20
20
20
20
Type
AP (3.0)
Cat No.
0271120000
Qty.
20
AP (3.0)
AP (1.5)
AP (1.5)
0271130000
0271160000
0271180000
20
20
20
TW (1.5)
0130120000
20
20
20
20
20
20
100
20
20
20
20
20
20
100
0281120000
0130130000
0130160000
0130180000
0197100000
0319160000
0130120000
0130170000
0130130000
0130160000
0130180000
0197100000
0319160000
TW (3.0)
TW (1.5)
TW (1.5)
TW (1.5)
TW (1.5)
TSch 1
TW (1.5)
TW (1.5)
TW (1.5)
TW (1.5)
TW (1.5)
TW (1.5)
TSch 1
TW (3.0)
TW (1.5)
TW (1.5)
TW (2.0)
TSch 1
0281130000
0303660000
0303680000
0607000000
0319160000
20
10
10
20
100
Q
Q
Q
Q
0456700000
0456800000
0456900000
0457000000
50
50
50
20
Q
Q
Q
Q
0457100000
0457200000
0457300000
0457400000
50
50
50
20
Q
Q
Q
Q
2
3
4
10
0457500000
0457600000
0457700000
0457800000
50
50
50
20
0518200000
50
2
3
4
10
2
3
4
10
Cover
AD 4
0303400000
BSK M 2.5 x18
0303300000
Switchable cross-connection link
VL 2
BS
VH
Marking tags
DEK
Print
Standard
50
AD 4
0196600000 50
BSKM3x22 0128900000 100
AD 4
0178600000 50
BSKM3x22 0128900000 100
AD 4
VL 2
VH
BS
0135900000
0285100000
0292500000
VL 2
VH
BS
0135800000
0285100000
0292500000
DEK 5
see “Accessories”
DEK 5
see “Accessories”
BSKM3x22 0128900000 100
100
VL 2
VH
BS
04467000000 50
10565000000 100
03431000000 100
VL 2
VH
BS
0194700000
0285100000
0292500000
50
50
100
DEK 6
see “Accessories”
DEK 8
see “Accessories”
50
50
100
50
50
100
Mounting rails, end brackets, further marking material see “Accessories”
* Accepts LS 2.8 shield lugs Cat. No.1056400000
** 2.5 mm2 conductor connection when using QB
128
1)
Contact-proof with ADP 4 cover
profile (see section “Accessories”)
2)
Tightening torque for 16 mm2
stranded: 2 Nm
3)
Tightening torque for 16 mm2
and AWG6: 2 Nm
Feed-through terminals
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
KrG
Hexagon socket KrG
Hexagon socket Blue KrG
KrS
Hexagon socket KrS
PA
Hexagon socket PA
Blue PA
End plate (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
SAK 35
SAK 35/35
SAK 70
SAK 70/35
SAK 95
SAK 95/35
Y
Y
Y
Y
W
W
W
W
a r # u DNV
16/58/67.5
16/63/60
18 mm/M 6/6.5 x 1.2
a r i # LR u DNV
18/58/67.5
18/58/60
20 mm/M 6/6.5 x 1.2
a r # LR u DNV
22/75/79.5
22/75/87
24 mm/M 8/S 6 D911
a r # DNV
28/83.5/100.5
28/83.5/96.5
30 mm/M 10/S 8 D6911
1000 V/125 A/35 mm2
8 kV/3
800 V/125 A/35 mm2
8 kV/3
1000 V/192 A/70 mm2
8 kV/3
1000 V/232 A/95 mm2
8 kV/3
4.0…5.0/4.0…6.0***
4.0…5.0/4.0…6.0***
6.0…12.0
10.0…20.0
2.5…16
2.5…50
2.5…35
2.5…35
B8
125 A/35 mm2
65
65
6…16
16…50
10…35
10…35
B9
125 A/35 mm2
99
99
Strips
16
3x9x0.8
16…70 1)
6x9x0.8
16…70 1)
6x13x0.5
16…35
B 11
192 A/70 mm2
180
10…16
10…120 2)
10…95 2)
10…35
B 12
232 A/95 mm2
180
600 V/100 A/12…2 AWG
600 V/120 A/12…2 AWG
Y
Qty. W
Qty.
600 V/100 A/6…2 AWG
600 V/145 A/6…2 AWG
Y
Qty. W
Qty.
0303520000 20
0476520000 20
600 V/145 A/4…2/0 AWG
600 V/150 A/4…2/0 AWG
Y
VPEW
Qty.
600 V/190 A/6…3/0 AWG
600 V/260 A/6…3/0 AWG
Y
Qty. W
Qty.
0340820000 10
0340870000 10
0550520000 10 0662220000 10
0550620000 20 0608220000 20
0555720000 20 0608320000 20
0608370000 20
0550630000 20
Strips
3x9x0.8
6x9x0.8
6x13x0.5
6x16x0.8
0303530000 20
0340830000 10
0555730000 20
0550660000 20 0608260000 20
0303560000 20 0380760000 20
0555760000 20 0608360000 20
0476560000 20 0582460000 20
013916000010
0303580000 20 0380780000 20
Type
AP (3.0)
AP (3.0)
AP (3.0)
AP (1.5)
AP (3.0)
Cat. No.
Qty.
0303620000 10
0303670000 10
0303630000 10
0303660000 10
0303680000 10
Type
AP (3.0)
AP (3.0)
AP (3.0)
AP (1.5)
AP (3.0)
Cat. No.
Qty.
0303620000 10
0303670000 10
0303630000 10
0303660000 10
0303680000 10
TW (3.0)
0304320000 10
TW (3.0)
0304320000 10
TW (3.0)
TW (1.5)
0304330000 10
0304360000 10
TW (3.0)
TW (1.5)
0304330000 10
0304360000 10
QL 2
QL 3
QL 4
QL 10
VH 17
BS M 4x30
SS M 4
0564900000 50
0565000000 50
0565100000 50
0565200000 20
0267000000 50
0267100000 50
0136400000100
QL 2
QL 3
QL 4
QL 10
VH 17
BS M 4x30
SS M 4
0123600000 20
0123700000 20
0123800000 20
0338600000 20
0267000000 50
0267100000 50
0136400000100
VL 2
VH 24.5
BS M 4x35
0124000000 50
0298700000 50
0298900000 50
Type
AP (4.0)
Cat. No.
Qty.
0340920000 10
Type
AP (3.0)
AP (3.0)
Cat. No.
Qty.
0550920000 10
0550970000 10
AP (4.0)
AP (2.0)
0340930000 10
0340960000 10
QL 2
QL 3
0345300000 20
0167000000 20
QL 2
QL 3
QL 4
0551200000 10
0407600000 10
0407700000 10
VH 30.5
BS M 5x45
SS M 5
0345500000 20
0345600000 20
0346100000100
VH 35
BS M 5x50
0551100000 10
0630200000 20
Partition (thickness mm)
KrG
Blue KrG
KrS
PA
Blue PA
Cross-connection
QL 3
VH
BS
SS
Switchable cross-connection link
VL 2
BS
2-pole
3-pole
4-pole
10-pole
VH
Cover / test plug
PS 4
Marking tags
DEK
Print
Standard
AD 4
0576700000 50
BSK M 4x32 0129100000 50
PS 4
0299600000 20
AD 4
0178700000 20
BSK M 4x32 0129100000 50
PS 4
0299600000 20
AD 3
0344300000 10
BSKM 5x45 0344400000 50
PS 4
0299600000 20
ADP 3
0485400000 20
PS 4
0299600000 20
DEK 5
DEK 5
DEK 5
DEK 5
see “Accessories”
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
*** For hexagon socket
1)
2)
see “Accessories”
see “Accessories”
12 Nm for 70 mm2
20 Nm for 95 mm2 and 120 mm2
129
SAK-series
SAK 35 N
SAK 35 N/35
Feed-through terminals (spring-loaded)
RSF 3
RSF 3/35
RSF 1
Disconnect test terminal
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Version
PA
KrG
End plate/partition/small partition
AP
TW
TSch 1
VH
r
8/50/60
8/50/53
12 mm
ar
11/50/60
11/77/72.5
12 mm
12 mm
630 V/32 A
4
6 kV / 3
500 V/57 A
10
6 kV / 3
500 / 41 A
6
6 kV / 3
0.5…10
0.5…10
0.75...16
0.75...10
0.5…1.0
2
0.5…4
0.5…4
UL
CSA
Ordering data
Cross-connection
QL
Y
Y
Y
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section
mm2
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
RSF 2
SS
PA
KrG
PA
HP
HP
PA
2-pole
3-pole
4-pole
10-pole
BS M 3 x ...
Switchable cross-connection link
VH 21
Y
Qty. W
Qty.
0497560000 50 9501160000 50
0497520000 50
Y
Qty. W
Qty.
0270320000 50
Type
Cat. No.
Y
Qty. Y
Qty.
0623320000*200623120000**20
Type
AP (3)
Cat. No.
Qty.
0270460000 10
Qty.
AP (3)
0270420000 10
TW (1.5)
TW (2)
TW (0.5)
TSch 1
3877960000 10
3833500000 20
0474700000 20
0319160000100
TW (2)
TW (0.5)
3833500000 20
0474700000 20
QL 2
QL 3
QL 4
QL 10
VH 13.5
0194300000 50
0194400000 50
0194500000 50
0338300000 10
0248500000100
QL 2
QL 3
QL 4
QL 10
VH 17.5
0194300000
0194400000
0194500000
0338300000
0285200000
BS M 3x20
0303000000 100
BS M 3x25
SS
QS 4
0292500000 100
0164400000 50
0369760000 10
VH 2
VH 21
BS M 3x20
SS
0194700000 50
0309600000100
0296200000 50
0164400000 50
VH 2
VH 27
BS M 3x25
SS
0528400000
0309400000
0309800000
0164400000
50
50
50
10
50
Type
AP (3.0)
QL
QL
QL
QL
2
3
4
10
Cat. No.
Qty.
0301420000
0267400000
0267500000
0267600000
0341700000
10
50
50
50
20
BS M 4x6
SB 14
0149700000 100
0135300000100
BST 1
3878060000 20
PS 4
StB 17
0299600000 20
0147100000 50
50
50
50
50
Dummy plug
made from plastic,
to keep the place of an
extracted plug
Test plug/socket
PS
StB
Cover plate
Marking tags
PS 2.3
StB 14
0180400000 50
0168600000 50
PS 2.4
StB 18
0299600000 20
0286500000 20
ADP 2
0485300000 1
ADP 2
0485300000 1
DEK
see “Accessories”
DEK
see “Accessories”
Plug-testsocket (QL cannot be used)
Print
Standard
* with disconnector (73 mm height)
** Disconnector with handle (86 mm height)
130
Feed-through terminals for thermocouples
Busbars made from thermocouple materials
according to DIN IEC 584
SAK 2.5 TC
DK 4 Q/TC
Y
Weidmüller’s thermocouple-treminals
are specially designed for transmitting the
smallest voltages in temperature measuring circuits. Special busbars ensure that
no false signals occur in the terminal when
temperature differences exist in the positive and negative path.
This high measuring precision is necessary
for, e.g. test beds, air craft engines, for
complicated chemical processes, controls,
etc.
W
Y
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Technical data/VDE
Rated voltage/current/cross-section
Tightening torque range
Nm
6/36.5/49.5
10 mm/M 2.5/3.5 x 0.6
6/54/59.5
6/54/60.5
9 mm/M 3/3.5 x 0.6
–/–/2.5 mm2
–/–/4 mm2
0.4…0.6
0.5…1
1 Thermocouple (sensor)
4 Reference point
2 Thermocouple terminals
5 Supply conductors (to and from)
SAK-series
I. Configuration of a
temperature measuring circuit
Ordering data
3 Compensation conductor 6 Measuring device
The thermocouple terminals displayed in
this measurement circuit are used to thermoelectrically transmit thermal e.m.f. of
the thermocouple to the reference point
and indicating device via the thermocouple.
Version
NiCr
Ni
CuNi
Fe
Cu
NiCr/Ni
Cu/CuNi
Fe/CuNi
Type
a) Type J
Fe
(positive leg)
CuNi
(negative leg)
b) Type T
Cu
(positive leg)
CuNi
(negative leg)
c) Type K
NiCr
(positive leg)
Ni
(negative leg)
W
Y
Qty.
1284160000 1338260000 100
1285660000 1338160000 100
1284060000 1338060000 100
Type
KrG
Blue KrG
KrS
PA
Blue PA
Orange PA
Terminal
Cat. No.
Qty.
0107260000100
0107160000100
0189860000100
0190060000100
0189960000100
K
T
J
End plate (thickness mm)
II. Symbols
Thermocouples according to IEC 584
DIN 43710
Y
Cat. No.
Qty.
AP (1.5)
0279560000 20
TW (1.5)
0302860000 20
Type
AP (1.5)
Cat. No.
Qty.
1397160000 20
Partition (thickness mm)
KrG
Blue KrG
KrS
PA
WEM
for TS 32 HP
Busbar material
trade name
WTW (Ex)e 1058800000 20
TW HP (2.0) 0607000000 20
Iron
Constantan
Copper
Constantan
Chromel
Alumel
Marking tags
DEK
Print
Standard
DEK 6
see “Accessories”
DEK 6
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
131
Feed-through terminals
Terminals/Accessories
SAKG 28 I
SAKG 28 II
Y
The Weidmüller SAKG range offers the following connection variants:
• clamping yoke/flat lug as a combination,
Version I.
• flat lug, Version II.
Two types of threading are provided
here.
a) screw set with lock nut
b) with thread in busbar
• clamping yoke connection, Version III.
The stripped conductor can be connected without further preparation.
Versions
Version I
Version II
without thread
Version II G
with thread
Version III
Cables with cable lugs are connected to
SAKG terminals of Version I and to SS
stud terminals.
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
End plate, hard paper
0205100000
0205200000
tropic-proof
ar#u
28/70/63.5
a r # u DNV
28/70/53
15 mm/M 6/–
–/M 6/–
1000 V*/125 A/35 mm2
8 kV/3
1000 V*/125 A/35 mm2
8 kV/3
3…6
3…6
6…35
6…35
10…35
6…35
B9
125 A/35 mm2
(QL 2) 125
125 A/35 mm2
(QL 2) 125
600 V/95 A/2 AWG
600 V/110 A/6…1 AWG
Y
Cat. No.
Qty.
0170020000 10
600 V/115 A/2 AWG
600 V/110 A/6…1 AWG
Y
Cat. No.
Qty.
0170320000 10
Y
EP 1 (2)
EP 1 (2)
W
Fitting instructions for SAKG terminals
When tightening the clamping screw, it is
recommended that the conductor be held
against the direction of tightening to prevent deformation of the mounting rail and
so as not to place the terminal foot under
undue torsional forces.
UL
CSA
Type
KrG
Y
Cat. No.
Qty.
0205100000 10
0205200000 10
Cat. No.
Qty.
Y
EP 1 (2)
EP 1 (2)
W
Cat. No.
Qty.
0205100000 10
0205200000 10
Cat. No.
Qty.
0180700000, 0205300000
0180800000, 0205400000 tropic-proof
Partition, hard paper (thickness in mm)
0151400000
0164600000
tropic-proof
0177100000 B/L/H (incl. TS 32) mm
0179900000 B/L/H (incl. TS 35) mm
TW 1 (2)
TW 1 (2)
Y
Qty.
0151400000 10
0164600000 10
2/120/75.5
TW 1 (2)
TW 1 (2)
Y
Qty.
0151400000 10
0164600000 10
2/120/75.5
Cross-connection
2-pole
3-pole
4-pole
QL 2
QL 3
QL 4
0193900000 5
0407600000 5
0407700000 5
QL 2
QL 3
QL 4
0193900000
0407600000
0407700000
5
5
5
AH 28
0326660000 5
AH 28
0326660000
5
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Cover
Cover
To ensure shock protection following
connections of conductors, AH covers
can be clipped onto the terminal.
Marking tags
DEK
Print
Standard
Mounting rails, end brackets, further marking material see “Accessories”
During conductor connection, observe clearance and creepage distances. Insert partitions if necessary.
132
Feed-through terminals
SAKG 28 III
SAKG 32 I
SAKG 32/35 I
Y
Y
SAKG 32 II
SAKG 32/35 II
SAKG 32 II G
SAKG 32/35 II G
Y
W
Y
W
Y
W
SAKG 32 III
SAKG 32/35 III
Y
W
15 mm/M 6/-
ar#u
32/87/84
32/87/84.5
26 mm/M 8/-
ar#u
32/80/53
32/80/51
-/M 8/-
r # u DNV
32/80/53
32/80/53
-/M 8/-
ar#u
32/94/84
32/94/84.5
26 mm/M 8/-
1000 V*/125 A/35 mm2
8 kV/3
1000 V*/125 A/35 mm2
8 kV/3
1000 V*/150 A/50 mm2
8 kV/3
1000 V*/150 A/50 mm2
8 kV/3
1000 V*/150 A/50 mm2
8 kV/3
1000 V*/150 A/50 mm2
8 kV/3
3…6
3…6
6…12
6…12
6…12
6…12
6…35
6…35
10…35
6…35
B9
10…70
10…70
10…70
10…35
B 11
150 A/50 mm2
(QL 2) 150
150 A/50 mm2
(QL 2) 150
150 A/50 mm2
(QL 2) 150
600 V/165 A/3 AWG
600 V/170 A/1…2/0 AWG
Y
Qty. W
Qty.
0286620000 0637120000 10
600 V/200 A/3 AWG
600 V/170 A/1…2/0 AWG
Y
Qty. W
Qty.
0170420000 10 063732000010
600 V/170 A/1…2/0 AWG
Y
Qty. W
Qty.
0185120000 10 0637420000 10
r#u
28/70/53
ar#u
28/70/63.5
-/M 6/-
125 A/35 mm2
(QL 2) 125
600 V/110 A/6…1 AWG
Y
Cat. No.
Qty.
0185020000 10
Y
EP 1 (2)
EP 1 (2)
W
TW 1 (2)
TW 1 (2)
Cat. No.
Qty.
0205100000 10
0205200000 10
Cat. No.
Qty.
Y
Qty.
0151400000 10
0164600000 10
2/120/75.5
600 V/95 A/2 AWG
600 V/135 A/8…2 AWG
Y
Cat. No.
Qty.
0170820000 10
Y
EP 1 (2)
EP 1 (2)
W
TW 1 (2)
TW 1 (2)
0193900000
0407600000
0407700000
5
5
5
AH 28
0326660000
5
DEK 5
see “Accessories”
600 V/165 A/3 AWG
600 V/185 A/1…2/0 AWG
Y
Qty. W
Qty.
0286720000 10 0637220000 10
Cat. No.
Qty.
0205100000 10
0205200000 10
Y
EP 1 (2)
EP 1 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 1 (2)
EP 1 (2)
Cat. No.
Qty.
0205100000 10
0205200000 10
Y
EP 1 (2)
EP 1 (2)
Cat. No.
Qty.
0205100000 10
0205200000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Cat. No.
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
EP 1/35 (2)
EP 1/35 (2)
Cat. No.
Qty.
0180700000 10
0180600000 10
W
EP 1/35 (2)
EP 1/35 (2)
Cat. No.
Qty.
0180700000 10
0180600000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 1 (2)
TW 1 (2)
Y + W Qty.
0151400000 10
0164600000 10
TW 1 (2)
TW 1 (2)
Y + W Qty.
0151400000 10
0164600000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
Qty.
Y
Qty.
0151400000 10
0164600000 10
2/120/75.5
QL 2
QL 3
QL 4
10…70
10…70
10…70
10…35
B 11
150 A/50 mm2
2/160/90.5
2/160/90.5
AH 28
0326660000
DEK 5
see “Accessories”
5
2/120**/75.5
2/120**/75.5
2/160/90.5
2/160/90.5
2/120**/75.5
2/120**/75.5
QL 2
QL 3
QL 4
0194000000
0441500000
0441600000
5
5
5
QL 2
QL 3
QL 4
0194000000
0441500000
0441600000
5
5
5
QL 2
QL 3
QL 4
0194000000
0441500000
0441600000
5
5
5
AH 32
0326760000
5
AH 32
0326760000
5
AH 32
0326760000
5
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 5
see “Accessories”
AH 32
DEK 5
0326760000
5
see “Accessories”
* During conductor connection, observe clearance and creepage distances. Insert partitions if nececssary
** For Cat. No. 0180600000 and 0180700000: length = 160 mm.
133
SAK-series
SAKG 28 II G
Feed-through terminals
SAKG 70 II G
SAKG 70/35 II G
SAKG 40 I
SAKG 40/35 I
Y
W
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
KrG
End plate, hard paper (thickness mm)
0205100000, 0180500000
0205200000, 0180600000
tropic-proof
0180700000, 0205300000
0180800000, 0205400000tropic-proof
Partition, hard paper (thickness mm)
0151400000
0164600000
tropic-proof
0177100000 B/L/H (incl. TS 32) mm
0179900000 B/L/H (incl. TS 35) mm
SAKG 40 II
SAKG 40/35 II
SAKG 40 II G
SAKG 40/35 II G
Y
W
W
Y
W
r # u DNV
32/84/54
32/84/53
–/M 8/–
ar#u
40/95/84
46/95/85.5
27 mm/M 10/–
a r # u DNV
40/90/53
46/90/53
–/M 10/–
r#u
40/90/55
46/90/55
–/M 10/–
1000 V*/192 A/70 mm2
8 kV/3
1000 V*/232 A/95 mm2
8 kV/3
1000 V*/232 A/95 mm2
8 kV/3
1000 V*/232 A/95 mm2
8 kV/3
6…12
10...20
10…20
10…20
192 A/90 mm2
(QL 2) 192
10…95
10…95
10…95
10…35
B 12
232 A/95 mm2
(QL 2) 232
232 A/95 mm2
(QL 2) 232
232 A/95 mm2
(QL 2) 232
600 V/200 A/2/0…4/0 AWG
Y
Qty. W
Qty.
0150420000 10 0636620000 10
600 V/195 A/4/0 AWG
600 V/250 A/2/0…4/0AWG
Y
Qty. W
Qty.
028682000010 0637520000 5
600 V/230 A/4/0 AWG
600 V/250 A/2/0…4/0 AWG
Y
Qty. W
Qty.
017052000010 0637720000 5
600 V/230 A/4/0 AWG
600 V/250 A/2/0…4/0 AWG
Y
Qty. W
Qty.
0185220000 10 0637820000 5
Y
EP 1 (2)
EP 1 (2)
Cat. No.
Qty.
0205100000 10
0205200000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
W
EP 1/35 (2)
EP 1/35 (2)
Cat. No.
Qty.
0180500000 10
0180600000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
TW 1 (2)
TW 1 (2)
Y + W Qty.
0151400000 10
0164600000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
2/120/75.5
2/120/75.5
Cross-connection
2/160/90.5
2/160/90.5
Y + W Qty.
0194000000 10
0441500000 10
0441600000 10
2-pole, QL 2
3-pole, QL 3
4-pole, QL 4
Y
Q t y. W
2/160/90.5
2/160/90.5
Qty.
Y
2/160/90.5
2/160/90.5
Qty. W
Qty.
Y
Qty. W
Qty.
0194100000 10 0211400000 10
0194100000 10 0211400000 10
0194100000 10 0211400000 10
0263500000 10 0444900000 10
0263500000 10 044490000010
0263500000 10 0444900000 10
0409800000 10 0445000000 10
0409800000 10 044500000010
0409800000 10 0445000000 10
AH 40
0326860000 5
AH 40
0326860000 5
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Cover
Marking tags
DEK
Print
Standard
AH 32
0326760000 5
AH 40
0326860000
5
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
*During conductor connection, observe clearance and creepage distances. Insert partitions if necessary.
134
Feed-through terminals
SAKG 40 III
SAKG 40/35 III
SAKG 46 II
SAKG 46/35 II
Y
W
SAKG 46 II G
SAKG 46/35 II G
SAKG 54 II
SAKG 54/35 II
Y
W
Y
W
SAKG 54 II G
SAKG 54/35 II G
SAKG 46/I AL
SAKG 46/II AL
Y
W
Y
W
Y
ar#u
40/100/84
46/100/85.5
27 mm/M 10/–
ar#u
46/106/55
46/106/54.5
–/M 12/–
r # u DNV
46/106/57.5
46/106/57
–/M 12/–
ar#u
54/122/57
54/122/57
–/M 16/–
a r # u DNV
54/122/60
54/122/60
–/M 16/–
1000 V*/232 A/95 mm2
8 kV/3
1000 V*/309 A/150 mm2
8 kV/3
1000 V*/309 A/150 mm2
8 kV/3
1000 V*/415 A/240 mm2
8 kV/3
1000 V*/415 A/240 mm2
8 kV/3
1000 V*/309 A/150 mm2
8 kV/3
10…20
14…31
14…31
25…60
25…60
14…31/25…40
46/112/74
23 mm/M 12/M 14/-
50…240
35…185
309 A/150 mm2
309 A/150 mm2
(QL 2) 309
415 A/240 mm2
(QL 2) 415
415 A/240 mm2
(QL 2) 415
600 V/195 A/4/0 AWG
600 V/230 A/2/0…4/0 AWG
Y
Qty. W
Qty.
0286920000 10 0637620000 5
600 V/285 A/4/0 AWG
600 V/365 A/300 MCM
Y
Qty. W
Qty.
0170620000 10 0637920000 5
600 V/285 A/4/0 AWG
600 V/365 A/300 MCM
Y
Qty. W
Qty.
0185320000 10 0638020000 5
600 V/380 A/500 MCM
600 V/600 A/300…500 MCM
Y
Qty. W
Qty.
0170720000 10 0638120000 5
600 V/380 A/500 MCM
600 V/600 A/300…500 MCM
Y
Qty. W
Qty.
0185420000 10 0638220000 5
SAK-series
10…95
10…95
10…95
10…35
B 12
232 A/95 mm2
Y
Qty. W
1287920000** 5
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
Cat. No.
Qty.
0205300000 10
0205400000 10
Y
EP 2 (2)
EP 2 (2)
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No. Qty.
0180700000 10
0180800000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
EP 2/35 (2)
EP 2/35 (2)
Cat. No.
Qty.
0180700000 10
0180800000 10
W
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
Y + W Qty.
0177100000 10
0179900000 10
2/160/90.5
2/160/90.5
2/160/90.5
2/160/90.5
AH 40
0326860000
DEK 5
see “Accessories”
5
2/160/90.5
2/160/90.5
2/160/90.5
2/160/90.5
QL 2
QL 3
QL 4
0247000000
0444400000
0444500000
5
5
5
QL 2
QL 3
QL 4
0247000000
0444400000
0444500000
5
5
5
AH 46
0326960000
5
AH 46
0326960000
5
DEK 5
see “Accessories”
DEK 5
see “Accessories”
QL 2
QL 3
QL 4
DEK 5
* During conductor connection, observe clearance and creepage distances. Insert partitions if necessary.
** Suitable for connection of 1 aluminium conductor of max 185 mm2
2/160/90.5
2/160/90.5
0264400000
0408000000
0247400000
see “Accessories”
5
5
5
QL 2
QL 3
QL 4
DEK 5
Qty.
Cat. No.
Qty.
0205300000 10
0205400000 10
Cat. No.
Qty.
Y
Qty.
0177100000 10
0179900000 10
TW 2 (2)
TW 2 (2)
2/160/90.5
2/160/90.5
0264400000
0408000000
0247400000
see “Accessories”
5
5
5
QL 2
QL 3
QL 4
0194000000
0441500000
0441600000
5
5
5
AH 46
0326960000
5
DEK 5
see “Accessories”
*** Suitable for connection of 2 aluminium conductors of max.
185 mm2
135
Stud terminals
KST 5
KST 5/35
KST 6
KST 6/35
KST 8
KST 8/35
21
18
Y
W
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
KrG
for TS 35 x 7.5
for TS 35 x 15/2.3
PA
Hard paper
HM
HM
Width/length/height (incl. TS 32) mm
Width/length/height (incl. TS 35) mm
W
W
W
18/40/62
18/49.5/54.5
–/M 6/–
ar#
24/60/55
24/62.5/49.5
–/M 5/–
ar#
24/60/62
24/62.5/54.5
–/M 6/–
ar#
24/60/72
24/62.5/64.5
–/M 8/–
1000 V1)/76 A/16 mm2
6 kV/3
1000 V1)/57 A/10 mm2
8 kV/3
1000 V1)/76 A/16 mm2
8 kV/3
1000 V1)/125 A/35 mm2
8 kV/3
3…6
2…4
3…6
6…12
82 A/16 mm2
65 A/10 mm2
82 A/16 mm2
200
135 A/35 mm2
200
600 V/85 A/12…4 AWG
600 V/65 A/6 AWG
Y
Qty. W
Qty.
0498220000 25 0649820000 25
600 V/50 A/12…6 AWG
600 V/65 A/12…6 AWG
600 V/115 A/12…2 AWG
PA
PPO
KrG
PA
PA
Partition, (thickness mm)
30
25
SS 6
SS 6/35
Y
Qty. W
Qty.
Y
Qty. W
Qty.
9503370000 25
Cat. No.
Qty.
TW SS6 (TS32)0455860000 10
Y
Qty. W
Qty.
9501320000 25
9508230000 25
9528300000 25
9506940000 25
9528310000 25
9506950000 25
9528320000 25
Y+ W
Y+ W
Y+ W
TWHGW (2)(TS 35)0607100000 20
TW right
TW left 2)
2/129/93
2/70/62.5
1718530000 10
1752800000 10
2/160/83.5
2/160/78.5
TW right
TW left
1718530000 10
1752800000 10
2/160/83.5
2/160/78.5
TW right
TW left
1718530000 10
1752800000 10
2/160/83.5
2/160/78.5
Cross-connection
2-pole
3-pole
Marking tags
DEK
Print
Standard
QL 2
QL 3
0284300000 20
0279000000 20
QL 2
9503390000
DEK 5
see “Accessories”
DEK 5
see “Accessories”
1
QL 2
9501350000
DEK 5
see “Accessories”
5
QL 2
9501360000
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* Depends on cable lug
136
1)
with partition
2)
Left AP is required only once at beginning of terminal strip
1
Stud terminals
KST 12
KST 12/35
39
37
KST 10
KST 10/35
ar#
34/60/82
34/62.5/74.5
–/M 12/–
1000 V1)/192 A/70 mm2
8 kV/3
1000 V1)/232 A/95 mm2
8 kV/3
10…20
14…31
207 A/70 mm2
200
250 A/95 mm2
200
600 V/175 A/12…2/0
600 V/200 A/12…3/0
Y
Qty. W
Qty.
Y
Qty. W
SAK-series
W
W
ar#
34/60/82
34/62.5/74.5
–/M 10/–
Qty.
9501330000 20
TW right
TW left
9506960000 20
9528330000 20
9506970000 20
9528340000 20
Y+ W
Y+ W
1718530000 10
1752800000 10
2/160/83.5
2/160/78.5
TW right
TW left
1718530000 10
1752800000 10
2/160/83.5
2/160/78.5
QL 2
9501370000
DEK 5
see “Accessories”
1
QL 2
9501380000
DEK 5
see “Accessories”
1
137
PE terminals
EK 2.5 N
EK 2.5/35
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-2
Rated voltage/current with PEN/cross-section
Rated voltage/rated impulse voltage acc. to VDE 0110/1.89/
pollution severity
Further technical data
Tightening torque range
Nm
Clampable conductor
Solid H07V-U
Stranded H07V-R
Flexible H07V-K
Fexible H07V-K and ferrule DIN 46 228/1
Cable AWG
Plug gauge according to 60 947-7-1
Ordering data
mm2
mm2
mm2
mm2
Nr.
Size
Version
Green/yellow PA
Blank
Two clamping yokes blank
Hexagon socket blank
Support block
EK 4
EK 4/35
Y
Y
W
W
EK 6/35
EK 10
EK 10/35
Y
W
W
ar#
6/36.5/49.5
6/56/40
10 mm/M 2.5/3.5 x 0.6
ar#i
8/40/51.5
6.5/56/44
12 mm/M 3/3.5 x 0.6
8/56/44
12 mm/M 3.5/4.0/0.8
ar#
10/40/51.5
10/56/44
12 mm/M 4/5.5 x 1.0
–/–/2.5 mm2
–/–/4 mm2
–/–/6 mm2
–/–/10 mm2
0.4…0.8/0.5…1.0*
0.5…1.0/0.5…1.0*
1.2…1.6/0.5…1.0*
1.2…2.4/0.5…1.0*
0.5…4
0.5…2.5
0.5…4
0.5…2.5
22…14
A3
0.5…6
0.5…4
0.5…4
0.5…4
22…10
A4
0.5…10
1.5…6
0.5…10
0.5…6
20…8
A5
0.5…10
1.5…6
0.5…10
0.5…10
20….8
B6
Y
Qty. W
Qty.
Y
Qty. W
ar#
Qty.
0474360000100 0661060000100
0354560000100 0661160000100
Type
SH 2
Cat. No.
Qty.
0494920000 10
Type
SH 2
Cat. No.
0494920000
DEK 6
see “Accessories”
DEK 6.5
see “Accessories”
Qty.
10
W
Qty.
0661260000100
0354660000 80 0661360000100
Type
SH 2
Cat No.
Qty.
0494920000 10
Type
SH 2
Cat. No.
0494920000
DEK 8
see “Accessories”
DEK 5
see “Accessories”
Y
Qty. W
Qty.
Qty.
10
For insulation of mounting rails
in insulated-earth installations
SK - key, 8mm
Marking tags
DEK
Print
Standard
Mounting rails, end brackets, further marking material see “Accessories”
* For centre screw
138
PE terminals
EK 35**
EK 35/35
Y
Y
W
W
EK 2
SAKE 35
SAKE 70
Y
Y
Y
EK 95/35
W
ar#
12/50/57.5
12/56/50
16 mm/M 4/5.5 x 1.0
ar#
18/58/67.5
16/58/60
20 mm/M 6/6.5 x 1.2
r#
10/52/38
r#
14/46/39
r#
18/94/59.5
14 mm/M 4/–
16 mm/M 6/–
25 mm/M 8/–
25/76/100/92
25/76/100/92
27 mm/M 10/–
–/–/16 mm2
–/–/35 mm2
–/–/10
–/–/35 mm2
–/–/70 mm2
–/–/95 mm2
1.2…2.4/0.8…1.0*
2.5…5.0/ **
1.2…2.4/2.0…4.0*
2.5…5.0/2.0…4.0*
6.0…12/2.0…4.0*
10.0…20.0/1.2…2.4*
2.5…16
2.5…16
2.5…16
4…16
12…6
B6
6…16
16…50
10…35
10…35
10…2
B9
1.5…10
1.5…10
1.5…10
1.5…10
16…8
B6
6…35
6…35
6…16
10…35
8…2
B8
10…70
10…70
10…70
10…70
6…0
B 10
10…120
10…95
10…95
10…95
6…4/0
B 12
Y
Qty. W
Qty.
0374660000 50 0190160000 50
Type
SH 2
Cat. No.
Qty.
0494920000 10
Y
Qty. W
Qty.
0354760000 20 0661460000 20
Type
SH 2
Cat. No.
Qty.
0494920000 10
Qty.
20
Y
0323100000
Type
Cat. No.
Qty.
Y
Qty.
Qty.
Y
Qty. W
Qty.
0144400000 20
0213200000 20
1338300000 10
Type
SH 2
Type
SH 2
Cat. No.
Qty.
0494920000 10
Y
W
Qty.
0535300000 10
0535400000 10
Cat. No.
Qty.
0494920000 10
0235000000
DEK 5
see “Accessories”
DEK 5
see “Accessories”
** ADm f. EK 35/35 = 1.2 - 2.4 Nm
ADm f. EK 35
= 0.8 - 1.6 Nm
139
SAK-series
EK 16
EK 16/35
Fuse terminals
ASK 11)
ASK 1/351)
KDKS 11)
KDKS 1/351)
W
Y
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data/feed through-terminal base
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
PA
KrG
Beige Wemid
End plate/partition (thickness mm)
Y
W
SAKS 1/G25
SAKS 1/35/G25
Y
W
Y
W
ar#
8/58/45.5
8/58/44
9 mm/M 3/3.5 x 0.6
a
8/73.5/59,8
8/73.5/55,7
9 mm/M 3/3.5 x 0.6
a r i # DNV
13/54/61
13/54/54
12 mm/M 4/5.5 x 1.0
r i # u DNV
13/54/61
13/54/54
12 mm/M 4/5.5 x 1.0
500 V/6.3 A2)/4 mm2
6 kV/3
500 V/6.3 A/4 mm2
6 kV/3
500 V/6.3 A3)/10 mm2
6 kV/3
500 V/6.3 A3)/10 mm2
6 kV/3
0.5…1.0
2
0.5…1.0
2
1.2…2.4
4
1.2…2.4
4
0.5…4
1.5…4
0.5…4
0.5…4
A3
(QB 2…4) 10
0.5…4
0.5…16
1.5…10
0.5…10
0.5…10
B6
(QL 2…5) 47
(QL 6…10) 36
0.5…16
1.5…10
0.5…10
0.5…10
B6
(QL 2…5) 47
(QL 6…10) 36
300 V/6.3 A/12 max. AWG
300 V/6.3 A/26…12 AWG
Y+W Cat.No.
Qty.
0474560000 100
300 V/15 A/12 max. AWG
300 V/6.3 A/22…10 AWG
600 V/10 A/26…10 AWG
Y
Qty. W
Qty.
600 V/10 A/26…10 AW
Y
Qty. W
Qty.
Type
AP (1.5)
G-fuse inserts
Acc. to IEC 60127-2 (VDE 0820 T.2 Bl 1) rated current (A):
Rated voltage 250 V
Fast switching capacity 1500 A
(at 250 V, 50 Hz, cos ϕ = 0.7)
SAKS 1
SAKS 1/35
0.5…4
0.5…4
A4
(QB 2…4) 10
Cat. No.
Qty.
0380360000 20
Qty.
9503300000 50 9503310000 50
10
10
10
10
10
10
10
10
0553300000 100
0553300000 100
0430300000
0430400000
0430500000
0430600000
0430700000
0430800000
0430900000
0431000000
Contact sleeve
Qty. W
Type
Cat. No. Qty.
AP 1 KDKS 9503330000 25
Wemid
9532470000 25
for Y TW (2.0)
0607000000 20
5 x 20 mm
0430300000 10
0430400000 10
0430500000 10
0430600000 10
0430700000 10
0430800000 10
0430900000 10
0431000000 10
5 x 20 mm
0.10 fast
0.20 fast
0.25 fast
0.50 fast
1.0 fast
1.6 fast
2.0 fast
2.5 fast
3.15 fast
4.0 fast
5.0 fast
6.3 fast
Y
0191220000 20 0501620000 20
0191120000 20 050152000020
0501500000 20
Type
Cat. No. Qty.
AP (2.5)
0191320000 20
Wemid beige 0191300000 20
for Y TW (2.0)
0607000000 20
5 x 20 mm
0430300000 10
0430400000 10
0430500000 10
0430600000 10
0430700000 10
0430800000 10
0430900000 10
0431000000 10
Type
Cat. No.
Qty.
AP (2.5)
0191320000 20
Wemid-beige 0191300000
for Y TW (2.0)
0607000000 20
5 x 25 mm
0.25 (m)
0546900000 10
0.5 (m)
0510300000 10
0.8 (m)
0646400000 10
1 (m)
0265800000 10
10 (m)
0193100000 10
2 (f)
0192700000 10
4 (f)
0192800000 10
6.3 (f)
0192900000 10
Screw cap/disconnector lever (spare)
Marking tags
DEK
Red pull lever
Print
Standard
TH
SIHA
0377060000 100
1593020000 100
TH
SIHA
0377060000 100
1593020000 100
SK (5 x 20)
0282100000 20
SK (5 x 25)
0282000000 20
DEK 8
see “Accessories”
DEK 8
see “Accessories”
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1)
140
Multipole interruptable with group marking carrier
Sch2 2-pole Cat. No. 1359500000, 1000 mm Cat. No. 0337400000
Fuse terminals
KSKM 2
KSKM 2/35
Y
KSKM 3
KSKM 3/35
Y
Y
13/69/62
13/69/63
12 mm/–/–
13/69/62
13/69/63
12 mm/–/–
13/69/62
13/69/63
12 mm/–/–
250 V/6.3 A1)/10 mm2
250 V/13 A2)/10 mm2
440 V/10 A/10 mm2
0.5…16
0.5…16
0.5…16
0.5…10
0.5…10
0.5…10
B6
B6
B6
600 V/10 A/22…8 AWG
600 V/15 A/22…8 AWG
600 V/15 A/22…8 AWG
Y
Qty. W
Qty.
Y
Qty. W
Qty.
9509570000 20 9509600000 20
9509580000 20 9509610000 20
Type
AP (3)
Cat. No.
Qty.
9509630000 20
Type
AP (3)
5 x 20 mm
0.10 (f)
0.20 (f)
0.25 (f)
0.50 (f)
1.00 (f)
1.60 (f)
2.00 (f)
2.50 (f)
3.15 fast
4.0 fast
5.0 fast
6.3 fast
0430300000
0430400000
0430500000
0430600000
0430700000
0430800000
0430900000
0431000000
0431100000
0431200000
0431300000
0431400000
5 x 20 SBL
0446100000 40
DEK 5
1)
2)
Cat. No.
Qty.
9509630000 20
1 x 1/4”
see “Accessories”
Y
Qty. W
SAK-series
KSKM 1
KSKM 1/35
Qty.
9509620000 20
Type
AP (3)
Cat. No.
Qty.
9509630000 20
1 1/4 x 1/4”
10
10
10
10
10
10
10
10
10
10
10
10
E
E
E
E
E
2A
3A
5A
7A
10 A
0294500000
0295700000
0294600000
0295800000
0293900000
10
10
10
10
10
1 x 1/4" SBL 0446200000 40
1 1/4 x1/4"SBL 0446300000 40
DEK 5
DEK 5
see “Accessories”
see “Accessories”
Max. fuse rating according to DIN 41 660, IEC 127 CEE4 Type 1
Fuse according to BS 1362
141
Fuse terminals
SAKS 3
SAKS 3/35
SAKS 4
SAKS 4/35
Y
W
Y
W
SAKS 2
SAKS 2/35
Y
W
Y
W
a r # LR u
13/54/61
13/54/55
12 mm/M 4/5.5 x 1
r # LR u
24/75/73
24/75/66
14 mm/M 4/5.5 x 1
r # LR u
28/80/80.5
28/80/66
13 mm/M 4/5.5 x 1
ri#u
28/80/81.5
28/80/75
12 mm/M 4/5.5 x 1
500 V/10 A/10 mm2
6 kV/3
400 V**/16 A/10 mm2
6 kV/3
400 V/63 A***/16 mm2
6 kV/3
500 V/10 (25) A***/10 mm2
6 kV/3
1.2…2.4
4
1.2…2.4
4
1.2…2.4
4
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B6
(QL 2…5) 47
(QL 6…10) 36
0.5…16
1.5…10
0.5…10
0.5…10
B6
(QL 2…5) 47
(QL 6…10) 36
1.5…16
1.5…16
1.5…16
1.5…16
B7
(QL 2…5) 47
(QL 6…10) 36
0.5…16
0.5…10
0.5…10
0.5…10
B6
(QL 2…5) 47
(QL 6…10) 36
UL
CSA
Version
300 V/10 A/22…10 AWG
600 V/10 A/22…10 AWG
Y
Qty. W
Qty.
600 V/30 A/22…8 AWG
Y
Qty. W
Qty.
600 V/63 A/14…6 AWG
Y
Qty. W
Qty.
600 V/25 A/22…8 AWG
Y
Qty. W
Qty.
KrG
KrG
02489200003) 20 06675200003)20
0321320000 20 0501820000 20
0359420000 20 0502120000 20
0206820000 20 1368720000 20
Neozed D 01
Type
Cat. No.
Qty.
TW HP (2.0) 0607000000* 20
Neozed D 02
Type
Cat. No.
Qty.
TW HP (2.0) 0607000000*20
Diazed E 16
Type
Cat. No.
Qty.
TW HP (2.0) 0607000000*20
QL
QL
QL
QL
QL
QL
QL
QL
QL
QL
QL
QL
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data/feed through-terminal base
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
SAKS 5
SAKS 5/35
End plate/partition (thickness mm)
PA
HP
02975200004) 20 03289200004)20
Type
AP (2.5)
for Y
TW (2.0)
Cat. No.
Qty.
0191320000
0607000000
Cross-connection
QL
0328000000
0328100000
0328200000
0339000000
20
20
20
20
2
3
4
10
0207800000
0207900000
0208000000
0338900000
20
20
20
20
2
3
4
10
0207800000
0207900000
0208000000
0338900000
20
20
20
20
SS
Fixing screws for cross-connections
Fuse inserts
1 1/4" x 1/4"
2
3
4
10
SS M 4
0136400000100
BS M 4x9
0103300000100
Gauge ring
Amp.Colour Cat. No.
Qty.
P 14/2 pink
0138000000 50
P 14/4brrown 0138100000 50
P 14/6green
0328600000 50
P14/10 red
0328700000 50
SS M 4
0136400000 100
BS M 4x9
0103300000 100
Gauge ring
Amp. Colour Cat. No.
Qty.
P 18/20 Blue 0361800000
P 18/25 yellow0361900000
P 18/35 black 0362000000
P 18/50 white 0362100000
50
50
50
50
Rated voltage 400 V
E 14/2
0137400000
E 14/4
0137500000
E 14/6
0328300000
E 14/10 0328400000
E 14/16 0328500000
10
10
10
10
10
Rated voltage 400 V
E 18/20
0361300000
E 18/25
0361400000
E 18/35
0361500000
E 18/50
0361600000
E 18/63
0361700000
10
10
10
10
10
SK (5 x 30) 0282000000 20
SK (1/4”x 11/4 ) 0428900000 20
SK
0339410000
20
SK
0359310000 20
SK
0284110000 20
DEK 5
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Fuse insert
Nominal current (A): 0.5
1.0
2.0
3.0
5.0
7.0
10.0
fast
fast
fast
fast
fast
fast
fast
E
E
E
E
E
E
E
0.5 A
1A
2A
3A
5A
7A
10 A
0533800000
0525500000
0294500000
0295700000
0294600000
0295800000
0293900000
G fuse inserts 5 x 30 mm
(500 V~/0.032…6.3 A).
Available from Wickmann-Werke GmbH,
Annastr. 113, 58453 Witten, Germany, Phone ++492302/6620
D fuse inserts
SS M 4
0136400000 100
BS M 4x9
0103300000 100
Gauge ring
Amp. Colour Cat. No.
Qty.
P 16/10 red 0208900000 100
P 16/16 grey 0209000000 100
P 16/20 Blue 0209100000 100
Rated voltage 500 V
E 10 A
0208500000
E 16 A
0208600000
E 20 A
0208700000
E 25 A
0208800000
25
25
25
25
Screw cap (spare)
Marking tags
DEK
red
black
Print
Standard
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
*only for TS 32
142
** Also for 440 V~ with neozed marina fuse
*** Current for overload up to 10 A, for short circuit up to 25 A
3)
4)
For fuse inserts 1 1/4 x 1/4” DEF 63
For fuse inserts 5 x 30
Fuse terminals
SAKS 4 USA
Fuse terminals
with fault indicator
ASK 1 LD
KDKS 1
Fuse insert 5 x 20
AC model
Y
W
ar
24/75/73
24/75/66
14 mm/M 4/5.5 x 1
mm2
Dimensions/approvals
Terminal width (+ 0.2 assembly tolerance)
mm
Insulation stripping length
mm
Connection data
Screw connection, solid
Screw connection, flexible/ferrule with/without plastic collar
Conductor cross-section
1.2…2.4
4
0.5…16
1.5…10
0.5…10
0.5…10
B6
(QL 2…5) 47
(QL 6…10) 36
600 V/30 A/20…8 AWG
600 V/30 A/22…8 AWG
Y
Qty. W
Qty.
0162220000 20 0178220000 20
VDE rated data
Current
Voltage
LED-current (24…60 V)
LED-current (115…230 V)
LED-current (24…230 V)
Incandescent lamp-current
Neon lamp-current
Cross-section
Ordering data
10.3 x 38,1
Type
Cat. No.
Qty.
TW HP (2.0) 0607000000*20
QL
QL
QL
QL
2
3
4
10
0328000000
0328100000
0328200000
0339000000
20
20
20
20
ar
8
9
8
9
0.5…4 mm2
0.5…4 mm2
AWG 22…12
0.5…4 mm2
0.5…4 mm2
AWG 22…12
6.3 A
24…230 V (depending on terminal)
≤ 2 mA
≤ 2 mA
6.3 A
24…230 V (depending on terminal)
≤ 2 mA
24
24
48
60
115
230
V–
V–
V–
V–
V–
V–
4 mm2
Type
ASK 1 LD
ASK 1 LD
ASK 1 LD
ASK 1 LD
ASK 1 LD
ASK 1 LD
24
48
60
115
230
V~
V~
V~
V~
V~
ASK
ASK
ASK
ASK
ASK
SS M 4
0136400000 100
BS M 4 x 9 0103300000 100
Accessories
Mounting rail
End brackets (thickness mm)
Warning:
In the event of a faulty fuse,
the connection system is live!
for TS 32 Y
for TS 35 W
End plate/End plate (thickness mm)
Cross-connections
Type ‘QL’
Cross-connection
Type ‘QB’
1
1
1
1
1
LD
LD
LD
LD
LD
Cat. No.
Qty.
8050810000 25
0222760000 25
0225260000 25
0226460000 25
0225460000 25
0225660000 25
0222860000
0225360000
0226360000
0225560000
0225760000
25
25
25
25
25
4 mm2
Type
Cat. No.
KDKS 1
8146450000 25
KDKS 1
KDKS 1
8148930000 25
8148920000 25
KDKS 1
KDKS 1
8142840000 25
8148910000 25
Qty.
Mountable on
TS 32 and TS 35
Mountable on
TS 32 and TS 35
TS 32
TS 35x7.5
TS 35x15
EWK 1
EW 35
AP PA (1.5)
0122800000
0383400000
0498000000
0206160000 50
0383560000 50
0380360000 20
TS 32
TS 35x7.5
TS 35x15
0122800000
0383400000
0498000000
EW 35
0383560000 50
QB 21)
QB 31)
QB 41)
0461100000100
0461200000 50
0461300000 50
QB
QB
QB
QB
QB
0461100000 100
0461200000 50
0461300000 50
0545400000
0545300000
TH (spare)
0377060000 100
straight
angled
21)
31)
41)
581)
581)
Fixing screw (fits QL)
Disconnect lever (spare)
SK (w. spring) 0161730000 20
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1)When
using QB, the rated cross-current reduces to max. 2.5 mm2
143
SAK-series
400 V/30 A/10
6 kV/3
DC model
Warning:
In the event of a faulty fuse,
the connection system is live!
Fuse terminals
with fault indicator
SAKS 1
SAKS 4
SAKS 6
SAKS 7
Fuse insert 5 x 20/5 x 25
Fuse insert E14/D 01
Fuse insert 11/4“ x 1/4“
Fuse insert 5 x 20/5 x 25
(e.g. Neozed D 01)
acc. to DEF 63
Warning:
In the event of a faulty fuse,
the connection system is live!
Warning:
In the event of a faulty fuse,
the connection system is live!
Warning:
In the event of a faulty fuse,
the connection system is live!
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Terminal width (+ 0.2 assembly tolerance)
mm
Insulation stripping length/clamping screw/screwdriver blade
Connection data
Screw connection, solid
Screw connection, flexible
Conductor cross-section
Further technical data
Tightening torque range
Torque setting with electric screwdriver type DMS 2
VDE rated data
Voltage/current
LED-current (24…60 V)
LED-current (115…230 V)
Incandescent lamp-current
Neon lamp-current
Cross-section
Ordering data
Fuse insert
5 x 20
LED
Acc. to IEC 60127-2 (VDE 0820 T.2 Bl 1)
without indicator
Nm
ar
24 V–
24 V~
48 V–
48 V~
13
12
24
14
12
12
12
12
0.5…16 mm2
0.5…10 mm2
AWG 20…8
0.5…16 mm2
0.5…10 mm2
AWG 20…7
0.5…16 mm2
0.5…10 mm2
AWG 20…8
0.5…16 mm2
0.5…10 mm2
AWG 20…8
1.2…2.4
4
1.2…2.4
4
1.2…2.4
4
1.2…2.4
4
–/10 A
≤ 5 mA
–/16 A
500 V~/10 A
10 A
≤ 1 mA
500 V~/10 A
10 A
≤ 1 mA
≤ 1 mA
10 mm2
≤ 1 mA
10 mm2
≤ 1 mA
10 mm2
Type
Cat. No.
Qty.
SAKS 6 KrG 0531820000 40
for 11/4“ x 1/4“ acc. to DEF 63
exchangable neon lamps
(please order separately)
Type
Cat. No.
Qty.
SAKS 7 KrG
for 5 x 25
0576120000 40
SAKS 7 KrG
for 5 x 20
0573120000 40
exchangable neon lamps
(please order separately)
Type
TS 32
Type
TS 32
Y
Qty. W
Qty.
SAKS 1 LD
0371420000 10 0225820000 10
1111220000 10 1111320000 10
0371420000 10 0214020000 10
Type
SAKS 4
TS 32 Neon
Voltage
115 V0
480 V0
Cat. No.
Qty.
lamp
0101820000 10
0102120000 10
SAKS 1 GL
Incandescent lamp
24 V0
48 V0
ar
ar
≤ 50 mA
≤ 0.5 mA
10 mm2
Voltage
Warning:
In the event of a faulty fuse,
the connection system is live!
0173220000 10
0378920000 10
SAKS 1 GL
Neon lamp
Fuse insert
5 x 25
Acc. to DIN 41576
without indicator
115 V0
230 V0
LED
24 V–
Incandescent lamp
48 V0
0385320000 10 8068330000 10
0306120000 10 0199920000 10
SAK 1 LD
on demand
SAKS GL
on demand
SAKS 1 GL
Neon lamp
115 V0
230 V0
Accessories
Mounting rail
End brackets (thickness mm)
End plate (thickness mm)
Cross-connection
Type ‘QL’
Cross-connection
Type ‘QB’
Fixing screw (fits QL)
Screw cap (spare)
Neon lamp
144
for TS 32 Y
for TS 35 W
0309320000 10 0198620000 10
Type
TS 32
TS 35x7.5
TS 35x15
EWK 1 (8.5)
EW 35 (8.5)
AP KrG (3)
Cat. No.
Qty.
0122800000
0383400000
0498000000
0206160000 50
0383560000 50
0191320000 20
SK (5 x 20)
SK (5 x 25)
0282100000 20
0282000000 100
Type
TS 32
Cat. No.
Qty.
0122800000
EWK 1 (8.5) 0206160000 50
Cat. No.
Qty.
0122800000
Cat. No.
Qty.
0122800000
EWK 1 (8.5) 0206160000 50
EWK 1 (8.5) 0206160000 50
AP KrG
0146720000 20
QL 2
0191400000 50
QL 3
0191500000 50
QL 4
0191600000 20
QL 10
0338800000 20
BSM 3x6 m.SS 0346200000 100
AP KrG (3) 0146720000 20
QL 2
0207800000 20
QL 3
0207900000 20
QL 4
0208000000 20
QL 10
0338900000 20
BSM 4x9 m.SS 0133300000 100
Neon lamp 230 V~
0550300000
Neon lamp 115 V~
0550200000
Neon lamp 230 V~
0550300000
Neon lamp 115 V~
0550200000
Fuse inserts and gauge rings for Weidmüller fuse terminals
Fuse inserts
for terminal type
SAKS 1
SAKS 7
ASK 1
WSI 6
Rated voltage (V) Rated current (A)
Size (mm)
Type
G fuse inserts 5 x 20 without indicator acc. to IEC 60127-2 (VDE 0820 T.2 Bl 1)
Cat. No.
Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
0.1
0.2
0.25
0.5
0.63
(F)
(F)
(F)
(F)
(F)
G
G
G
G
G
20/0.10A/F
20/0.20A/F
20/0.25A/F
20/0.50A/F
20/0.63A/F
1.0
1.6
2.0
2.5
3.15
4.0
5.0
6.3
(F)
(F)
(F)
(F)
(F)
(F)
(F)
(F)
G
G
G
G
G
G
G
G
20/1.00A/F
20/1.60A/F
20/2.00A/F
20/2.50A/F
20/3.15A/F
20/4.00A/F
20/5.00A/F
20/6.30A/F
0430300000
0430400000
0430500000
0430600000
0439000000
0430700000
0430800000
0430900000
0431000000
0431100000
0431200000
0431300000
0431400000
5 x 25 m. K.1)
Breaking capacity 80 A
(at 250 V, 50 Hz, cos : = 1)
0.25
(M)
0.5
(M)
0.8
(M)
250
1
(M)
10
(M)5)
2
(F)
4
(F)
6.3
(F)
Fuse inserts 11/4“ x 1/4“ without indicator acc. to BS 88
(M) = mittelträge (F) = fast
33 kA Breaking capacity 33 kA fast
G
G
G
G
G
G
G
G
25/0.25A/M
25/0.50A/M
25/0.80A/M
25/1.00A/M
25/10.0A/M
25/2.00A/F
25/4.00A/F
25/6.30A/F
0546900000
0510300000
0646400000
0265800000
0193100000
0192700000
0192800000
0192900000
10
10
10
10
10
10
10
10
E 0.5 A
0.5
E 1 A
1
440
E 2 A
2
E 3 A
3
E 5 A
5
E 7 A
7
E 10 A
10
D fuse inserts E 16 with indicator acc. to DIN 49360 (diazed)
GZ
GZ
GZ
GZ
GZ
GZ
GZ
0533800000
0525500000
0294500000
0295700000
0294600000
0295800000
0293900000
10
10
10
10
10
10
10
5 x 20
Breaking capacity 1500 A
(at 250 V, 50 Hz, cos : 0.7)
250
SAKS 32)
SAKS 6
0.5A/F
1.0A/F
2.0A
3.0A
5.0A
7.0A
10.0A
SAKS 2
E 10 A
10
E 16/10A RT
500
E 16 A
16
E 16/16A GR
E 20 A
20
E 16/20A BL
E 25 A
25
E 16/25A GE
D fuse inserts E 14 Size D 01 and E 18 size D 02 with indicator acc. to DIN 49522 (neozed)3)
0208500000
0208600000
0208700000
0208800000
25
25
25
25
SAKS 44)
E
E
E
E
E
E
E
E
E
E
0137400000
0137500000
0328300000
0328400000
0328500000
0361300000
0361400000
0361500000
0361600000
0361700000
10
10
10
10
10
10
10
10
10
10
SAKS 5
14/2
14/4
14/6
14/10
14/16
18/20
18/25
18/35
18/50
18/63
Note:
400
400
2
E 14/2A RS
4
E 14/4A BR
6
E 14/6A GN
10
E 14/10A RT
16
E 14/16A GR
20
E 18/20A BL
25
E 18/25A GE
35
E 18/35A SW
50
E 18/50A WS
63
E 18/63A KU
(F) = fast
(M) = miedium-delayed action
SAK-series
G fuse inserts 5 x 25 with indicator acc. to DIN 415761)
SAKS 1
SAKS 7
WSI 6
1)
The SIBA company also supplies 5 x 25 G fuse inserts with indicators in a shipbuilding model for 450 V AC.
5 x 30 (500 V AC) fuse inserts for SAKS 3 are available from the WICKMANN company
3) The LINDNER company also supplies neozed fuse cartridges in an additional shipbuilding mode for 440 V AC.
4) Fuse cartridges with the dimensions 1"x 1/4" c 25.4x6.35 mm and 13/32"x11/2" c 10.3x38.1 mm ar not included in product line.
5) Only for SAKS 1 and SAKS 7.
2)
Gauge rings
For terminal type
SAKS 4 and 4/35
Gauge ring type
P 14/2
P 14/4
P 14/6
P 14/1
Amp.
2
4
6
10
Colour
Pink
Brown
Green
Red
Type
P 14/2D01 RS
P 14/4D01 BR
P 14/6D01 GN
P 14/10D01 RT
Cat. No.
0138000000
0138100000
0328600000
0328700000
Qty.
50
50
50
50
SAKS 5 and 5/35
P
P
P
P
18/20
18/25
18/35
18/50
20
25
35
50
Blue
Yellow
Black
White
P
P
P
P
0361800000
0361900000
0362000000
0362100000
50
50
50
50
SAKS 2 and 2/35
P 16/10
P 16/16
P 16/20
10
16
20
Red
Grey
Blue
P 16/10 RT
P 16/16 GR
P 16/20 BL
0208900000
0209000000
0209100000
100
100
100
18/20D02
18/25D02
18/35D02
18/50D02
BL
GE
SW
WS
145
Disconnect test terminals
SAKR
SAKR/35
SAKR-D
DKT 4
DKT 4/35
SAKR-D/35
DKT 4 V
DKT 4 V/35
DLS 2
Y
W
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
With/without plastic insulating collar
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
With 2 StB5)
With 2 StB5)
With 2 StB5)
With 2 StB5)
End plate (thickness mm)
UL
CSA
Type
KrG
PA
Without diode PA
With diode PA
Blue PA
Orange PA
KrG
PA
without diode PA
Blue
KrG
PA
Blue PA
Y
W
Y
W
Y
W
ar#
6.5/42/40.5/54.5 (opened)
6.5/46/38/52
8 mm/M 3/3.5 x 0.6
6.5/42/40.5/57 (with DLS 2)
6.5/46/38/54.5
8 mm/M 3/3.5 x 0.6
ar#
6/65/56.5/70 (opened)
6/65/56.5/70
9 mm/M 3/3.5 x 0.6
6/65/56.5/70 (opened)
6/65/56.5/70
9 mm/M 3/3.5 x 0.6
400 V6)/10 A/4 mm2
6 kV/3
400 V/10 A/4 mm2
6 kV/3
400V/10 A/4 mm2
6 kV/3
400 V/10 A/4 mm2
6 kV/3
0.5…1.0/0.5 StB
2/1
0.5…1.0/0.5 StB
2/1
0.5…1.0/0.5 StB
2/1
0.5…1.0/0.5 StB
2/1
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
0.5…4
A3
(QB 2…25) 10
0.5…4
A3
(QB 2…25) 10
0.5…4
A3
(QB 2…4) 10
0.5…4
A3
(QB 2…4) 10
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
300 V/10 A/26…12 AWG
300 V/10 A/22…12 AWG
Y
Qty. W
Qty.
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
04129600001)100 02999600001)50
0687360000 50 0687460000 50
0412120000100
0412160000100 0172160000100
04130600002)50 01857600002)50
02636600003)50 02995600003)50
0412180000100 0172180000100
1461960000100
0412220000100
0412260000100 0183360000100
05464600001) 100
0327860000 50 0327960000 50
1304860000 50 1304960000 50
04131600002) 50
0412280000100 0183380000100
Type
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
Qty.
0211320000 20
0211360000 20
0211380000 20
Type
Cat. No.
AP (1.5)
Qty.
0211360000 20
Type
AP (1.5)
Cat. No.
Qty.
0687560000 20
Type
AP (1.5)
Cat. No.
Qty.
0687560000 20
Partition (thickness mm)
Cross-connection
QB 4
2-pole
3-pole
4-pole
25-pole
TW HP (1.0) 0297100000 20
TW HP (1.0) 0297100000 20
TW HP (2.0) 0607000000 20
TW HP (2.0) 0607000000 20
QB 24)
0482700000 100
QB 34)
0482800000 50
QB 44)
0482900000 50
QB 25 blank4) 0134000000 20
QB 24)
QB 34)
QB 44)
QB 25blank4)
0482700000100
0482800000 50
0482900000 50
0134000000 20
QB 24)
QB 34)
QB 44)
0482700000 100
0482800000 50
0482900000 50
QB 24)
QB 34)
QB 44)
0482700000 100
0482800000 50
0482900000 50
PS 2.3
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
DEK 6
see “Accessories”
DEK 6
see “Accessories”
Contact sleeve (spare)
Test plug
Diode plug (spare)
without diode
with diode 1N4007
with diode 1N4007
with jumper
Marking tags
0180400000 20
DLS
DLS
DLS
DLS
DEK
Print
Standard
DEK 6.5
see “Accessories”
2
0321060000 50
2 ) 0630160000 50
2 ( 0547760000 50
2
0547660000 25
DEK 6.5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1)
2)
without DLS
with DLS empty
146
3)
with DLS 1N4007
4)
When using QB the rated cross-current reduces to max. 2.5 mm2
5)
6)
With DKT 4 only on upper terminal level
As disconnect test terminal rated voltage 250 V
Disconnect test terminals
ASK 1
ASK 1/35
Y
W
ar#
8/58/49
8/58/44
9 mm/M 3/3.5 x 0.6
500 V/19 A/4 mm2
6 kV/3
0.5…1.0
2
SAK-series
0.5…4
1.5…4
0.5…4
0.5…4
A3
(QB 2…4) 10
300 V/15 A/12 max. AWG
300 V/6.3 A/26…12 AWG
Y + W Qty.
0456360000 100
0105260000 100
Type
AP (1.5)
Cat. No.
Qty.
0380360000 20
TW HP (2.0) 0607000000 20
QB 24)
0461100000 100
QB 34)
0461200000 50
QB 44)
0461300000 50
multipole interruptable with
group marking carrier SchS 2;
2-pole (Cat. No. 1359500000)
1000 mm (Cat. No. 0337400000)
K sleeve
0553300000 100
DEK 5 FW
see “Accessories”
147
Feed-through terminals with tab connection
AST 1
AST1/35
AST 3
AST 3/35
AST 4
AST 4/35
AST 5
AST 5/35
6.3
2.8
6.3
2.8
6.3
2.8
6.3
2.8
Y
W
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section for clamping yokes
Rated cross-section tab
6.3/2.8 mm
Rated Voltage VDE 0110/1.89/pollution severty
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
Slotted KrG
Slotted blue KrG
Slotted PA
Unslotted KrG
Unslotted blue KrG
Unslotted PA
End plate/partition/small partition (thickness mm)
AP
TW
TSCH 1
KrG
Blue KrG
PA
PA
HP
HP
Only for PA
Cross-connection
Q4
2-pole
3-pole
4-pole
10-pole
25-pole
Y
W
Y
W
Y
W
a r # u DNV
6.5/58/53.5
6.5/58/46
a r # DNV
6.5/40/47.5
6.5/44/40
ar#
6.5/40/47.5
6.5/44/40
9 mm/M 2.5/3.5 x 0.6
a r # DNV
6.5/58/53.5
6.5/58/46
12 mm/M 3/3.5 x 0.6
500 V1)/2.5/1.0 mm2
6 kV/3
500 V1)/2.5/1.0 mm2
6 kV/3
500 V1)/2.5 mm2
2.5/1.0 mm2
6 kV/3
500 V1)/4 mm2
2.5/1.0 mm2
6 kV/3
0.4…0.7
1
0.5…1.0
2
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
A3
0.5…6
1.5…4
0.5…4
0.5…4
A4
(QL 2…10) 20
(QL 2…10) 20
(QL 2…10) 20
(QL 2…10) 20
300 V/13 A/–
300 V/16 A/–
Y
Qty. W
0478220000 50
300 V/13 A/–
300 V/16 A/–
Y
Qty. W
0442420000 100
0442470000 100
300 V/13 A/22…12 AWG
300 V/16 A/24…12 AWG
Y
Qty. W
Qty.
0439120000 100
300 V/13 A/22…12 AWG
300 V/16 A/24…12 AWG
Y
Qty. W
Qty.
0479220000 50
0460460000 100
0479260000 50 0664960000 50
Qty.
04782600002)50 06996600002)50
Qty.
04603600002) 100
0266320000 50
0298020000 100
02663600002)50 06648600002)50
02367600002)100 04793600002)10
Type
AP (3.0)
Cat. No.
Qty.
0266420000 20
Type
AP (3.0)
Cat. No.
Qty.
0298120000 20
Type
AP (3.0)
Cat. No.
Qty.
0298120000 20
Type
AP (3.0)
Cat. No.
Qty.
0266420000 20
AP (1.5)
0266460000 20
AP (1.5)
TW (1.5)
TW (1.0)
0460560000 20
0130160000 20
0297100000 20
0266460000 20
0474700000 20
0607000000 20
0319160000 100
0460560000 20
0130160000 20
0297100000 20
AP (1.5)
TW (0.5)
TW (2.0)
TSch 1
AP (1.5)
TW (1.5)
TW (1.0)
TSch 1
0319160000 100
TSch 1
0319160000 100
TW (1.0)
TW (2.0)
TSch 1
0474700000 20
0607000000 20
0319160000 100
Q
Q
Q
Q
0336700000
0336800000
0336900000
0368800000
Q
Q
Q
Q
0336700000
0336800000
0336900000
0368800000
Q
Q
Q
Q
0336700000
0336800000
0336900000
0368800000
Q
Q
Q
Q
0336700000
0336800000
0336900000
0368800000
2
3
4
10
50
50
50
20
2
3
4
10
0321220000 100
0321270000 100
50
50
50
20
0334520000 50
0479460000 100
2
3
4
10
50
50
50
20
0334560000 50 0699760000 50
2
3
4
10
50
50
50
20
Plug adapter
Clips into PA version
of AST 3 and AST 4 only
2-pole
3-pole
4-pole
5-pole
8-pole
STA
STA
STA
STA
STA
2.5/2
2.5/3
2.5/4
2.5/5
2.5/8
0165860000 100
0165960000 50
0190360000 50
0166060000 50
0166160000 50
STA
STA
STA
STA
STA
2.5/2
2.5/3
2.5/4
2.5/5
2.5/8
0165860000 100
0165960000 50
0190360000 50
0166060000 50
0166160000 50
Test plug/socket
Plug-test socket without using QL for TS 32
PS
StB
StB 14
0168600000 50
StB 14
0168600000 50
StB 14
0168600000 50
StB 14
0168600000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
IH 6.3
0386060000 100
0386260000 100
DEK 6.5
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6.5
see “Accessories”
Insulation sleeve
Marking tags
DEK
Print
Standard
Mounting rails, end brackets, further marking material see “Accessories”
1)
2)
148
with insulation sleeve
shock proof with ADP 4 cover profiles ADP4 (see section “Accessories”)
Feed-through terminals with tab connection
SAK 4 S
SAK 4 S/35
SAK 4 SS
SAK 4 SS/35
SAKR F
SAKR F/35
6.3
2.8
6.3
2.8
2.8
Y
W
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
Slotted KrG
Slotted blue KrG
Slotted PA
Unslotted KrG
End plate/partition/small partition (thickness mm)
AP
TW
TSch 1
KrG
Blue KrG
PA
PA
HP
T
Cross-connection
QL
BS M 3 x 4.5
QB 4
2-pole
3-pole
4-pole
10-pole
25-pole
BS M 3 x 24
ar#u
6.5/40/51.5
6.5/40/49.5
12 mm/M 3/3.5 x 0.6
ar#u
6.5/40/51.5
6.5/40/49.5
ar#
6.5/42/40.5/54.5 (opened)
6.5/42/40.5/32.5
8 mm/M 3/3.5 x 0.6
500 V1)/16 A
4 mm2
2.5/1.0 mm2
6 kV/3
500 V1)/16 A
250 V1)/10 A
4 mm2
-/1.0 mm2
6 kV/3
-
2.5/1.0 mm2
6 kV/3
0.5…1.0
2
0.5…1.0
1
0.33…6
1.5…4
0.5…4
0.5…4
A4
0.5…4
1.5…4
0.5…4
0.5…2.5
A3
SAK-series
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section for clamping yokes
Rated cross-section tab
6.3/2.8 mm
Rated Voltage VDE 0110/1.89/pollution severty
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2 pole
A
Continuous current rating of cross-connection multipole
A
Y
W
Y
W
(QL 2…10) 36 A at 6 mm2
(QL 2…10) 36 A at 6 mm2
(QB 2…25) 10
300 V/13 A/26…12 AWG
300 V/13 A/26…12 AWG
Y
Qty. W
Qty.
0401220000 100
300 V/13 A/18…14 AWG
300 V/13 A/18…14 AWG
Y
Qty. W
Qty.
0479620000 10
300 V/10 A/22…12 AWG
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
0401260000100 0630360000100
0479660000100 0630460000100
06636600001006382870000100
0352920000 10
with 1 StB 6
Type
AP (1.5)
Cat. No.
Qty.
0117920000 20
AP (1.5)
AP (1.5)
TW (1.0)
QL
QL
QL
QL
2
3
4
10
0117960000 20
0130160000 20
0297100000 20
Type
AP (1.5)
AP (1.5)
AP (1.5)
TW (1.5)
TW (1.0)
Cat. No.
Qty.
0117920000 20
0117970000 20
0117960000 20
0130160000 20
0297100000 20
0130600000 100
0130700000 100
0130800000 50
0338200000 20
QL
QL
QL
QL
0130600000 100
0130700000 100
0130800000 50
0338200000 20
2
3
4
10
Type
Cat. No.
Qty.
AP (1.5)
0211360000 20
TW (1.0)
0297100000 20
QB 2*
QB 3*
QB 4*
0482700000 100
0482800000 50
0482900000 50
QB 25 blank* 0134000000 20
BS M 3x4.5 1593210000 100
BS M 3x4.5 1593210000 100
Test plug/socket
PS
PS 2.3
0180400000 20
Insulation sleeve
Marking tags
DEK
Print
Standard
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
0386060000 200
DEK 6.5
see “Accessories”
DEK 6.5
see “Accessories”
DEK 6.5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1)
With insulation sleeve
*The conductor cross-section for the screw connection is reduced to
2.5 mm2 when QB is used
149
Feed-through terminals with tab connection
DK 4 SS/35
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/-current
Rated cross-section for clamping yokes
Rated cross-section tab
6.3/2.8 mm
Rated Voltage VDE 0110/1.89/pollution severty
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
With/without plastic insulation collar
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2 pole
A
Continuous current rating of cross-connection multipole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Version
PA
End plate (thickness mm)
PA
DK 4 SS/35
a r # LR u
only 2.8
a r # LR u
6/54/60.5
6/54/60.5
400 V1)/2 x 16 A
400 V1)/2x10
-
-
2.5/1.0 mm2
8 kV/3
1.0 mm2
4 kV/3
DK 4 S
DK 4 S/35
DK 4 S only 2.8
DK 4 S/35 only 2.8
Y
Y
ar#u
6/54/59.5
6/54/60.5
9 mm/M 3/3.5 x 0.6
ar#
6/54/59.5
6/54/60.5
9 mm/M 3/3.5 x 0.6
400 V1)/2 x 10
4 mm2
1.0 mm2
6 kV/3
400 V1)/2 x 10
4 mm2
1.0 mm2
6 kV/3
0.5…1.0
2
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
A3
A3
(QL 2…10) 20
(QL 2…10) 20
(QL 2…10) 20
(QL 2…10) 20
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
W
Cat. No.
Qty.
0217160000 100
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
W
Cat. No.
Qty.
0297060000 100
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
Y
Qty. W
Qty.
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
Y
Qty. W
Qty.
0631260000100 0686660000100
0631160000 100 0686560000 100
Type
AP (1.5)
Type
AP (1.5)
Type
AP (1.5)
Type
AP (1.5)
Cat. No.
Qty.
0631360000 20
Cat. No.
Qty.
0631360000 20
Cat. No.
0631360000
Qty.
20
Cat. No.
Qty.
0631360000 20
Partition
for TS 32 HP
TW HP (2.0) 0607000000 20
TW HP (2.0) 0607000000 20
Small partition
TSch 6
Cross-connection
Q3
2-pole
3-pole
4-pole
10-pole
TSch 6
0190260000 100
TSch 6
0190260000 100
TSch 6
0190260000 100
TSch 6
0190260000 100
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
Test plug/socket
Plug test socket without using QL
Plug test socket for use with QL
StB
PS
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
0386060000 100
IH 2.8
IH 6.3
0386060000 100
0386260000100
PS 2.3
IH 2.8
0180400000 20
0386060000 100
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
Insulation sleeve
Marking tags
DEK
Print
Standard
Mounting rails, end brackets, further marking material see “Accessories”
1) With insulation sleeve
150
Feed-through terminals for wrap termination
SAK 2.5 T
SAK 2.5 T
SAK 2.5 T
Pin 1 x 1
Pin 0.8 x 1.6
Pin 0.8 x 2.4
Y
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to IEC 60 947-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2-pole
A
Continuous current rating of cross-connection multipole
A
Rated data according to UL/CSA
Voltage/current/conductor size
UL
Voltage/current/conductor size
CSA
Ordering data
Pin
Version
Right
KrG
Horizontal
assembly
Vertical
assembly
Horizontal right
Vertical left
Vertical right
2x vertical
Right
r
6/36.5/47.5/67
12 mm/M 2.5/3.5 x 0.6
r
6/36.5/47.5/62
12 mm/M 2.5/3.5 x 0.6
r
6/36.5/47.5/69
12 mm/M 2.5/3.5 x 0.6
250 V/8 A/2.5 mm2
4 kV/3
250 V/10 A/2.5 mm2
4 kV/3
250 V/10 A/2.5 mm2
4 kV/3
0.4…0.7
1
0.4…0.7
1
0.4…0.7
1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A3
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A3
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A3
(Q 2…10) 24
(Q 2…10) 24
(Q 2…10) 24
300 V/10 A/22…12 AWG
Y
Cat. No.
Qty.
0108520000 100
300 V/10 A/22…12 AWG
Y
Cat. No.
Qty.
300 V/10 A/22…12 AWG
Y
Cat. No.
Qty.
0485920000 100
0478820000 100
0371020000 100
KrG
KrG
KrG
KrG
0485020000 100
PA
End plate (thickness mm)
KrG
PA
Y
Y
SAK-series
DIN 41 611, Part 2 and
for spring-clip termination
DIN 41 611, Part 4
01085600001)100
Type
AP (1.5)
Cat. No.
Qty.
0279520000 20
Type
AP (1.5)
Cat. No.
Qty.
0279520000 20
Type
AP (1.5)
Cat. No.
Qty.
0279520000 20
AP (1.5)
0279560000 20
AP (1.5)
0279560000 20
AP (1.5)
0279560000 20
TW (2.5)
0302820000 20
TW (2.5)
0302820000 20
TW (2.5)
0302820000 20
TW (1.5)
TW (0.5)
TW (2.0)
0302860000 20
0197100000 20
0607000000 20
TW (1.5)
TW (0.5)
TW (2.0)
0302860000 20
0197100000 20
0607000000 20
TW (1.5)
TW (0.5)
TW (2.0)
0302860000 20
0197100000 20
0607000000 20
TSch 1
0319160000 100
TSch 1
0319160000 100
TSch 1
0319160000 100
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Partition (thickness mm)
KrG
PA
HP
HP
Small partition
Cross-connection
2-pole
3-pole
4-pole
10-pole
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2**
3**
4**
10**
50
50
50
20
Test plug/socket
Plug-test socket without using QL
PS
StB
Marking tags
DEK
Print
Standard
StB8.5(ø2.3) 0280600000 50
StB 8.5 (ø 2.3) 0280600000 50
StB8.5(ø2.3) 0280600000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1) Shock-proof with ADP4 cover profile (see section
“Accessories”)
** Not for Type 2 x vertical“
151
Feed-through terminals
Disconnect terminals
for wrap connection
acc. to DIN 41 611, Part 2 and
for spring-clip connection
acc. to DIN 41 611, Part 4
DK 4 T
DK 4 T
DK 4 T
SAKRT
Pin 1 x 1
Pin 0.8 x 1.6
Pin 0.8 x 2.4
Pin 1 x 1/0.8 x 2.4
and 0.8 x 1.6
Y
Y
Dimensions
Width/length/height (mm)
with TS 32 Y
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
Stranded H07V-R
Flexible H07V-K
Flexible H07V-K and ferrule according to DIN 46 228/1
With/without plastic insulating collar
Plug gauge according to IEC 60 947-1
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2-pole
Continuous current rating of cross-connection multipole
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
Pin
Right
Links
Horizontal right
Horizontal
assembly
Vertical
assembly
Vertical right
Vertical right
Vertical
Vertical left
Y
Y
6/50/58.5/75.5
9 mm/M 3/3.5 x 0.6
6/50/60.5/77.5
9 mm/M 3/3.5 x 0.6
6/50/67.5/84.5
9 mm/M 3/3.5 x 0.6
6/42/40.5/54.5
8 mm/M 3/3.5 x 0.6
250 V/8 A/4 mm2
4 kV/3
250 V/10 A/4 mm2
4 kV/3
250 V/10 A/4 mm2
4 kV/3
250 V/6/8 A/4 mm2
4 kV/3
0.5…1.0
1
0.5…1.0
1
0.5…1.0
1
0.5…1.0
2
mm2
mm2
mm2
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
0.5…4
1.5…4
0.5…4
mm2
Size
0.5…4
A3
0.5…4
A3
0.5…4
A3
0.5…4
A3
(Q 2…10) 32
(Q 2…10) 32
(Q 2…10) 32
(QB 2…10) 10
–
–
Y
–
–
Y
–
–
Y
–
–
Y
Cat. No.
1x1
0587460000 100
0.8 x 2.4
0545060000 100
0.8 x 1.6
0469360000 100
Nm
A
A
UL
CSA
Type
PA
PA
PA
Cat. No.
Qty.
0536560000 50
Cat. No.
Qty.
Cat. No.
Qty.
03704600001) 50
03703600001)
PA
Blue PA
PA
PA
05277600001) 50
13984600001) 50
DK 4 QT
bridgeable on
both levels
Right
PA
End plate/partition (thickness mm)
PA
Blue PA
Small partition
TSch 4
Cross-connection/covers
Q3
QB 4
2-pole
3-pole
4-pole
10-pole
Type
Cat. No.
Qty.
AP (1.5)
0359260000 20
AP (DK4 QT) 1397160000 20
Type
AP (1.5)
Cat. No.
Qty.
0359260000 20
Type
AP (1.5)
Cat. No.
Qty.
0359260000 20
Type
AP (1.5)
Cat. No.
Qty.
0211360000 20
AP (1.5)
TW (2.0)
0359280000 20
0607000000 20
AP (1.5)
TW (2.0)
0359280000 20
0607000000 20
TW (2.0)
0607000000 20
TW (2.0)
0607000000 20
TSch 4
0363360000 100
TSch 4
0363360000100
TSch 4
0363360000 100
Q2
Q3
Q4
Q 10
QB 2*
QB 3*
QB 4*
0336400000 50
0336500000 50
0336600000 50
0368600000 20
0482700000 100
0482800000 50
0482900000 50
Q2
Q3
Q4
Q 10
QB 2*
QB 3*
QB 4*
0336400000 50
0336500000 50
0336600000 50
0368600000 20
0482700000 100
0482800000 50
0482900000 50
Q2
Q3
Q4
Q 10
QB 2*
QB 3*
QB 4*
0336400000 50
0336500000 50
0336600000 50
0368600000 20
0482700000 100
0482800000 50
0482900000 50
25-pole
QB 2*
0482700000 100
QB 3*
0482800000 50
QB 4*
0482900000 50
QB 25 blank* 0134000000 20
Test plug/socket
Plug-test socket without using QL
StB 8.5 (ø 2.3) 0215700000 50
StB8.5 (ø2.3) 0215700000 50
StB8.5(ø2.3) 0215700000 50
PS 2.3
PS 2.3
0180400000 20
PS 2.3
0180400000 20
dekafix 6
see “Accessories”
dekafix 6
see “Accessories”
StB
PS
FW/FS
0180400000 20
dekafix 6 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used.
** Only to be used with PA-version
152
Qty.
1)
Shock-proof with ADP4 cover profile (see section
“Accessories”)
Feed-through terminals and disconnect test terminals
with solder connection
SAK 2.5/M.LS
SAK 2.5 L
SAK 2.5 L/35
With screen lug
SAK 2.5 LL
SAK 2.5 LL/35
SAKR L
SAKR L/35
Disconnect terminal
Y
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Type
KrG
Blue KrG
KrS
PA
Blue PA
KrG
r#
6/60/46.5
KrG
Blue KrG
PA
Blue PA
PA
HP
HP
Y
r#
6/55/46.5
6/55/40
12 mm/M 2.5/3.5 x 0.6
r#
6/44.5/46.5
6/44.5/40
12 mm/M 2.5/3.5 x 0.6
ar#
6.5/50/40.5/54.5 (opened)
6.5/50/38/52
8 mm/M 3/3.5 x 0.6
250 V/20 A/2.5/1.5 mm2
4 kV/3
250 V/20 A/2.5/1.5 mm2
4 kV/3
250 V/20 A/1.5 mm2
4 kV/3
250 V/10 A/4/1.5 mm2
4 kV/3
0.4…0.7
1
0.4…0.7
1
0.5…1.0
2/1
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A3
0.5…6
0.5…2.5
0.5…4
0.5…2.5
A3
0.5…4
0.5…4
0.5…4
0.5…4
A3
(Q 2…10) 24
(Q 2…10) 24
(Q 2…10) 24
300 V/10 A/22…12 AWG
Y
Cat. No.
Qty.
0309120000 100
300 V/10 A/22…12 AWG
Y
Qty. W
Qty.
0351420000 100
0351470000 100
300 V/10 A/26…12 AWG
Y
Qty. W
Qty.
0323620000 100
0323670000 100
03514600002)100 04950600002)100
03236600002)10005672600002)100
(QB 2…25) 10
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
Y
Qty.
0412360000 100
0412380000 100
0544120000* 100
PA
Blue PA
End plate/partition (thickness mm)
AP
TW
Y
W
SAK-series
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2-pole
A
Continuous current rating of cross-connection multipole
A
Y
W
0544160000*2)100
Type
AP (1.5)
AP (1.5)
Cat. No.
Qty.
0309220000 20
0309270000 20
0412460000* 100
0412480000* 100
Type
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
Qty.
0309220000 20
0309270000 20
0279560000 20
Type
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
Qty.
0309220000 20
0309270000 20
0279560000 20
TW (1.5)
TW (1.0)
TW (2.0)
0302860000 20
0297100000 20
0607000000 20
TW (1.5)
TW (1.0)
TW (2.0)
0302860000 20
0297100000 20
0607000000 20
TW (1.5)
TW (1.0)
TW (2.0)
0302860000 20
0297100000 20
0607020000 20
TSch 1
0319160000 100
TSch 1
0319160000 100
TSch 1
0319160000 100
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Q
Q
Q
Q
0337000000
0337100000
0337200000
0368700000
Type
Cat. No.
Qty.
AP (1.5)
AP (1.5)
02113600001)20
0211380000 20
TW (2.0)
0607000000 20
QB 2**
QB 3**
QB 4**
0482700000 100
0482800000 50
0482900000 50
Small partition
Cross-connection
Q3
Q4
2-pole
3-pole
4-pole
10-pole
25-pole
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
QB 25 blank** 0134000000 20
Test plug/socket
Plug-test socket without using QL
Plug-test-socket for use with QL
StB
StB8.5(ø2.3)
StB 29.5(ø4)
PS 2.3
PS 4
PS
0280600000
0133400000
0180400000
0299600000
50
50
20
20
StB8.5(ø2.3)
StB 29.5(ø4)
PS 2.3
PS 4
0280600000
0133400000
0180400000
0299600000
50
50
20
20
PS 2.3
0180400000 20
Cover
Marking tags
DEK
Print
Standard
AD 4
0303400000 50
BSK M3 x 22 0128900000 100
AD 4
0303400000 50
BSK M 3x 22 0128900000 100
AD 4
0303400000 50
BSK M 3x 22 0128900000 100
DEK 6
DEK 6
DEK 6
see “Accessories”
see “Accessories”
see “Accessories”
DEK 6.5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* Soldering lug on left-hand side
** The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used.
1)
2)
For TS 32 and TS 35
Contact-proof cross-connection with ADP 4 cover profile (see “Accessories”)
153
Disconnect test terminals with solder connections
SAKR L
SAKR LL
With 2 StB 6
With 2 StB 6
Y
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Type
KrG
Blue KrG
KrS
PA
Blue PA
KrG
KrS
PA
Blue PA
End plate/partition (thickness mm)
AP
TW
W
6.5/50/40.5/54.5 (opened)
r#
6.5/58/40.5/54.5 (opened)
8 mm/M 3/3.5 x 0.6
6.5/58/40.5/54.5 (opened)
–/–/3.5 x 0.6
250 V/10 A/1.5 mm2
4 kV/3
250 V/10 A/4/1.5 mm2
4 kV/3
250 V/10 A/1.5 mm2
4 kV/3
0.5…1.0
1
0.5…4
1.5…4
0.5…4
0.5…4
A3
(QB 2…25) 10
Y
Qty. W
Qty.
0518160000*100 0183560000 100
300 V/10 A/22…12 AWG
Y
Qty.
Y
0464460000 100
Qty. W
Qty.
0294260000
100
0572660000 100
Qty.
Type
AP (1.5)
Cat. No.
Qty.
0211320000 20
Type
AP (1.5)
Cat. No.
Qty.
0211320000 20
AP (1.5)
AP (1.5)
0211360000 20
0211380000 20
AP (1.5)
AP (1.5)
0211360000 20
0211380000 20
AP (1.5)
AP (1.5)
0211360000 20
0211380000 20
TW (0.5)
TW (2.0)
0474700000 20
0607000000 20
TW (0.5)
TW (2.0)
0474700000 20
0607000000 20
TW (0.5)
TW (2.0)
0474700000 20
0607000000 20
QB 2**
QB 3**
QB 4**
0482700000 100
0482800000 50
0482900000 50
PS 2.3
0180400000 20
DEK 6.5
see “Accessories”
Type
KrG
Blue KrG
PA
Blue PA
PA
HP
HP
Y
Y
W
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46228/1
With/without plastic insulating collar
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2 pole
A
Continuous current rating of cross-connection multipole
A
SAKR LL
Cat. No.
Small partition
Cross-connection
QB 3
QB 4
2-pole
3-pole
4-pole
10-pole
25-pole
QB 25 blank** 0134000000 20
Test plug/socket
PS
Marking tags
DEK
Print
Standard
PS 2.3
0180400000 20
DEK 6.5
see “Accessories”
DEK 6.5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* Soldering lug on left-hand side
** The conductor cross-section for the screw connection is reduced to 2.5 mm2 when QB is used.
154
Disconnect test terminals with solder connections
TAL
TAL
SAKK 4
2 solder connections
4 solder connections
Ceramic feed-through terminals for use in high temperature
ranges up to max. 210°C
Dimensions/approvals
Width/length/height (mm)
with TS 32 Y
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46 228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal block for conductor size
Continuous current rating of cross-connection 2 pole
A
Continuous current rating of cross-connection multipole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Type
KrG
Blue KrG
KrS
PA
Blue PA
KrG
KrS
PA
Blue PA
Ceramic
End plate/partition (thickness mm)
AP
TW
4/48/36/50 (opened)
4/54/36/50 (opened)
63 V/10 A/1.5 mm2
1.5 kV/3
Y
Cat. No.
63 V/10 A/1.5 mm2
1.5 kV/3
Qty.
Y
0212060000 100
Type
KrG
Blue KrG
PA
Blue PA
PA
Y
AP (1.5)
Cat. No.
Qty.
0212260000 20
Cat. No.
Qty.
8/40/53
11.5/40/53
12 mm/M3/3.5 x 0.6
IEC 60 947-7-1
800 V/32 A/4 mm2
12 mm/M 4/5.5 x 1.0
IEC 60 947-7-1
800 V/57 A/10 mm2
0.5…1
1.2…2
0.5...6 mm2
0.5...4 mm2
2.5...16 mm2
2.5...10 mm2
A4
35 A/6 mm2
36
36
B6
63 A/16 mm2
47
36
Y
Cat. No.
Qty.
Y
SAK-series
Y
SAKK 10
Cat. No.
Qty.
0304960000 100
Type
AP (1.5)
Cat. No.
Qty.
SAKK 4
1598080000 50
Type
Cat. No.
Qty.
AP/SAKK4/10 9502630000 10
SAKK 10
1598090000 50
Type
Cat. No.
Qty.
AP/SAKK4/10 9502630000 10
Type
QL 2
QL 3
QL 4
QL 10
VH 13.5
BS (M 3 X 20)
Cat. No.
Qty.
9509420000 100
9509430000 100
9509440000 50
9509450000 20
0248500000 100
0303000000 100
Type
QL 2
QL 3
QL 4
QL 10
VH 12.5
BS (M3 X 20)
Cat. No.
Qty.
9509470000 100
9509480000 50
9509490000 50
9509500000 20
9509510000 50
0303000000 100
SST
MEW 1/32
EK 2
0152700000
0445600000
0323100000
SST
MEW 1/32
EK 2
0152700000
0445600000
0323100000
0212260000 20
Small partition
Cross-connection
Q3
QB 4
2-pole
3-pole
4-pole
10-pole
25-pole
Additional accessories
Marking tags
DEK
Print
Standard
On demand
On demand
Mounting rails, end brackets, further marking material see “Accessories”
155
Feed-through terminals for initiators and actuators
DLI 2.5
Dimensions/approvals
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule according to DIN 46228/1
mm2
Plug gauge according to 60 947-7-1
Size
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2…5-pole
A
Continuous current rating of cross-connection 6…10-pole
A
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
Standard
with diode 1N4007
with LED red (5…30 V)
with LED green (5…30 V)
with LED and diode 1N4007
with LED and diode 1N4007
Block of 101)
Block of 101)
Fuse inserts
End plate/Small partition
AP-DLI
AP-DLD
Part-AP
TSch 1
DLI 2.5 LD
DLI 2.5 LD
PNP
DLD 2.5
NPN
W
W
W
ar#
6/65/49
7 mm/M 2.5/3.5 x 0.6
ar#
6/65/49
7 mm/M 2.5/3.5 x 0.6
ar#
6/65/49
7 mm/M 2.5/3.5 x 0.6
ar#
6/82/49
7 mm/M 2.5/3.5 x 0.6
250 V/20 A/2.5 mm2
4 kV/3
5–30 V-/20 A/2.5 mm2
0.8 kV/3
5–30 V-/20 A/2.5 mm2
0.8 kV/3
250 V/24 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.4…0.6
1
0.4…0.6
1
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…10) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…10) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…10) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
1313360000 100
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
1317060000 50
W
Cat. No.
Qty.
W
1578510000 100
1578520000 100
Best.-Nr .
W
(Q 2…10) 20
Qty.
1578550000 100
1578560000 100
(with dekafix) 1579070000
1411360000 10
10
(LED red) 1578530000
(LED green) 1578540000
Type
AP
Cat. No. Qty.
1313260000 20
Type
AP
Cat. No.
Qty.
1313260000 20
Type
AP
Cat. No.
Qty.
1313260000 20
TSch 1
0319160000 100
TSch 1
0319160000 100
TSch 1
0319160000 100
(w/o)
10
10
Type
Cat. No.
Qty.
AP
1317660000 20
AP (Part-AP)1381860000 20
TSch 1
0319160000 100
(thickness 1.5 mm)
Test plug/plug socket
StB 8.5
PS
Cross-connection
Q3
VQB
Snap fit, external cross-connection VQB 1.5.
For cross-connections for more
than 20 terminals, replace VH with
VH 4.2 (134580)
without internal thread
Group marking
WT 4
Cover
HP 4
Marking tags
DEK
Print
Standard
StB8.5*(ø2.3) 0215700000
50
PS 2.3
0180400000
20
Q
Q
Q
Q
Q
1312500000
1312600000
1312700000
1313100000
1399800000
50
50
50
20
20
2
3
4
10
20
Q
Q
Q
Q
Q
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
50
50
50
20
20
Q
Q
Q
Q
Q
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
50
20
Q
Q
Q
Q
Q
50
50
50
20
20
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
QL 2
0297200000 100
VH 4.2
1345800000 100
VQB1.5/50BL 1633280000
5
VQB1.5/50RT 1633290000
5
VQB1.5/50SW1635120000
5
QL 2
VH 4.2
0297200000 100
1345800000 100
VQB1.5/50 BL1633280000
5
VQB1.5/50RT 1633290000
5
VQB1.5/50 SW 1635120000
5
QL 2
VH 4.2
0297200000 100
1345800000 100
VQB1.5/50 BL1633280000
5
VQB1.5/50RT 1633290000
5
VQB1.5/50 SW 1635120000
5
QL 2
VH 4.2
WT 4
SF 10
SG 10
1341060000 100
03324000001000
03325000001000
WT 4
SF 10
SG 10
1341060000 100
03324000001000
03325000001000
WT 4
SF 10
SG 10
1341060000 100
03324000001000
03325000001000
WT 4
SF 10
SG 10
1341060000 100
03324000001000
0332500000 1000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
20
20
20
20
Mounting rails, end brackets, further marking material see “Accessories”
1)
156
50
50
50
20
20
StB8.5*(ø23
. ) 0215700000
PS 2.3
0180400000
DLI 2.5/35/10 = Block of 10 with built-in cross-connections * only in upper busbar
20
20
0297200000 100
1345800000 100
VQB1.5/50 BL1633280000
5
VQB1.5/50RT 1633290000
5
VQB1.5/50 SW 1635120000
5
20
20
Feed-through terminals for initiators and actuators
DLA 2.5
DLA 2.5/D
DLA 2.5/LD
W
W
W
DLA 2.5/LD/D
DLD 2.5/PE
W
KDKS1 / PE
W
W
A4
A4
A4
A4
A3
arq#
6/65/49
7 mm/M 2.5/3.5 x 0.6
arq#
6/65/49
7 mm/M 2.5/3.5 x 0.6
arq#
6/65/49
7 mm/M 2.5/3.5 x 0.6
arq#
6/65/49
7 mm/M 2.5/3.5 x 0.6
ar#
6/74.5/49
7 mm/M 2.5/3.5 x 0.6
a#
8/91/65
8 mm/M 32)/M 2.53)/3.5 x 0.6
250 V**/17.5 A/2.5 mm2
4 kV/3
250 V**/17.5 A/2.5 mm2
4 kV/3
5–30 V/17.5 A/2.5 mm2
0.8 kV/3
5–30 V/17.5 A/2.5 mm2
0.8 kV/3
250 V**/17.5 A/2.5 mm2
4 kV/3
500 V / 6 . 3 A / 4 mm2
6 kV/3
0.4…0.6
1
0.4…0.6
1
0.4…0.6
1
0.4…0.6
1
0.4…0.6
1
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…20) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…20) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…20) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…20) 20
0.5…4
0.5…2.5
0.5…4
0.5…2.5
A3
20 A/2.5 mm2
(Q 2…20) 20
0.5…4
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
1565970000 100
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
300 V/10 A/26…12 AWG
5–30 V/10 A/26…12 AWG
W
Cat. No.
Qty.
300 V/10 A/26…12 AWG
5–30 V/10 A/26…12 AWG
W
Cat. No.
Qty.
300 V/10 A/26…12 AWG
300 V/10 A/26...12 AWG
W
Cat. No.
Qty.
1595950000 100
-/-/22...12 AWG
0.5…1 2)/ 0 . 4…0.73)
2/1***
1578400000 100
1578430000 100
1578440000 100
(w. dekafix) 1578380000
(w/o dekafix) 1578390000
(LED
(LED
(LED
(LED
10
10
red)
green)
red)
green)
Cat. No.
Qty.
1313260000 20
Type
AP
Cat. No.
Qty.
1313260000 20
Type
AP
Cat. No.
Qty.
1313260000 20
Type
AP
Cat. No.
Qty.
1313260000 20
TSch 1
0319160000 100
TSch 1
0319160000 100
TSch 1
0319160000 100
TSch 1
0319160000 100
50
20
Q
Q
Q
Q
Q
50
50
50
20
20
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
QL 2
VH 4.2
0297200000 100
1345800000 100
VQB1.5/50BL 1633280000
5
VQB1.5/50RT 1633290000
5
VQB1.5/50SW 1635120000
5
Q
Q
Q
Q
Q
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
50
50
50
20
20
QL 2
VH 4.2
Q
Q
Q
Q
Q
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
50
50
50
20
20
Q
Q
Q
Q
Q
2
3
4
10
20
1312500000
1312600000
1312700000
1313100000
1399800000
50
50
50
20
20
Type
Cat. No.
Qty.
AP
1595960000 20
AP (Part-AP) 1595970000
TSch 1
0319160000 100
StB8.5*(ø2.3) 0215700000
PS 2.3
0180400000
50
20
Q
Q
Q
Q
Q
50
50
50
20
20
2
3
4
10
20
0297200000 100
1345800000 100
VQB1.5/50 BL 1633280000
5
VQB1.5/50 RT 1633290000
5
VQB1.5/50 SW 1635120000
5
QL 2
VH 4.2
0297200000 100
1345800000 100
VQB1.5/50 BL 1633280000
5
VQB1.5/50 RT 1633290000
5
VQB1.5/50 SW 1635120000
5
QL 2
VH 4.2
0297200000 100
1345800000 100
VQB1.5/50 BL 1633280000
5
VQB1.5/50 RT 1633290000
5
VQB1.5/50 SW 1635120000
5
QL 2
VH 4.2
1312500000
1312600000
1312700000
1313100000
1399800000
1341060000 100
0332400000 1000
0332500000 1000
WT 4
SF 10
SG 10
1341060000 100
0332400000 1000
0332500000 1000
WT 4
SF 10
SG 10
1341060000 100
0332400000 1000
0332500000 1000
WT 4
SF 10
SG 10
1341060000 100
0332400000 1000
0332500000 1000
WT 4
SF 10
SG 10
1341060000 100
0332400000 1000
0332500000 1000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
ADP
HP 4
0485400000
0485860000
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
20
20
20
20
20
20
5 x 20 without core indicator
Type
Cat. No.
Qty.
AP
9503330000 50
AP Wemid 9532470000 50
QB 2
QB 3
QB 4
0461100000
0461200000
0461300000
50
50
50
DEK 8
see “Accessories”
0297200000 100
1345800000 100
VQB1.5/50 BL 1633280000
5
VQB1.5/50 RT 1633290000
5
VQB1.5/50 SW 1635120000
5
WT 4
SF 10
SG 10
20
20
Cat. No.
Qty.
9528110000 50
not combine with
DLI / DLA
Wemid
9532450000 50
W
1578470000 100
1578480000 100
1578490000 10
1578500000 10
Type
AP
StB8.5*(ø2.3) 0215700000
PS 2.3
0180400000
SAK-series
0.5…4
0.5…4
A 4 2)/ A 33)
20
20
** If the cross-connection runs via the PE connection of the DLA, or if a pole is generally skipped, the rated voltage is reduced to 30 V~
2) A4 clamping position = max 4 mm2 ... 3) A3 clamping position = max 2.5 mm2 ... ferrule with/without plastic insulating collar
157
Feed-through terminals for initiators and motors
VLI 1.5
VLI 1.5PE
W
MAK 2.5
W
W
Dimensions/approvals
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
aq#
6/79/64
8 mm/M 2.5/3.5 x 0.6
aq#
6/69/63
8 mm/M 2.5/3.5 x 0.6
ar#
6/88/64
8 mm/M 2.5/3.5 x 0.6
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
250 V/17.5 A/1.5 mm2
250 V/17.5 A/1.5 mm2
4 kV/3
4 kV/3
500 V (L-L) / 250 V (L-PE)
24 A/2.5 mm2
6 kV/3
0.4…0.6**
1
0.4…0.6
1
0.4…0.6
1
0.5…4.0
0.5…2.5
0.5…4
0.5…2.5
0.5…2.5
A3
0.5…4.0
0.5…2.5
0.5…4
0.5…2.5
0.5…2.5
A3
0.5…4.0
0.5…2.5
1.5…4
0.5…2.5
0.5…2.5
A3
24 A/2.5 mm2
24
24 A/2.5 mm2
24
24 A/4 mm2
24
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
1633250000 50
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
1633310000 50
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
W
Cat. No.
Qty.
1615270000 50
1631650000 50
Type
AP VLI1.5
Type
Cat. No.
Qty.
APVLI1.5/PE 1633320000 20
Type
Cat. No.
Qty.
AP MAK2.5 1615280000 20
TEAP2 MAK2.51633330000 20
Rated impulse voltage/pollution severity
Further technical data
Tightening torque range
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
Stranded H07V-R
Flexible H07V-K
Flexible H07V-K and ferrule DIN 46 228/1
Flexible H07V-K and ferrule with plastic insul. collar
Plug gauge according to 60 947-7-1
Continuous current of terminal for conductor size
Continuous current rating of cross-connection, multipole
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
Nm
mm2
mm2
mm2
mm2
mm2
Size
A
UL
CSA
Version
PA
End plate/partition
End plate
Partial end plate for VLI1.5 – MAK2.5 combination
Partial end plate for VLI1.5 – VLI1.5PE combination
Partial end plate for VLI1.5PE – MAK2.5 combination
Cross-connection
VQB 50-pole, snap-fit, external cross-connection
Cat. No.
Qty.
1633260000 20
TEAP 2 MAK2.5 1633330000 20
TEAP VLI1.5 1633270000 20
VQB1.5/50BL* 1633280000
VQB1.5/50RT* 1633290000
VQB1.5/50SW*1635120000
5
5
5
TEAP VLI1.5 1633270000 20
TEAP1MAK2.5 1633340000 20
TEAP1 MAK2.51633340000 20
VQB1.5/50BL* 1633280000 5
VQB1.5/50RT* 1633290000 5
VQB1.5/50SW*1635120000 5
VQB1.5/50BL* 1633280000
VQB1.5/50RT* 1633290000
VQB1.5/50SW*1635120000
QB 25 SW* 0520000000
QB 25 RT* 0520060000
QB 25 BL* 0520080000
QB 25-pole external cross-connection
5
5
5
20
20
20
Group marking
Tag carrier
for S 10 tags
Marking tags
DEK
Print
Standard
T5
SF 10
SG 10
0348500000 100
03324000001000
03325000001000
T5
SF 10
SG 10
0348500000 100
03324000001000
03325000001000
T5
SF 10
SG 10
0348500000 100
03324000001000
03325000001000
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* When using cross-connection bridges, the connected cross-section is reduced by one level
** 0.4…0.45 for lower connection level
158
Disconnect test terminal against induced high voltage
PPT/35
SAKH 6
Y
Dimensions/approvals
Width/length/height (mm)
with TS 35 x 7.5 W
Insulation stripping length/clamping screw/screwdriver blade
• Insulation between installation and control cable by pulling disconnect plugs.
Rated data according to IEC 60 947-7-1
Rated voltage/current
Rated impulse voltage/pollution severity
• Grounding of control cable is possible on
an appropriate location of the workplace.
• Easy connection of electric isolation of
counting, control and communication circuits.
Clampable conductor
Solid H07V-U
Stranded H07V-R
mm2
mm2
Ordering data
Version
EP
EP
0.5...10
0.5...10*
0.5... 6
0.5... 6
W
Cat. No.
Qty.
PPT/35
3835020000 10
incl. disconnect plug and displacement tool (if min. 10
items are ordered)
W
SAKH 6
Cat. No.
Qty.
0126600000 50
AP/PPT (3) 3835120000
10
TST/PPT
10
AP
0131700000
20
Disconnect plug
Displacement tool
• Separation of control cables from local
control circuits.
Test plug/socket
• Grounding of control cables and / or
auxiliary control circuits.
1 kV ac / 1.5 kV dc / 47 A
>15 kV (from terminal to terminal)
End plate
• Insulation of the control cables located in
front of ground or installation lines with
increased potential, which is required to
prevent unintentional contact of service
staff with live parts.
• Application also includes test connections for auxiliary control circuits and / or
local control circuits.
12 mm
15 kV ac (ESI 12-4)**/30 A
Electricity Supply Industry Standard
ESI 12-4 1973
The Electricity Supply Industry Standard
ESI 12-4 1973 defines a detailed specification of control and protection equipment.
The main functions of thiese installations
are as follows:
15/138/79
12 mm
PA
3835360000
PH/PPT
3835260000 10
The disconnect plug may only
be removed with the displacement tool.
PS (4)
StB 17
0299600000
0147100000
20
50
TSK 35
0514300000
1
Insulated mounting rail
PVC 35 x 1.5 mm
Marking tags
DEK
• Bundled disconnection of all auxiliary
control circuits from potential earth.
Print
Standard
DEK 5 see “Accessories”
DEK 5 see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
• A test voltage can be applied using the
screening connection of the control
cable, which is normally routed on the
enclosure, with the help of an appropriate separation. This permits to check
whether the screening line is correctly
functioning. For this test, an insulated
feed-through plate is required.
ESI 12-4:
"Terminating Equipment for Pilot Cables
subject to Induced Transient Voltages
exceeding 650 V rms".
* Also two push-on tabs are possible
** mounted on an insulated mounting rail
159
SAK-series
Measures to minimize risks of electric voltage peaks in control systems of power
plants and transforming stations:
Rail mounting TS 15
Feed-through terminals
Protective conductor terminals
Fuse terminals
Disconnect test terminals
AKZ 1.5
AKZ 1.5/10
AKZ 2.5
Max. technical data
Dimensions/approvals
Width/length/height (mm)
21.5 A / 2.5 mm2
ar#
5/25/25
26 A / 4 mm2
ar#
5/25.5/28
38.5 A / 6 mm2
ar#
6/27/30
38.5 A / 6 mm2
Insulation stripping length/clamping screw/screwdriver blade
Rated data VDE 0611 Part 1/8.92/IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage / pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
7 mm/M 2.5/3.0 x 0.5
7 mm/M 2.5/3.0 x 0.5
8 mm/M 3/3.5 x 0.6
9 mm/M 3/3.5 x 0.6
250 V/17.5 A/1.5 mm2
4 kV/3
250 V/24 A/2.5 mm2
4 kV/3
400 V/32 A/4 mm2
6 kV/3
500 V/32 A/4 mm2
6 kV/3
0.4…0.6
1
0.4…0.6
1
0.5…1.0
2
0.5…1.0
2
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.2…2.5 / A 1
0.5…4
1.5…2.5
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.2…6.0 / A 3
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.2…6.0 / A 3
Continuous current rating of cross-connection 2-pole
Continuous current rating of cross-connection multipole
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
24
24
24
24
32
32
32
32
150 V/15 A/22…14 AWG
300 V/10 A/24…16 AWG
U TS 15 Cat. No.
Qty.
300 V/10 A/26…12 AWG
300 V/10 A/26…12 AWG
U TS 15 Cat. No.
Qty.
300V/27 A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
0340460000 100
0340480000 100
(10pol./no mk.) 0358060000 10
(10pol./w.mk.) 0358160000 10
(with pin)
(with pin)
(without pin)
AKZ 2.5 w. AP
300 V/27A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
0294320000 100
0294360000 100
0294380000 100
(10pol./no mk.) 0359560000 10
(10pol./w.mk.) 0359660000 10
AKZ4Wemid 9537110000 100
U
U
with TS 15 U
A
A
UL
CSA
Type
KrG
PA
Blue PA
PA
PA
End plate (thickness mm)
Type
KrG
Wemid
PA
Blue PA
AP (1.5)
Cat. No.
AKZ 4
AKZ 4/10
AKZ 4 Wemid
Qty.
0340560000 50
Type
AP (2.5)
AP (2.5)
U
0697160000 100
0697180000 100
0175960000 100
0385860000 50
Cat. No.
AKZ 4 for test adapter
AKZ 4/10 for test adapter
Qty.
0697360000 50
0697380000 50
Type
AP (1.5)
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
Qty.
0294420000 20
9537910000 20
0294460000 20
0294480000 20
TW (2.0)
0118900000 20
TW (0.5)
ar#
60/27/30
for test adapter1538260000 100
w.mk./f.test ad.1489360000
10
ATA1,10-pole 1633240000
5
Type
Cat. No.
Qty.
AP (1.5)
0294460000 20
0348260000 50
TW (0.5)
0348260000 50
TSch 4
0363360000 100
TSch 4
0363360000 100
Q2
Q3
Q4
0336400000 50
0336500000 50
0336600000 50
Q2
Q3
Q4
0336400000 50
0336500000 50
0336600000 50
Q 10
0368600000 20
Q 10
0368600000 20
Partition (thickness mm)
KrG
PA
Blue PA
TW (1.5)
TW (1.5)
0318560000 20
0318580000 20
Small partition
PA
Cross-connection
Q
Q
Q
Q
Q
Q2
QB 4
Switchable cross-connection link
2
3
4
5
10
0368200000
0368300000
0368400000
0660300000
0368500000
50
50
50
20
20
Q
Q
Q
Q
Q
2
3
4
5
10
0368200000
0368300000
0368400000
0660300000
0368500000
50
50
50
20
20
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
Marking tags can be snapped
on via cross-connection
AD 4
0303400000 50
BSK M2.5x18 0303300000 100
ADP 41)
1378160000 10
AD 4
0303400000 50
BSK M 2.5x18 0303300000 100
ADP 41)
1378160000 10
VL
BS
VH
Cover/Profiled material for covers for finger-safety*
Test plug/socket
StB
PS
Plug test socket
can be used without QL
K sleeve
Marking tags
DEK
Print
Standard
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
* not for terminals made from PA
160
1)
Length: 300 mm
Rail mounting TS 15
AKE 2.5
AKE 4
U
38.5 A / 6 mm2
ar
60/32/34
AKE 4 MS
SAKR
Isolating blade terminal with 2
sockets or
with 2 clamping screws
U
U
ar
5/28/27
ASK 1
Fuse terminal
U
U
ar
7/32/34
r
7/27.5/30
ar
8/58/34
6.5/42/45
9 mm/M 3/3.5 x 0.6
IEC 60 947-7-2
–/–/4 mm2
8 kV/3
9 mm/M 3/3.5 x 0.6
9 mm/M 3/3.5 x 0.6
8 mm/M 3/3.5 x 0.6
690 V/32 A/4 mm2
8 kV/3
7 mm/M 2.5/3.0 x 0.5
IEC 60 947-7-2
–/–/2.5 mm2
4 kV/3
–/–/4 mm2
500 V/6.3 A*/4 mm2
6 kV/3
400 V2)/10 A/4 mm2
6 kV/3
0.5…1.0
2
0.4…0.6
1
0.5…1.0
2
0.8…1.6
3
0.5…1.0
2
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.2…6.0 / A 3
0.5…4
1.5…2.5
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
0.5…6
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.5…4.0 / A 3
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13…4.0 / A 3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13…4.0 / A 3
(QB 2…4) 10
(QB 2…4) 10
9 mm/M 3/3.5 x 0.6
20
20
U TS 15
Cat. No.
Qty.
–/–/26…12 AWG
–/–/26…12 AWG
U TS 15 Cat. No.
0489560000 100
Qty.
–/–/22…12 AWG
–/–/26…12 AWG
U TS 15 Cat. No.
1303360000 100
(green/yellow)
Qty.
–/–/22…14 AWG
U TS 15 Cat. No.
0380260000 100
(green/yellow)
Qty.
0211200000 50
300 V/10 A/22…12 AWG
300 V/6.3 A/26…12 AWG
U TS 15 Cat. No.
Qty.
0376860000 100
5 x 20 without indicator
(10pol./no mk.) 0366560000 10
U TS 15
with 2 StB
Cat. No.
SAK-series
AK 4
AK 4/10
Qty.
0412860000 100
w. clamp.screw 0412760000 100
(10pol./w.mk.) 0469560000 10
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
Type
BB 3 (8.0)
0366660000 50
combined AP + end brackets
Cat. No.
Qty.
Type
AP (1.5)
Cat. No.
Qty.
0380360000 20
Type
AP (1.5)
Cat. No.
Qty.
0211360000 20
TW/AP (1.5) 1331760000 20
TSch 4
0363360000 100
Q2
Q3
Q4
0369000000 50
0369100000 50
0369200000 50
QB 21) insul. 0461100000 50
QB 31) insul. 0461200000 50
QB 41) insul. 0461300000 50
Q 10
0369300000 20
3-pole ganging with tag bar
SchS 2, snapped onto three
disconnect levers
(Cat. No. 0337400000)
QB 21) insul. 0482700000
QB 31) insul. 0482800000
QB 41) insul. 0482900000
QB 251) blank 0134000000
50
50
50
20
AD 4
0303400000 50
BSK M 2.5x18 0303300000 100
StB 8.5
0215700000 50
PS 2.3
0180400000 20
DEK 6
see “Accessories”
DEK 5
see “Accessories”
DEK 6.5
see “Accessories”
1)
K sleeve
0553300000 100
PS 2.3
0180400000 20
DEK 6.5
see “Accessories”
DEK 6.5
see “Accessories”
The conductor cross-section is * With contact sleeve 19 A
reduced to max. 2.5 mm2
when QB is used.
2)
As disconnect test terminal:
rated voltage 250 V
161
Feed-through terminals for TS 15
Tab connection
Solder connection
AKZ 4 SS
AKZ 4 SS
U
Dimensions/approvals
Width/length/height (mm)
with TS 15 U
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole
Continuous current rating of cross-connection multipole
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
A
A
UL
CSA
Type
KrG
PA
Blue PA
PA
End plate (thickness mm)
PA
PA
Blue PA
HP
HP
BB
AKZ 4 S
ar
6/28.5/30.5
400 V/8 A/2.5/1 mm2
6 kV/3
U
U
U
ar
6/28.5/30.5
AKZ 4 SF
400 V/8 A/1 mm2
6 kV/3
ar
6/27/30
r
6/27/30
9 mm/M 3/3.5 x 0.6
9 mm/M 3/3.5 x 0.6
400 V/8 A/4/1 mm2
6 kV/3
400 V/8 A/4/1 mm2
6 kV/3
0.5…1.0
2
0.5…1.0
2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.2...4/A 3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.2...4/A 3
Tab connec. 6.3 and 2.8 mm
Tab connection 2.8 mm
20
20
20
20
20
20
20
20
150 V/10 A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
150 V/10 A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
150 V/20 A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
0324560000 100
0362460000 100
0324460000 100
0158760000 100
Type
AP (1.5)
Cat. No.
Qty.
0294460000 20
Type
AP (1.5)
Cat. No.
Qty.
0294460000 20
Type
AP (1.5)
Cat. No.
Qty.
0294460000 20
Type
AP (1.5)
Cat. No.
Qty.
0294460000 20
TW (0.5)
0348260000 50
TW (0.5)
0348260000 50
TW (0.5)
0348260000 50
TW (0.5)
0348260000 50
Q
Q
Q
Q
0369000000
0369100000
0369200000
0369300000
Q
Q
Q
Q
0369000000
0369100000
0369200000
0369300000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Partition (thickness mm)
PA
HP
HP
Small partition
Cross-connection
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
Switchable cross-connection link
VL
Test plug/socket
StB
BS
VH
Plug test socket ø 2.3
PS
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
IH 2.8
IH 6.3
0386060000 100
0386260000 100
IH 2.8
0386060000100
IH 2.8
0386060000 100
IH 2.8
IH 6.3
0386060000 100
0386260000 100
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
Cover
Insulation sleeves
Marking tags
DEK
Print
Standard
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain the rated voltage.
162
Feed-through terminals for TS 15
AKZ 1.5 L
U
U
6.5/32/21
400 V/16 A/1 mm2
6 kV/3
0.5…1
0.5…1
U TS 15
AKZ 4 L
Cat. No.
Qty.
0137320000 100
U
EP (1.0)
Cat. No.
Qty.
U
r
5/34.5/25
ar
6/35.5/30
7 mm / M 2.5 / 3.0 x 0.5
9 mm / M 3 / 3.5 x 0.6
250 V/16 A/1.5 mm2
4 kV/3
250 V/16 A/4/1.5 mm2
4 kV/3
0.4…0.7
1
0.5…1.0
2
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.2…2.5 / A 1
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.2...4.0 / A 3
0.5…1.5
1.5
0.5…1.5
24
24
20
20
20
20
300 V/20 A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
0334820000 100
0334860000 100
300 V/20 A/22…12 AWG
300 V/10 A/24…12 AWG
U TS 15 Cat. No.
Qty.
150 V/10 A/24…16 AWG
U TS 15 Cat. No.
Qty.
0340160000 100
Type
AKZ 4 LL
Type
AP (1.5)
Cat. No.
Qty.
0329660000 20
ar
6/44/30
250 V/16 A/1.5 mm2
4 kV/3
SAK-series
AL 1
0.2…2.5 / -
Type
AP (1.5)
AP (1.5)
AP (1.5)
Cat. No.
Qty.
0294420000 20
0294460000 20
0294480000 20
TW (0.5)
0346460000 100
Type
Cat. No.
Qty.
AP (1.5)
0294460000 20
0348260000 50
TW (0.5)
0348260000 50
TSch 4
0363360000 100
TSch 4
0363360000 100
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
0164100000 100
EP(1.0 tropi. pr.) 0164500000100
TW (0.5)
0166800000 50
TW (0.5)
Q
Q
Q
Q
DEK 6.5
see “Accessories”
2
3
4
10
0166800000 50
0368200000
0368300000
0368400000
0368500000
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5 x 14 0266800000 100
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
AD 4
0303400000 50
BSK M 2.5x18 0303300000 100
AD 4
0303400000 50
BSK M 2.5x18 0303300000 100
DEK 6
DEK 6
DEK 5
see “Accessories”
see “Accessories”
see “Accessories”
163
Feed-through terminals for TS 15
Solder connection
Spring-clip connection
AKZ 1.5 T
AKZ 1.5 T
AKZ 1.5 T
AKZ 2.5 K
acc. to DIN 41611 Part 4
Wrap connection
acc. to DIN/IEC 352 Part 1
U
U
U
*
U
Dimensions/approvals
Width/length/height (mm)
with TS 15 U
Pin size
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
ar
5/25/45
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
* 035786 = 45 mm
a
5/25/39.5
1x1
7 mm/M 2.5/3.0 x 0.5
125 V/8 A/1.5 mm2
2.5 kV/3
125 V/8 A/1.5 mm2
2.5 kV/3
125 V/8 A/1.5 mm2
2.5 kV/3
125 V/10 A/2.5 mm2
2.5 kV/3
0.4…0.7
1
0.4…0.7
1
0.4…0.7
1
0.4…0.6
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.13...2.5 / A1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.13...2.5 / A1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
0.13...2.5 / A1
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
Continuous current rating of cross-connection 2-pole
A
Continuous current rating of cross-connection multipole
A
Rated data according to UL/CSA
Voltage/current/conductor size
UL
Voltage/current/conductor size
CSA
Ordering data
Pin versions
0.6 x 0.6
1.0 x 1.0
0.8 x 1.6 horizont.
0.8 x 1.6 vertical
Mounting,
Mounting,
0.8 x 2.4 horizontal
horizontal
vertical
0.8 x 2.4 vertical
24
24
24
24
24
24
24
24
300 V/10 A/26…14 AWG
300 V/10 A/24…16 AWG
Type
Cat. No.
Qty.
AKZ 1.5 T 0442560000 100
AKZ 1.5 T 0357960000 100
AKZ 1.5 W 0329460000 100
300 V/10 A/26…14 AWG
Type
AKZ 1.5 T
AKZ 1.5 T
Cat. No.
Qty.
0483660000 100
0357860000 100
300 V/10 A/26…14 AWG
300 V/10 A/24…16 AWG
Type
Cat. No.
Qty.
AKZ 1.5 T 0400460000 100
AKZ 1.5 T 0400360000 100
300 V/10 A/26…14 AWG
300 V/10 A/26…10 AWG
Type
Cat. No.
Qty.
AKZ 2.5 K 0696260000100
AP (1.5)
AP (1.5)
0340560000 50
AP (1.5)
AP (2.5)
0697260000 50
TW (1.5)
0318560000 20
Q
Q
Q
Q
0368200000
0368300000
0368400000
0368500000
ar
5/28/44
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
ar
5/26/46.7
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
End plate (thickness mm)
PA
0340560000 50
0340560000 50
Partition (thickness mm)
PA
Small partition
Cross-connection
2-pole
3-pole
4-pole
10-pole
Q
Q
Q
Q
2
3
4
10
0368200000
0368300000
0368400000
0368500000
50
50
50
20
Q
Q
Q
Q
2
3
4
10
0368200000
0368300000
0368400000
0368500000
50
50
50
20
Q
Q
Q
Q
2
3
4
10
0368200000
0368300000
0368400000
0368500000
50
50
50
20
2
3
4
10
50
50
50
20
Q3
Switchable cross-connection link
VL
BS
Test plug/socket
StB
VH
Plug test socket ø 2.3
PS
Marking tags
DEK
Print
Standard
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
164
Feed-through terminals for TS 15
AKZ 2.5 K
AKZ 2.5 K
AKZ 4 T
U
U
U
AKZ 4 T
AKZ 4 T
AKZ 4 ST
U
U
U
ar
5/47.5/27
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
ar
6/27/48.5
1x1
9 mm/M 3/3.5 x 0.6
ar
6/27/50.5
0.8 x 1.6
9 mm/M 3/3.5 x 0.6
ar
6/27/57,8
0.8 x 2.4
9 mm/M 3/3.5 x 0.6
r
6/27/50.2
0.8 x 1.6
–
250 V/8 A/2.5 mm2
4 kV/3
250 V/8 A/2.5 mm2
4 kV/3
250 V/10 A/4 mm2
4 kV/3
250 V/10 A/4 mm2
4 kV/3
250 V/10 A/4 mm2
4 kV/3
250 V/10 A/2.5 mm2
4 kV/3
0.4…0.6
1
0.4…0.6
1
0.5…1.0
2
0.5…1.0
2
0.5…1.0
2
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13...4.0 / A3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13...4.0 / A3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.13...4.0 / A3
0.5...2.5 / -
24
24
24
24
20
20
20
20
20
20
20
20
300 V/10 A/26…14 AWG
300 V/10 A/26…10 AWG
Type
Cat. No.
Qty.
AKZ 2.5 K 0695460000 100
300 V/10 A/26…14 AWG
300 V/10 A/26…10 AWG
Type
Cat. No.
Qty.
300 V/10 A/26…14 AWG
300 V/10 A/24…12 AWG
Type
Cat. No.
Qty.
300 V/10 A/26…14 AWG
300 V/10 A/24…12 AWG
Type
Cat. No.
Qty.
300 V/10 A/26…14 AWG
300 V/10 A/24…12 AWG
Type
Cat. No.
Qty.
300 V/10 A/24…12 AWG
Type
Cat. No.
Qty.
AKZ 2.5 K
AKZ 4 T
AKZ 2.5 K
0695660000 100
AKZ 2.5 K
0695960000 100
0445860000 100
AKZ 4 T
AKZ 4 T
0696160000 100
SAK-series
ar
5/26/46.7
0.8 x 1.6
7 mm/M 2.5/3.0 x 0.5
AKZ 4 ST
0439260000 100
0344160000 100
0344060000 100
AKZ 4 T
AKZ 4 T
0366460000 100
0461660000 100
AP (2.5)
0697260000 50
AP (2.5)
0697260000 50
AP (1.5)
0294460000 20
AP (1.5)
0294460000 20
AP (1.5)
0294460000 20
AP (1.5)
0294460000 20
TW (1.5)
0318560000 20
TW (1.5)
0318560000 20
TW (1.5)
0348260000 50
TW (1.5)
0348260000 50
TW (1.5)
0348260000 50
TW (1.5)
0348260000 50
TSch 4
0363360000 100
TSch 4
0363360000 100
TSch 4
0363360000 100
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
Q
Q
Q
Q
0369000000
0369100000
0369200000
0369300000
Q
Q
Q
Q
2
3
4
10
0368200000
0368300000
0368400000
0368500000
50
50
50
20
Q
Q
Q
Q
2
3
4
10
0368200000
0368300000
0368400000
0368500000
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x14 0266800000 100
2
3
4
10
50
50
50
20
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
StB 8.5
0215700000 50
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
PS 2.3
0180400000 20
DEK 5
see “Accessories”
DEK 5
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
165
Feed-through terminals for TS 15
for temperature measuring
circuits
AKZ 4/TC
U
Weidmüller’s thermocouple terminals are
specially designed for transmitting the
smallest voltages in temperature measuring circuits. Special busbars ensure that
no false signals occur in the terminal when
temperature differences exist in the positive and negative path. This high measuring
precision is necessary for, e.g. test beds
for aircraft engines, for complicated chemical processes, control systems, etc.
• Busbar material corresponds to thermal
and compensating conductors
• Clear thermocouple marking
• 2-pole blocks per thermocouple
• Row width 14 mm, incl. end plate
Configuration of a temperature measuring circuit
Dimensions
Width/length/height (mm)
with TS 15 U
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage/current/cross-section
Further technical data
Tightening torque range
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
Stranded H07V-R
Flexible H07V-K
Flexible H07V-K and ferrule DIN 46 228/1
Flexible H07V-K and ferrule with plastic insul. collar
Plug gauge acc. to IEC 60 947-1
Continuous current of terminal for conductor size
Continuous current rating of cross-connection 2-pole
Continuous current rating of cross-connection multipole
Ordering data Version
for thermocouples
Acc. to IEC 584 Type T
(DIN 43710)
Type K
Type E
14/27/30
9 mm/M 3/3.5 x 0.6
–/–/4 mm2
Nm
mm2
mm2
mm2
mm2
mm2
Size
0.5…1
2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
A3
A
A
U TS 15
Type J
Cu – CuNi
NiCr – Ni
NiCr – CuNi
Fe – CuNi
End plate
1 Thermocouple (sensor)
4 Reference point
2 Thermocouple terminals
5 Supply conductors (to
and from)
3 Compensating conductor
6 Measuring device
Cat. No.
Qty.
1627010000 20
on demand
1677130000 20
on demand
AP (thickness 1.5 mm)
PA
Cat. No.
Qty.
0294460000 20
TW (thickness 0.5 mm)
PA
0348260000 50
Partition
The thermocouple terminals displayed in
this measurement circuit are used to thermo-electrically transmit thermal e.m.f. of
the thermocouple to the reference point
and indicating device. Thermocouple terminals are required for the construction of
temperature measuring circuits.
Thermocouple, type J
Thermocouple acc. to IEC 584 (DIN 43 710)
Marking tags
Busbar
Constantan (CuNi)
Iron (Fe)
Mounting rails, end brackets, further marking material see “Accessories”
166
Print
Material V0
DEK 5/6
1789590000 500
Multipole terminal blocks
Screw connection
MK 2/12
MK 10/14
MK 3/12
MK 4/16
103
18.5
8.5
85.5
10
Dimensions/approvals
Width/length/height (mm)
ar
86/15/15
ar
88.5/13.5/12
ar
110/15/16.1
ar
103/17/16
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
5 mm/M 2.5/3.5 x 0.6
6 mm/M 2.5/3.5 x 0.6
5 mm/M 2.5/3.5 x 0.6
5 mm/M 2.5/3.5 x 0.6
125 V/24 A/2.5 mm2
2.5 kV/3
125 V/24 A/2.5 mm2
2.5 kV/3
400 V/24 A/2.5 mm2
6 kV/3
400 V/24 A/2.5 mm2
6 kV/3
0.4…0.45
1
0.4…0.45
1
0.4…0.45
1
0.4…0.45
1
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
300 V/10 A/24…12 AWG
300 V/10 A/24…12 AWG
Type
Cat. No.
Qty.
150 V/25 A/22…12 AWG
300 V/10 A/24…12 AWG
Type
Cat. No. Qty.
300 V/25 A/22…12 AWG
300 V/25 A/22…12 AWG
Type
Cat. No.
Qty.
MK 3/2 KrG 0273820000100
MK 3/3 KrG 0273920000 50
MK 3/4 KrG 0274020000 50
150 V/20 A/22…12 AWG
150 V/15 A/22…12 AWG
Type
Cat. No.
Qty.
Continuous current rating of cross-connection 2-pole
A
Continuous current rating of cross-connection multipole
A
Rated data according to UL/CSA
Voltage/current/conductor size
UL
Voltage/current/conductor size
CSA
Ordering data
Version
2-pole
3-pole
4-pole
4-pole
6-pole
6-pole
8-pole
8-pole
10-pole
12-pole
12-pole
14-pole
16-pole
MK 3/6 KrG 0274220000 50
MK 3/8 KrG 0274420000 25
MK 3/10 KrG 0274620000 20
MK 3/12 KrG 0243520000 20
MK 2/12 PA 0241260000 50
MK 10/14 PA 0370160000 20
other numbers on request
MK 4/16 KrG 0244220000 20
The MK 10/14 can be
mounted with glue or with
M 3 x 12* screws through the
empty terminal point aperture
*DIN EN ISO 1207
Soldering strip/expansion rivet
MF 2/12
SN
0241760000 50
0200100000500
Marking strips
printed
1 ...
BSTb 28/12 0245700000 50
bottom
BSTb 28/12 0278500000 50
top
BSTb
BSTb
BSTb
BSTb
28/12
28/8
28/6
28/4
0245900000
0290200000
0290000000
0289800000
50
50
50
50
BSTb 28/16 0262200000 50
bottom
BSTb 28/16 0278700000 50
top
unprinted
BSTo 28/12 0245600000 50
BSTo
BSTo
BSTo
BSTo
28/12
28/8
28/6
28/4
0245800000
0284700000
0289500000
0289300000
50
50
50
50
BSTo 28/16 0262100000 50
Printed on top on request
167
SAK-series
80
Multipole terminal blocks
Screw/tab connection
MK 5/2
KS 2…10
BK 2…12
MK 6/2…6/6
Dimensions/approvals
Width/length/height (mm)
40/18/15.5
ar
see table below
ari#
see table below
ar
see table below
5 mm/M 2.5/3.5 x 0.6
8 mm/M 3/4.0 x 0.8
8 mm/M 3/4.0 x 0.8
9 mm/M 4/4.0 x 0.8
500 V/24 A/2.5 mm2
6 kV/3
500 V/24 A/2.5 mm2
6 kV/3
400 V/32 A/4 mm2
6 kV/3
690 V/41 A/6 mm2
8 kV/3
0.4…0.45
1
0.5…0.7
2
0.5…0.7
2
1.2…2.0
4
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.2…4.0 / A 2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.2
0.2…4.0 / A 2
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.33…4.0 / A 3
0.5…6
1.5…6
0.5…6
0.5…4
0.5…4
0.33…6.0 / A 3
Type
Cat. No.
Qty.
MK 5/2 KrG 0243820000100
300 V/20 A/22…12 AWG
300 V/25 A/24…12 AWG
Type
Cat. No.
Qty.
KS 2 KrG2) 0134420000100
300 V/30 A/22…10 AWG
300 V/40 A/22…10 AWG
Type
Cat. No.
Qty.
MK 6/2 KrG 0620420000 50
MK 6/3 KrG 0620320000 50
MK 6/4 KrG 0620220000 20
MK 6/6 KrG 0620120000 20
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
Cover D 2
(for MK 5/2)
Cover D 4
(for KS 4)
UL
CSA
Versions
2-pole
3-pole
4-pole
4-pole
6-pole
6-pole
8-pole
8-pole
10-pole
12-pole
12-pole
Cover
D2(forMK 5/2)0244060000 50
Cover
KS 4 KrG2)
0140320000 50
300 V/10 A/22…12 AWG
300 V/10 A/22…12 AWG
Type
Cat. No.
Qty.
BK 2 KrG
0624720000 50
BK 3 KrG
0624920000 50
BK 4 KrG
0625120000 50
KS 6 KrG2)
0140620000 50
BK 6 KrG
0625220000 50
BK 12 KrG
0625320000 50
Dimensions
Type
BK 2
BK 3
BK 4
BK 6
BK 12
a
20
31
38
52
92
SN
0200100000 500
BSTb 28/2
BSTb 28/3
BSTb 28/4
BSTb 28/6
BSTb 28/12
BSTo 28/2
BSTo 28/3
BSTo 28/4
BSTo 28/6
BSTo 28/12
0203600000
0203800000
0197300000
0197500000
0198800000
0203500000
0203700000
0197200000
0197400000
0198700000
KS 10 KrG2) 0141620000 20
Cover
D 2 (for KS 2) 0134500000100
D 4 (for KS 4) 0140500000 50
D 6 (for KS 6) 0140800000 50
D10 (for KS10) 0141800000 20
Marking tag cover
Dimensions
Type
a
KS 2
42
KS 4
66
KS 6
90
KS 10
138
b
32
56
80
128
b
–
11
18
32
72.5
Dimens. Length/attach.dim.
Type
KRG
MK 6/2
23.5
MK 6/3
36.5
13
MK 6/4
49.5
26
MK 6/6
75.5
52
Expansion rivet
Marking strips
printed
1…
ELSb
ELSb
ELSb
ELSb
2
4
6
10
0143200000
0143300000
0143400000
0143500000
50
50
50
50
unprinted
ELSo
ELSo
ELSo
ELSo
2
4
6
10
0142800000
0142900000
0143000000
0143100000
50
50
50
50
50
50
50
50
50
50
50
50
50
50
BSTb 17/6
Mounting rails, end brackets, further marking material see “Accessories”
168
1)
Projecting length = 1 mm. To be considered for the last terminal in a row!
Printed on top on request
2)
Please order cover and marking strips separately.
0304600000 50
Multipole terminal blocks
MF 1/6…1/12
SLS 2/2
SLS 2/4
ar
see below
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
UL
CSA
PA
ar
see below
8 mm/M 3.5/4.0 x 0.8
400 V*/16 A/2.5/1 mm2
6 kV/3
0.8…1.6
3
0.5…4
1.5…4
0.5…4
0.5…4
0.5…4
0.33...4.0 / A 3
300 V/10 A/24…12 AWG
300 V/10 A/22…10 AWG
Type
Cat. No.
Qty.
MF 1/6 KrG2) 0479720000100
MF 1/6 KrG3) 0480020000100
MF 1/8 KrG2) 0479820000 50
MF 1/8 KrG3) 0480120000 50
MF1/12 KrG2) 0479920000 50
MF1/12 KrG3) 0480220000 50
Dimensions
Type
a
b
MF 1/6
52 34
MF 1/8
68 50
MF 1/12 113+0.5 102
Expansion rivet/insulation sleeve
IH
400 V*/16 A/4 mm2
6 kV/3
IH 2.8
IH 6.3
SN
SAK-series
Max. technical data
Dimensions/approvals
Width/length/height (mm)
300 V/10 A/22…10 AWG
Type
Cat. No.
Qty.
SLS 2/2 KrG 0213420000 100
SLS 2/4 KrG 0240420000 50
SLS 2/4 KrG 0480320000 50
Slotted
c
d
9.5 6.5
9.5 6.5
8
7.5
0386060000 100
0386260000 100
0200100000500
IH 2.8
IH 6.3
0386060000 100
0386260000 100
Cover/marking strips
BSTb 10/6 0240900000 50
BSTb 10/8 0241100000 50
BSTb 10/12 0209500000 50
BSTo 10/6 0240800000 50
BSTo 10/8 0241000000 50
BSTo 10/12 0209400000 100
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain
the rated voltage.
2)
3)
Single tab
Double tab
169
Multipole terminal blocks
Screw, solder, tab connection
MKL 2/12
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
Horizontal
Other number of poles on demand
Vertical
Other number of poles on demand
UL
CSA
Versions
2-pole
4-pole
6-pole
12-pole
16-pole
MF 2/12
MKL 3/12
MKL 4/16
0241860000
0243620000
0262020000
0241760000
0249920000
0244320000
ar
103/24/16.5
88/23/15
75/24/6
ar
110/23/16
5 mm/M 2.5/3.5 x 0.6
5 mm
5mm/M 2.5/3.5 x 0.6
5mm/M 2.5/3.5 x 0.6
125 V/20 A/2.5/1.5/1 mm2
2.5 kV/3
63 V/17.5 A/1.5/1 mm2
1.5 kV/3
400 V* / 20 A / 2.5/ 1.5/ 1 mm2
6 kV/3
400 V/20 A/2.5/1.5/1 mm2
6 kV/3
0.4…0.45
1
0.4…0.45
1
0.4…0.45
1
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.2...2.5 / A 2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.33...4.0 / A 2
0.5…4
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.33...4.0 / A 2
300 V/25 A/22…12 AWG
300 V/25 A/22…12 AWG
Type
Cat.No.
Qty.
MKL3/2 KrG 0274920000**100
MKL 3/4KrG 0275120000**100
MKL 3/6 KrG 0275320000** 50
MKL 3/12KrG 0243620000** 20
300 V/25 A/22…12 AWG
150 V/15 A/22…12 AWG
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
MKL 2/12 PA 0241360000 50
MKL 4/16 KrG 02620200001)20
2-pole
4-pole
6-pole
12-pole
16-pole
MKL 3/2 KrG 0276020000* 100
MKL 3/6 KrG 0276420000* 50
MKL3/12KrG 0249920000* 20
MKL 4/16 KrG 0244320000 20
double-sided 2.8 x 0 . 8
single-sided 0.8 x 1.6/2.8 x 0 . 8
MF 2/12 PA 0241860000 50
MF 2/12 PA 0241760000 50
* For terminals directly mounted next to each other, the
rated voltage is reduced to
250 V.
** Rated voltage 250 V. For
terminals directly mounted
next to each other, the rated
voltage is reduced to 125 V.
Expansion rivet/insulation sleeve
SN
0200100000 500
IH
IH 2.8
0386060000 100
Marking strips
printed
1…
BSTb 28/12 0245700000 50
bottom
top
0278500000 50
BSTb 28/4 0289800000 50
BSTb 28/6 0290000000 50
BSTb 28/12 0245900000 50
BSTb 28/16 0262200000 50
bottom
top
unprinted
BSTo 28/12 0245600000 50
BSTo 28/4 0289300000 50
BSTo 28/6 0289500000 50
BSTo 28/12 0245800000 50
BSTo 28/16 0262100000 50
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain
the rated voltage.
170
1)
Rated voltage 250 V
Screw, solder, tab
connection
Modular design
AKB 4
AKZ 2.5
ASK 1
Max. technical data
32 A / 4 mm2
ar
6/27/23
–
9 mm/M 3/3.5 x 0.6
26 A / 2.5 mm2
ar
5/25.5/26.5
–
7 mm/M 2.5/3 x 0.5
ar
8/58/30.5
–
9 mm/M 3/3.5 x 0.6
400 V/32 A/4 mm2
6 kV/3
250 V/24 A/2.5 mm2
4 kV/3
500 V/6.3 A*/4 mm2
6 kV/3
0.5…1.0
2
0.4…0.6
1
0.5…1.0
2
0.5…6
1.5…4
0.5…4
0.5…4
0.5…4
0.33...4.0 / A3
0.5…4
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...4.0 / A3
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13...4.0 / A3
32
32
24
24
(QB 2…4) 10
300/250 V/27 A/22…12 AWG
300 V/10 A/22…12 AWG
Type
Cat. No.
Qty.
AKB 4 PA
0321560000 100
0321580000 100
Direct mounting with BB 1
please order separately
300 V/10 A/22…12 AWG
300 V/10 A/26…10 AWG
Type
Cat. No.
Qty.
AKZ 2.5
0697160000 100
AKZ 2.5
0697180000 100
Direct mounting with BB 4
please order separately
300 V/10 A/22…12 AWG
300 V/6.3 A/26…12 AWG
Type
Cat. No.
Qty.
ASK 1 PA
0376960000 100
BB 1 (7)
0320560000 50
BS M 3 x 15 0359000000 100
BB 4 (7.5)
0697560000 50
AP (2.5)
AP (2.5)
0697360000 50
0697380000 50
AP (1.5)
0380360000 20
Q
Q
Q
Q
0368200000
0368300000
0368400000
0368500000
QB 21)
QB 31)
QB 41)
0461100000 50
0461200000 50
0461300000 50
Dimensions/approvals
Width/length/height (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data according to IEC 60 947-7-1
Rated voltage/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole
Continuous current rating of cross-connection multipole
Rated data according to UL/CSA
Voltage/current/conductor size
Voltage/current/conductor size
Ordering data
A
A
UL
CSA
PA
Blue PA
SAK-series
Multipole terminal blocks
(for G fuse inserts
5x 20 without indicator)
End plate/attachment bracket (thickness mm)
AP
PA
Blue PA
Partition (thickness mm)
TW PA (0.5) 0348260000 50
Small partition
Cross-connection
Q3
QB 4
TSch 4
0363360000 100
Q
Q
Q
Q
0336400000
0336500000
0336600000
0368600000
2
3
4
10
50
50
50
20
2
3
4
10
50
50
50
20
Switchable cross-connection link
VL
BS
VL 2
0446700000 50
VH 10
0446600000 50
BS M 2.5x 14 0266800000 100
VH
For fixing the screws of ASK 1
please use
M 3 x ... DIN EN. ISO 1207 or
M 3 x ... DIN EN, ISO 1580
Test plug/socket
PS
StB
StB 8.5
PS 2.3
0215700000 50
0180400000 20
StB 8.5
PS 2.3
0215700000 50
0180400000 20
Cover/contact sleeve
Marking tags
DEK
K sleeve
AD 4
0303400000 50
BSK M2.5x18 0303300000 100
Print
Standard
DEK 6
see “Accessories”
DEK 5
see “Accessories”
Mounting rails, end brackets, further marking material see “Accessories”
1) The conductor cross-section is reduced to max. 2.5 mm2
when QB is used.
K sleeve
0553300000 100
DEK 6.5
see “Accessories”
* With contact sleeve 19 A
171
Feed-through terminals
Screw connection
Solder connection
Tab connection
Spring-clip connection
AKA 2.5
ADK 1
ADK 1 F
ADK 3 F
ADK 1 S
ar
6/20/31
7,8
9 mm/M 2.5/3.5 x 0.6
ar
6/22/36.5
8,4
9 mm/M 3.5/3.5 x 0.6
ar
6/22/36.5
8.5/7.5
11 mm/M 2.5/3.5 x 0.6
ar
6/22/36.5
8,4
–
400 V/20 A/2.5/1.5 mm2
6 kV/3
400 V/16 A/4/1.5 mm2
6 kV/3
400 V/20 A/2.5/1.5 mm2
6 kV/3
400 V/16 A/2.5/1.5/1 mm2
6 kV/3
0.4
1
0.5…1.0
2
0.4…0.6
1
–
–
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.13...2.5 / A2
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13...2.5 / A3
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.13...2.5 / A2
0.5...2.5 / -
10
10
300 V/20 A/26…12 AWG
300 V/10 A/24…12 AWG
Cat. No. 1.5
Qty.
300 V/10 A/26…12 AWG
300 V/15 A/26…12 AWG
1.5
Qty. 2.5
Qty.
300 V/20 A/26…14 AWG
300 V/15 A/22…14 AWG
1.5
Qty. 2.5
Qty.
300 V/18 A/12 AWG max.
300 V/3 A/–
1.5
Qty. 2.5
Qty.
0303860000100 0301060000100
0476060000100 0478660000100
acc. to DIN 41 611 Part 4
Wrap connection
acc. to DIN/IEC 352 Part 1
Dimensions/approvals
Width/length/height with Pins (mm)
Length solder tag/pin (mm)
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Max. clamping range in mm2/plug gauge acc. to IEC 60 947-1 Size
Continuous current rating of cross-connection 2-pole
A
Continuous current rating of cross-connection multipole
A
Rated data according to UL/CSA
Voltage/current/conductor size
UL
Voltage/current/conductor size
CSA
Ordering data
Version
for plate thickn. mm
PA
KrG
Pin 1.0x1.0
Pin 0.8x1.6
FS 1x6.3 slotted/0.8x2.8
0300720000
100
0476160000100 0478560000100
12-pole PA
End plate (thickness mm)
KrG
PA
EP
Type
AP (3)
Cat. No.
Qty.
0162520000 100
Type
Cat. No.
Qty.
Type
AP (3)
0476260000 50
TW (0.5)
0442300000 50
PS 2.3
0180400000 20
Cat. No.
Qty.
Type
Cat. No.
Qty.
AP (3)
AP (3)
0476260000 50
0360000000 20
AP (3)
0476260000 50
TW (0.5)
0442300000 50
TW (0.5)
0442300000 50
Spacer (thickness mm)
KrG
KrG
ZP (1.5)
ZP (2.5)
0240720000 50
0288520000 20
Partition (thickness mm)
TW
Test plug/socket
StB
Plug test socket ø 2.3
PS
Fuse pin/insulation sleeve/expansion rivet
SST 1.2
0306600000
SST 1.2
IH 2.8
0306600000
0386060000 100
SST 1.2
IH 2.8
0306600000
0386060000 100
SST 1.2
IH 2.8
IH 6.3
030660
0386060000 100
0386260000 100
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
DEK 6
see “Accessories”
IH
Marking tags
DEK
Print
Standard
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain
the rated voltage.
172
Feed-through terminals
ADK 1 T
AKZ 2.5 K
ADK 1 FT
MK 2/12
ar
6/22/50.5
19.5…21.9
9 mm/M 3/3.5 x 0.6
ar
5/26/45.5
22.4…23.6
7 mm/M 2.5/3.0 x 0.5
r
6/22/52
24
11 mm/M 2.5/3.5 x 0.6
ar
86/15/23
8
5
400 V/8 A/4 mm2
6 kV/3
250 V/8 A/2.5 mm2
4 kV/3
250 V/10 A/2.5 mm2
4 kV/3
63 V/20 A/2.5/1.5 mm2
1.5 kV/3
0.5…1.0
2
0.4…0.6
1
0.4…0.6
1
0.4…0.45
1
0.5…4
1.5…4
0.5…4
0.5…2.5
0.5…2.5
0.13...4.0 / A3
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.13...2.5 / A2
0.5…2.5
1.5…2.5
0.5…2.5
0.5…1.5
0.5…1.5
0.33...2.5 / A2
0.5…2.5
1.5…2.5
0.5…2.5
0.5…2.5
0.5…2.5
0.2...2.5 / A2
10
10
300/250 V/10 A/26…12 AWG
300 V/15 A/26…12 AWG
1.5
Qty. 2.5
Qty.
300/250 V/10 A/22…12 AWG
300 V/10 A/26…10 AWG
Cat. No.
Qty.
0109160000 solder tag 100
300 V/3 A/22…14 AWG
Cat. No. 1.5
Qty.
300 V/10 A/24…12 AWG
300 V/10 A/24…12 AWG
Cat. No.
Qty.
0372260000 100
0366360000 100
0108960000
0176960000
100
100
0241460000
Type
Cat. No.
Qty.
Type
AP (3)
0476260000 50
TW (0.5)
Cat. No.
Qty.
Type
AP (3)
0697260000 50
AP (3)
0476260000 50
0442300000 50
TW (1.5)
0318560000 20
TW (0.5)
0442300000 50
PS 2.3
0180400000 20
PS 2.3
StB 8.5
0180400000 20
0215700000 50
SST 1.2
0306600000
SST 1.2
0306600000
IH 2.8
0386060000 100
Cat. No.
Qty.
Type
SN
DEK 6
see “Accessories”
DEK 5
see “Accessories”
DEK 6
SAK-series
0109160000 solder tag
see “Accessories”
50
Cat. No.
Qty.
0200100000 500
BSTb 28/12 024570…
BSTo 28/12 024560…
50
50
173
Rack-mounted interface systems
Dimensions
Width/length/height (mm)
Hole spacing/mounting dimensions
mm
Insulation stripping length/clamping screw/screwdriver blade
Rated data
Rated voltage*/current/cross-section
Rated impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range
Nm
Torque setting with electric screwdriver type DMS 2
Clampable conductor
Solid H07V-U
mm2
Stranded H07V-R
mm2
Flexible H07V-K
mm2
Flexible H07V-K and ferrule DIN 46 228/1
mm2
Flexible H07V-K and ferrule with plastic insul. collar
mm2
Plug gauge acc. to IEC 60 947-1
Size
Ordering data
Pin 1.0 x 1.0
Pin 0.8 x 2.8 (push-on), unprinted
Pin 0.8 x 2.8 (push-on), printed, 1…32
Pin 0.8 x 2.8 (push-on), printed, 1…32, blue
6 x plug (6.3 x 0.8)
6 x plug (6.3 x 0.8), blue
6 x plug (6.3 x 0.8), bzw. 12 x 2.8 x 0.8 slotted
6 x plug (6.3 x 0.8), bzw. 12 x 2.8 x 0.8 slotted, blue
3 x plug (6.3 x 0 . 8) /1 x solder per pole
3 x plug (6.3 x 0 . 8) /1 x solder per pole, blue
3 x plug (6.3 x 0.8 bzw. 6 x 2.8 x 0.8)/1 x solder
3 x plug (6.3 x 0.8 bzw. 6 x 2.8 x 0.8)/1 x solder, blue
2 x direct connection, 1 x Pin 0.8 x 1.6
Version
PA
PA
PA
PA
KrG
KrG
KrG
KrG
KrG
KrG
KrG
KrG
PA
TOP 1.5 F/32
SP 10 FF2)
SP 10 LF3)
SP 60 FF2)
SP 60 LF3)
SP 90 FF2)
SP 90 LF3)
40.2/110.6/29.5
101.6/20.3
10 mm/M 2.5/3.5 x 0.6
42/46.5/170/28
147
40/45.5/162.5/110
151/90
40/45.5/228.5/110
217/90
250* V/6 A/1.5/1 mm2
4 kV/3
1000* V/16 A/2.5/1.5 mm2
6 kV/3
400* V/16 A/2.5/1.5 mm2
6 kV/3
400* V/16 A/2.5/1.5 mm2
6 kV/3
0.4…0.7
1
0.5…2.5
1.5
0.5…1.5
0.5…1.5
0.5…1.5
A1
Type
Cat. No.
Qty.
TOP 1.5 F/32 04431600001) 5
Type
SP 10 FF
Cat. No.
Qty.
0456220000 10
Type
Cat. No.
SP 60 FF 4)
SP 60 FF 4)
SP
SP
SP
SP
60
60
60
60
LF 4)
LF 4)
LF 5)
LF 5)
Qty.
0340320000 1
0340370000 1
0343720000
0343770000
0124520000
0124570000
1
1
1
1
Type
Cat. No.
Qty.
SP 90 FF**
0248120000 1
SP 90 FF**
0608920000 1
SP 90 LF**
0248220000 1
printed:
** A ...F / 1...15
printed:
4) A...F / 1...10
5) 00...50 / 1...10
Insulation sleeves
Marking tags
dekafix
Type
IH 2.8
Cat. No.
Qty.
0386060000 100
Print
for group markers
Type
IH 2.8
IH 6.3
Cat. No.
Qty.
0386060000 100
0386260000 100
FW 5
see “Accessories”
Type
IH 2.8
IH 6.3
Cat. No.
Qty.
0386060000 100
0386260000 100
Type
IH 2.8
IH 6.3
Cat. No.
Qty.
0386060000 100
0386260000 100
Mounting rails, end brackets, further marking material see “Accessories”
* Insulation sleeves are to be used for tab connections to maintain the rated voltage.
174
1)
Rated voltage 125 V
2)
3)
FF = Tab- Tab
LF = Solder - Tab
Rack-mounted interface systems
RV 8/8 long
RV 8/9 long
RV 8/8 short
Technical data acc. to VDE
125 V/–/–
Pin versions (intern)
0.8 x 2.4/1 x 1
0.8 x 2.4/0.8 x 2.4
Plug adapter
1-pole
RV 8/9 short
125 V/–/–
Type
Cat. No.
Qty.
0468860000 1
0468960000 1
Type
Cat. No.
Qty.
0467160000 1
0467260000 1
Type
DSA 1
Cat. No.
Qty.
0576060000 50
Type
DSA 1
Cat. No.
Qty.
0576060000 50
105 V/–/–
Type
Cat. No.
Qty.
0498960000 1
0499060000 1
with shield pins
Type
Cat. No.
Qty.
DSA 1
0576060000 50
125 V/–/–
Type
Cat. No.
Qty.
0444060000 1
0545960000 1
with shield pins
Type
Cat. No.
Qty.
DSA 1
0576060000 50
RV 8/20 short
SAK-series
for connection of solid and flexible conductors from 0.75 to
1.5 mm2 directly on to the pins of the interface system.
RV 8/56 short
Technical data acc. to VDE
125 V~/–/–
Pin versions (internal)
0.8 x 2.4/1 x 1
0.8 x 2.4/0.8 x 2.4
125 V~/–/–
Cat. No.
Qty.
0544460000
Cat. No.
0462260000
0533060000
1
Qty.
1
4
Additional versions on request
Size A
Type
in mm
RV 8/8 K
81
RV 8/9 K
89
RV 8/8 L
93
RV 8/9 L
100
RV 8/20 K
187,62/31.5
RV 8/56 K
460/31.5
(K = short/L = long)
Cat. No.
0468860000
0468960000
0467160000
0467260000
0119360000
0544460000
0462260000
0533060000
RV
8/8 L
8/8 L
8/8 K
8/8 K
8/20 K
8/20 K
8/56 K
8/56 K
Size B
in mm
40.64
40.64
40.64
40.64
63
63
a
26
26
26
26
26
26
26
26
b
20
26
20
26
20
26
20
26
c
200
206
84
89
84
89
84
89
Mounting rails, end brackets, further marking material see “Accessories”
175