AZ DISPLAYS, INC. A DIVISION OF ZE XIAMEN CO., LTD. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM0801B SERIES DATE: October 27, 2004 ACM0801B SERIES LCD MODULE 1.0 MECHANICAL SPECS 1. Overall Module Size 54.0mm(W) x 37.0mm(H) x max 13.0mm(D) for LED backlight version 54.0mm(W) x 37.0mm(H) x max 11.0mm(D) for reflective version 2. Dot Size 0.50mm(W) x 0.60mm(H) 3. Dot Pitch 0.60mm(W) x 0.70mm(H) 4. Duty 1/11 5. Controller IC KS0066 or compatible 6. LC Fluid Options TN, STN 7. Polarizer Options Reflective, Transflective, Transmissive 8. Backlight Options LED or EL 9. Temperature Range Options Standard (0ºC ~ 50ºC), Wide(-20ºC ~ 70ºC) 2.0 ABSOLUTE MAXIMUM RATINGS Item Symbol Min Typ Max Unit Operating temperature (Standard) Top 0 - 50 ºC Storage temperature (Standard) Tst -20 - 70 ºC Operating temperature (Wide temperature) Top -20 - 70 ºC Storage temperature (Wide temperature) Tst -30 - 80 ºC Input voltage Vin Vss Vdd V Supply voltage for logic Vdd- Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 4.6 6.5 V AZ DISPLAYS,INC. 10/27/04 1 ACM0801B SERIES LCD MODULE 3.0 ELECTRICAL CHARACTERISTICS Item Symbol Condition Min Typ Max Unit Input voltage (high) Vih H level 2.2 - Vdd V Input voltage (low) Vil L level 0 - 0.6 V 0ºC - 4.84 5.14 25ºC 4.4 4.7 5.00 50ºC 4.26 4.56 4.86 -20ºC - 5.64 6.14 0ºC - 4.84 - 50ºC - 4.56 - 70ºC 3.7 4.2 - Idd Vdd=5.0V, fosc=270kHz - 0.5 1.0 mA LED Power Supply Voltage Vfled R=6.8Ω - 4.6 5.0 V LED Power Supply Current Ifled R=6.8Ω - 70 175 mA Recommended LC Driving Voltage (Standard Temp) Recommended LC Driving Voltage (Wide Temp) Power Supply Current Vdd - Vo Vdd -Vo V V 4.0 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, TN LC fluid) Item Symbol Condition Min Typ Max Unit Viewing angle (horizontal) θ Cr ≥ 4.0 -25 - - deg Viewing angle (vertical) φ Cr ≥ 4.0 -30 - 30 deg Contrast Ratio Cr φ=0°, θ=0° - 2 - Response time (rise) Tr φ=0°, θ=0° - 120 150 ms Response time (fall) Tf φ=0°, θ=0° - 120 150 ms AZ DISPLAYS,INC. 10/27/04 2 ACM0801B SERIES LCD MODULE 4.1 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, STN LC fluid) Item Symbol Condition Min Typ Max Unit Viewing angle (horizontal) θ Cr ≥ 2.0 -60 - 35 deg Viewing angle (vertical) φ Cr ≥ 2.0 -40 - 40 deg Contrast Ratio Cr φ=0°, θ=0° - 6 - Response time (rise) Tr φ=0°, θ=0° - 150 250 ms Response time (fall) Tf φ=0°, θ=0° - 150 250 ms 5.0 BLOCK DIAGRAM 1,VSS 2,VDD 3,VO 4,RS 5,R/W 6,E SEG1-40 U1 COM1-11 LCD8X1 ~~ 7,DB0 14,DB7 +/A BL+ -/K BL- LED BACKLIGHT 6.0 PIN ASSIGNMENT AZ DISPLAYS,INC. 7.0 POWER SUPPLY 10/27/04 3 ACM0801B SERIES LCD MODULE Pin No. Symbol Function 1 Vss Ground 2 Vdd +5V 3 Vo LCD contrast adjust 4 RS Register select 5 R/W Read / write 6 E Enable 7 DB0 Data bit 0 8 DB1 Data bit 1 9 DB2 Data bit 2 10 DB3 Data bit 3 11 DB4 Data bit 4 12 DB5 Data bit 5 13 DB6 Data bit 6 14 DB7 Data bit 7 +/A BL+ Power Supply for BL+ -/K BL- Power Supply for BL- Vdd Vo +5V Vr Vss STANDARD TEMP RANGE Vdd Vo +5V Vr -5V Vss WIDE TEMP RANGE Vr = 10KΩ ~ 20KΩ 8.0 TIMING CHARACTERISTICS Item Symbol Test Condition Min. Typ. Max. Unit Enable cycle time tC Fig. a, Fig. b 500 - - ns Enable pulse width tW Fig. a, Fig. b 220 - - ns Enable rise/fall time tR , tF Fig. a, Fig. b - - 25 ns RS, R/W set up time tSU Fig. a, Fig. b 40 - - ns RS, R/W hold time tH Fig. a, Fig. b 10 - - ns Data delay time tD Fig. b - - 120 ns Data set up time tDSU Fig. a 60 - - ns Data hold time tDH Fig. a, Fig. b 20 - - ns AZ DISPLAYS,INC. 10/27/04 4 ACM0801B SERIES LCD MODULE RS R/W VIH1 VIH1 VIL1 t SU VIL1 tH V IL1 VIL1 tW tF VIH1 E VIH1 VIL1 tR VIL1 t DSU VIL1 t DH VIH1 VIH1 DB0~DB7 tH Valid Data VIL1 VIL1 tC Fig. a Interface timing (data write) RS VIH1 VIH1 VIL1 t SU VIL1 tH VIH1 VIH1 R/W tW E tF VIH1 VIL1 VIH1 VIL1 tR t DSU tD VIL1 t DH VIH1 DB0~DB7 tH VIH1 Valid Data VIL1 VIL1 tC Fig. b Interface timing (data read) 9.0 MECHANICAL DIAGRAM AZ DISPLAYS,INC. 10/27/04 5 AZ DISPLAYS,INC. ACM0801B SERIES LCD MODULE 10/27/04 AZ DISPLAYS, INC. 6