ALSC ASM1816-20

ASM1816
February 2005
rev 1.4
Low Power 3.3V/3.0V µP Reset, Active LOW, Open-Drain Output
General Description
Applications
The ASM1816 is a voltage supervisory device with low-power,
•
Set-top boxes
3.3V/3V µP Reset, active LOW, open-drain output. Maximum
•
Cellular phones
supply current over temperature is a low 15µA (at 3.6V).
•
PDAs
•
Energy management systems
The ASM1816 generates an active LOW reset signal whenever
•
Embedded control systems
the monitored supply is out of tolerance. A precision reference
•
Printers
and comparator circuit monitor power supply (VCC) level.
Tolerance level options are 5%, 10% and 20%. When an out-of-
•
Single board computers
tolerance condition is detected, an internal power-fail signal is
Typical Application
generated which forces an active LOW reset signal. After VCC
returns to an in-tolerance condition, the reset signal remains
VCC
active for 150ms to allow the power supply and system
microprocessor to stabilize.
ASM1816
The ASM1816 is designed with a open-drain output stage and
Microprocessor
operates over the extended industrial temperature range.
Devices are available in TO-92 and compact surface mount
RESET
SOT-23 packages.
RESET
GND
Other low power products in this family include the ASM1810/
11/12/15/17, ASM1233D and ASM1233M.
Key Features
•
Block Diagram
Low Supply Current
VCC
2
•20 µA maximum (5.5 V)
•15µA maximum (3.6 V)
•
Automatically restarts a microprocessor after power failure
•
150ms reset delay after VCC returns to an in-tolerance con-
ASM1816
Supply
Tolerance
Bias
1
dition
+
•
Active LOW power-up reset
-
•
Precision temperature-compensated voltage reference and
comparator
•
Eliminates external components
•
TO-92 and compact surface mount SOT-23 package
•
Operating temperature -40°C to +85°C
5.0KΩ
Delay
150ms
Typical
Reference
3
GND
Alliance Semiconductor
2575 Augustine Drive . Santa Clara, CA 95054 . Tel: 408.855.4900 . Fax: 408.855.4999 . www.alsc.com
Notice: The information in this document is subject to change without notice
RESET
ASM1816
February 2005
rev 1.4
Pin Configuration
TO-92
SOT-23
RESET
ASM1816
1
ASM1816-R
VCC
3
GND
2
1
2
3
Pin Description
TO-92
SOT-23
Pin #
Pin #
1
Pin Name
Description
1
RESET
Active LOW reset output
2
2
VCC
Power supply input
3
3
GND
Ground
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
2 of 9
ASM1816
February 2005
rev 1.4
VCCTP (MAX)
Operation - Power Monitor
The
ASM1816
detects
tF
VCC
Application Information
out-of-tolerance
power
VCCTP
supply
VCCTP (MIN)
conditions. It resets a processor during power-up, powermonitored power supply voltage is below the reset threshold.
When an out-of-tolerance VCC voltage is detected, the
RESET
RESET signal is asserted. On power-up, RESET is kept
tRPD
~
~
down and issues a reset to the system processor when the
active (LOW) for approximatley 150ms after the power supply
voltage has reached the selected tolerance. This allows the
power supply and microprocessor to stablize before RESET
is released.
VOL
tR
Figure 2: Timing Diagram: Power-Down
VCCTP (MAX)
VCCTP (MIN)
~
VCC
VCCTP
tRPU
VOH
~
RESET
Figure 1: Timing Diagram: Power-Up
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
3 of 9
ASM1816
February 2005
rev 1.4
Absolute Maximum Ratings
Parameter
Min
Max
Unit
Voltage on VCC
-0.5
7
V
Voltage on RESET
-0.5
VCC + 0.5
V
Operating Temperature Range
-40
85
°C
260
°C
125
°C
2
200
KV
V
Soldering Temperature (for 10 sec)
Storage Temperature
-55
ESD rating
HBM
MM
NOTE: These are stress ratings only and functional use is not implied. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability.
Electrical Characteristics
Unless otherwise noted, VCC = 1.2V to 5.5V and specifications are over the operating temperature range of -40°C to +85°C. All voltages are referenced to
ground
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
5.5
V
Supply Voltage
VCC
Output Current
IOL
Output = 0.4V, VCC > 2.7V
Operating Current
ICC
VCC < 5.5V, RESET output open
8
20
µA
Operating Current
ICC
VCC < 3.6V, RESET output open
6
15
µA
1.2
+10
mA
VCC Trip Point (ASM1816R-5)
VCCTP
2.98
3.06
3.15
V
VCC Trip Point (ASM1816R-10)
VCCTP
2.80
2.88
2.97
V
VCC Trip Point (ASM1816R-20)
VCCTP
2.47
2.55
2.64
V
RP
3.5
5.5
7.5
kΩ
10
pF
5
µs
Internal Pull-up Resistor
Output Capacitance
COUT
VCC Detect to RESET Low
tRPD
VCC Slew Rate
(VCCTP (MAX) to VCCTP (MIN)
VCC Slew Rate
(VCCTP (MIN) to VCCTP (MAX)
VCC Detect to RESET High
2
tF
300
µs
tR
0
ns
tRPU
tr = 5µs
100
150
250
ms
Note: The tF value is for reference in defining values for tRPD and should not be considered for proper operation or use.
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
4 of 9
ASM1816
February 2005
rev 1.4
Family Selection Guide
Part #
RESET Voltage (V)
RESET Time
(ms)
Output Stage
RESET Polarity
ASM1810
4.620, 4.370, 4.120
150
Push-Pull
LOW
ASM1811
4.620, 4.350, 4.130
150
Open-Drain
LOW
ASM1812
4.620, 4.350, 4.130
150
Push-Pull
HIGH
ASM1815
3.060, 2.880, 2.550
150
Push-Pull
LOW
ASM1816
3.060, 2.880, 2.550
150
Open-Drain
LOW
ASM1817
3.060, 2.880, 2.550
150
Push-Pull
HIGH
ASM1233D
4.625, 4.375, 4.125
350
Open-Drain
LOW
ASM1233M
4.625, 4.375, 2.720
350
Open-Drain
LOW
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
5 of 9
ASM1816
February 2005
rev 1.4
Package Dimension
Plastic SOT-23 (3-Pin)
D
B
E
H
e
S
A
a
C
e1
A1
L
Inches
Millimeters
Min
Max
Min
Max
Plastic SOT-23 (3-Pin)
A
0.030
0.046
0.75
1.17
A1
0.002
0.006
0.05
0.15
B
0.012
0.020
0.30
0.50
C
0.003
0.008
0.08
0.20
D
0.110
0.120
2.80
3.04
E
0.047
0.055
1.20
1.40
e
0.037 BSC
0.95 BSC
e1
0.075 BSC
1.9 BSC
H
0.083
0.104
2.10
2.64
L
0.016
0.024
0.40
0.60
a
o
0
o
8
o
0
8
S
NA
o
NA
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
6 of 9
ASM1816
February 2005
rev 1.4
To-92 (3-Pin)
Dimensions in Inches
Min
Max
Dimensions in Millimeters
Min
Max
TO-92
A
0.175
0.185
4.445
4.699
b
0.016
0.020
0.406
0.508
C
0.014
0.016
0.356
0.406
φD
0.175
0.185
4.445
4.699
E
0.138
0.144
3.505
3.658
e
0.098
0.102
2.489
2.591
e1
0.045
0.055
1.143
1.397
j
0.168
0.174
4.269
4.420
L
0.500
0.585
12.7
14.86
s
0.095
0.099
2.413
2.515
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
7 of 9
ASM1816
February 2005
rev 1.4
Ordering Information
Device Summary
Part ***
Number
RESET
Output
Voltage
(V)
RESET
Tolerance
(%)
RESET
Time
(ms)
Open-Drain **
Output Stage
SOT-23
Package
RESET
Polarity
Package Marking
TIN - LEAD DEVICES
ASM1816R-5
3.06
5
150
‹
‹
LOW
RMLL
ASM1816R-10
2.88
10
150
‹
‹
LOW
RNLL
ASM1816R-20
2.55
20
150
‹
‹
LOW
ROLL
LEAD FREE DEVICES
ASM1816R-5F
3.06
5
150
‹
‹
LOW
KMLL
ASM1816R-10F
2.88
10
150
‹
‹
LOW
KNLL
ASM1816R-20F
2.55
20
150
‹
‹
LOW
KOLL
Part ***
Number
RESET
Output
Voltage
(V)
RESET
Tolerance
(%)
RESET
Time
(ms)
Open-Drain **
Output Stage
TO-92
Package
RESET
Polarity
Package Marking
TIN - LEAD DEVICES
ASM1816-5
3.06
5
150
‹
‹
LOW
ASM1816-5
ASM1816-10
2.88
10
150
‹
‹
LOW
ASM1816-10
ASM1816-20
2.55
20
150
‹
‹
LOW
ASM1816-20
LEAD FREE DEVICES
ASM1816-5F
3.06
5
150
‹
‹
LOW
ASM1816-5F
ASM1816-10F
2.88
10
150
‹
‹
LOW
ASM1816-10F
ASM1816-20F
2.55
20
150
‹
‹
LOW
ASM1816-20F
** Internal 5.5kΩ resistor pull-up
** *Add /T to Part Number for Tape and Reel (i.e ASM18xx-x/T)
LL - Lot Code
Low Power 3.3V/3.0V µP Reset
Notice: The information in this document is subject to change without notice
8 of 9
ASM1816
Alliance Semiconductor Corporation
2575, Augustine Drive,
Santa Clara, CA 95054
Tel: 408 - 855 - 4900
Fax: 408 - 855 - 4999
www.alsc.com
Copyright © Alliance Semiconductor
All Rights Reserved
Part Number: ASM1816
Document Version: 1.4
© Copyright 2003 Alliance Semiconductor Corporation. All rights reserved. Our three-point logo, our name and Intelliwatt are trademarks or
registered trademarks of Alliance. All other brand and product names may be the trademarks of their respective companies. Alliance reserves the
right to make changes to this document and its products at any time without notice. Alliance assumes no responsibility for any errors that may
appear in this document. The data contained herein represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the
right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these
specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and
users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. Alliance does not assume any responsibility
or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale
and/or use of Alliance products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any
intellectual property rights, except as express agreed to in Alliance's Terms and Conditions of Sale (which are available from Alliance). All sales of
Alliance products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of products from Alliance does not
convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of Alliance or third
parties. Alliance does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may
reasonably be expected to result in significant injury to the user, and the inclusion of Alliance products in such life-supporting systems implies that
the manufacturer assumes all risk of such use and agrees to indemnify Alliance against all claims arising from such use.