SN54F153, SN74F153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993 • • • • SN54F153 . . . J PACKAGE SN74F153 . . . D OR N PACKAGE (TOP VIEW) Permits Multiplexing From N Lines to One Line Performs Parallel-to-Serial Conversion Strobe (Enable) Line Provided for Cascading (N Lines to N Lines) Package Options Include Plastic Small-Outline Packages, Ceramic Chip Carriers, and Standard Plastic and Ceramic 300-mil DIPs 1G B 1C3 1C2 1C1 1C0 1Y GND description These data selectors/multiplexers contain inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate strobe (G) inputs are provided for each of the two 4-line sections. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 2G A 2C3 2C2 2C1 2C0 2Y B 1G NC VCC 2G SN54F153 . . . FK PACKAGE (TOP VIEW) The SN54F153 is characterized for operation over the full military temperature range of – 55°C to 125°C. The SN74F153 is characterized for operation from 0°C to 70°C. 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 A 2C3 NC 2C2 2C1 1Y GND NC 2Y 2C0 1C3 1C2 NC 1C1 1C0 NC – No internal connection FUNCTION TABLE INPUTS SELECT DATA STROBE G OUTPUT Y B A C0 C1 C2 C3 X X X X X X H L L L L X X X L L L L H X X X L H L H X L X X L L L H X H X X L H H L X X L X L L H L X X H X L H H H X X X L L L H H X X X H L H Select inputs A and B are common to both sections. Copyright 1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–1 SN54F153, SN74F153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993 logic symbol† A B 1G 1C0 1C1 1C2 1C3 2G 2C0 2C1 2C2 2C3 14 2 0 1 1 6 5 4 3 EN G 0 3 MUX 0 7 1 2 3 15 10 9 11 12 13 † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. Pin numbers shown are for the D, J, and N packages. 2–2 1Y POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2Y SN54F153, SN74F153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993 logic diagram (positive logic) 1G 1C0 1C1 1 6 5 7 1Y Data 1 1C2 1C3 B 4 3 2 Select A 2C0 2C1 14 10 11 Data 2 9 2C2 12 2Y 13 2C3 2G 15 Pin numbers shown are for the D, J, and N packages. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–3 SN54F153, SN74F153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V Input voltage range (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 1.2 V to 7 V Input current range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA Voltage range applied to any output in the high state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to VCC Current into any output in the low state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA Operating free-air temperature range: SN54F153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C SN74F153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input voltage rating may be exceeded provided that the input current rating is observed. recommended operating conditions SN54F153 VCC VIH Supply voltage VIL IIK Low-level input voltage IOH IOL High-level output current Low-level output current TA Operating free-air temperature High-level input voltage SN74F153 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 2 2 Input clamp current – 55 UNIT V V 0.8 0.8 V – 18 – 18 mA –1 –1 mA 20 20 mA 70 °C 125 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH VOL II IIH IIL IOS§ ICC TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V, II = – 18 mA IOH = – 1 mA VCC = 4.75 V, VCC = 4.5 V, IOH = – 1 mA IOL = 20 mA VCC = 5.5 V, VCC = 5.5 V, VI = 7 V VI = 2.7 V VCC = 5.5 V, VCC = 5.5 V, VI = 0.5 V VO = 0 SN54F153 TYP‡ MAX MIN SN74F153 TYP‡ MAX MIN – 1.2 2.5 3.4 – 1.2 2.5 3.4 – 60 0.5 0.5 V 0.1 0.1 mA 20 20 µA – 0.6 – 0.6 mA –150 mA 20 mA –150 0.3 – 60 VCC = 5.5 V, VI = 0 12 20 12 ‡ All typical values are at VCC = 5 V, TA = 25°C. § Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second. 2–4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 V V 2.7 0.3 UNIT SN54F153, SN74F153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993 switching characteristics (see Note 2) PARAMETER FROM ((INPUT)) TO (OUTPUT) ( ) VCC = 5 V, CL = 50 pF, RL = 500 Ω, TA = 25°C VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX† ′F153 tPLH tPHL A or B Y tPLH tPHL G Y tPLH tPHL C Y UNIT SN54F153 SN74F153 MIN TYP MAX MIN MAX MIN 3.7 7.7 10.5 3.7 14 3.7 12 2.7 6.6 9 2.7 11 2.7 10.5 3.7 6.7 9 3.7 11.5 3.7 10.5 2.2 5.3 7 1.7 9 1.7 8 2.2 4.9 7 1.7 9 2.2 8 2.2 4.7 6.5 1.7 8 1.7 7.5 MAX ns ns ns † For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. NOTE 2: Load circuits and voltage waveforms are shown in Section 1. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–5 SN54F153, SN74F153 DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993 2–6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1998, Texas Instruments Incorporated