Advanced Monolithic Systems AMS04/AMS05 VOLTAGE REFERENCES FEATURES APPLICATIONS • Low Temperature Coefficient • Wide Operating Current Range AMS04…………………….15µ µ A to 20mA AMS05…………………….20µ µ A to 20mA • Max. 1Ω Ω Dynamic Impedance • Typ. 2% Output tolerance • Battery Powered Systems • Instrumentation • A/D, D/A Converters • Current sources • Power Supplies • Telecommunication GENERAL DESCRIPTION The AMS04 and the AMS05 are two-terminal, band-gap voltage reference diodes, with an output voltage of 1.25V for the AMS04 and 2.5V for the AMS05. These devices feature low dynamic impedance and good temperature coefficient, operating over a wide current range. Since the band-gap reference of these devices uses only transistors and resistors, low noise and good long term stability result. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The AMS04 and AMS05 can be used for portable meters, regulators, data acquisition converters and telecommunication. The AMS04 and AMS05 are operational over a temperature range of 0°C to 70°C and are available in TO-92 and SO-8 packages. ORDERING INFORMATION: MAX. TEMPCO 50ppm/°C 100ppm/°C 50ppm/°C 100ppm/°C PACKAGE TYPE TO-92 AMS04AN AMS04BN AMS05AN AMS05BN 8 LEAD SOIC AMS04AS AMS04BS AMS05AS AMS05BS OPERATING TEMPERATURE RANGE 0 to 70°C 0 to 70°C 0 to 70°C 0 to 70°C PIN CONNECTIONS TO-92 Plastic Package (N) + - 2 1 SO-8 SO Package (S) N/C N/C 8 7 1 2 + 6 N/C 5 3 4 - N/C N/C N/C Bottom View Advanced Monolithic Systems, Inc. Top View 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS04/AMS05 ABSOLUTE MAXIMUM RATINGS Reverse Current 30mA Forward Current 10mA Operating Temperature Range 0°C to 70°C Storage temperature -55°C to +150°C Soldering information TO-92 package: 10 sec. SOIC package: Vapor phase (60 sec) Infrared (15 sec.) 260°C 215°C 220°C ELECTRICAL CHARACTERISTICS Electrical Characteristics at IR = 100 µA, and TA = +25°C unless otherwise specified. Parameter Conditions Reverse Breakdown Voltage IR = 100 µA Reverse Dynamic Impedance IR = 100 µA Reverse Breakdown 15µA ≤IR ≤20mA 20µA ≤IR ≤1mA Min 1.235 AMS04 Typ 1.250 Max 1.265 AMS05 Typ Min 2.475 2.50 1 10 0.25 10 Wide Band Noise 10Hz ≤ f ≤ 10kHz Temperature Coeff. AMS04A/AMS05A AMS04B/AMS05B IR = 100 µA (Note 3) V 1 Ω mV 10 0.25 Min. Operating Current Units 2.525 20 1.0 20µA ≤IR ≤20mA 25µA ≤IR ≤1mA Voltage Change Max 60 2.0 1.0 mV 20 µA µV 60 50 100 50 100 ppm/°C Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Note 2: For elevated temperature operation, TJ max is +100°C Thermal Resistance TO-92 ϕ JA (junction to ambient) 170°C/W (0.125” leads) SO-8 165°C/W Note 3: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating TMAX and TMIN, divided by TMAX - TMIN. The measured temperatures are 0°C, 25°C and 70°C. TYPICAL APPLICATIONS Precision Current Source Battery Powered 1.25V Reference 10V Reference AMS04 +15V 9V 50k 3 +15V 81kΩ 2 - + + 7 360kΩ LM312 2 1.2V 7 - 6 VOUT = 10V 4 6 LM312 3 1µF AMS04 4 180kΩ AMS05 IOUT* * IOUT = RSET 60kΩ 0.1µF 1.25V RSET Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 AMS04/AMS05 TYPICAL PERFORMANCE CHARACTERISTICS AMS04 Reverse Characteristics 1.2 6 4 2 0 FORWARD VOLTAGE (V) TA =25° C TA =25° C 8 10 1 0.8 0.1 1 10 REVERSE CURRENT (mA) 100k 0.5 0 OUTPUT ~ ~ ~ ~ 10 INPUT 0 0 200 400 TIME (µs) Reverse Characteristics TA =25° C TA =25° C 12 8 4 0 10 1 0.1 -4 0.01 600 0.1 1 10 100 FORWARD CURRENT (mA) 100 16 0.1 1 10 REVERSE CURRENT (mA) AMS05 Forward Characteristics 0 100 0.5 1.0 2.5 1.5 2.0 REVERSE VOLTAGE (V) AMS05 Response Time 1.6 3.0 TA =25° C OUTPUT VOLTAGE SWING (V) FORWARD VOLTAGE (V) 0.01 REVERSE CURRENT (µA) INPUT OUTPUT VOLTAGE CHANGE (mV) OUTPUT 1.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 REVERSE VOLTAGE (V) AMS05 Reverse Characteristics AMS04 Response Time 2.0 1.5 0 0 100 TA =25° C 0.4 0.1 -2 0.01 VOLTAGE SWING (V) AMS04 Forward Characteristics 100 REVERSE CURRENT (µA) OUTPUT VOLTAGE CHANGE (mV) AMS04 Reverse Characteristics 10 1.2 0.8 0.4 0 2.0 INPUT 100k OUTPUT 1.0 0 ~ ~ ~ ~ 10 INPUT 0 0.01 0.1 1 10 100 FORWARD CURRENT (mA) Advanced Monolithic Systems, Inc. 0 200 400 TIME (µs) 600 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140 3.0 AMS04/AMS05 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted. 3 LEAD TO-92 PLASTIC PACKAGE (N) 0.180±0.005 (4.572±0.127) 0.060±0.005 (1.524±0.127) DIA 0.060±0.010 (1.524±0.254) 0.90 (2.286) NOM 0.180±0.005 (4.572±0.127) 0.140±0.010 (3.556±0.127) 5° NOM 0.500 (12.70) MIN 0.050 (1.270) MAX UNCONTROLLED LEAD DIMENSIONS 0.015±0.002 (0.381±0.051) 0.016±0.003 (0.406±0.076) 0.050±0.005 (1.270±0.127) 10° NOM N (TO-92 ) AMS DRW# 042391 8 LEAD SOIC PLASTIC PACKAGE (S) 0.189-0.197* (4.801-5.004) 8 7 6 5 0.228-0.244 (5.791-6.197) 0.150-0.157** (3.810-3.988) 1 2 3 4 0.010-0.020 x 45° (0.254-0.508) 0.053-0.069 (1.346-1.752) 0.004-0.010 (0.101-0.254) 0.014-0.019 (0.355-0.483) 0.008-0.010 (0.203-0.254) 0.050 (1.270) TYP 0°-8° TYP 0.016-0.050 (0.406-1.270) S (SO-8 ) AMS DRW# 042293 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140