350MHz High Speed Buffer CORPORATION CLM4125 FEATURES • High Slew Rate. . . . . . . . . . . . . . . . . . . . . . . . . . 3500V/µs • Wide Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . 350MHz Output Current . . . . . . . . . . . . . . . . . . . . . . . 100mA • Peak • No Oscillations with Capacitive Loads • Fully Specified to Drive 50Ω Lines APPLICATIONS • Pulse and Video Amplifier Cable Driver • Coaxial • Video Switching and Routing GENERAL DESCRIPTION The CLM4125 is a high speed unity gain buffers that slew at 3500V/µs, and a small signal bandwidth of 350MHz. This device is ideal to drive a active load CRT amplifier. ORDERING INFORMATION Part Package Temperature Range CLM4125 N CLM4125 M NO8A (Plastic P Dip 8 Lead) -40oC to 85oC MO8B (SOIC 8 Lead) -40oC to 85oC CONNECTION DIAGRAMS Plastic DIP *VVIN N/C *V- Plastic SO 1 8 2 7 3 6 4 5 V-* VOUT V+ *VVIN N/C V-* *V- *Heat-sinking pins. Pin 1 and Pin 8 must be connected to the negative supply. Package NO8A 1 8 2 7 3 6 4 5 V-* VOUT V+ V-* *Heat-sinking pins. Pin 1 and Pin 8 must be connected to the negative supply. Package MO8B CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025 CLM4125 CORPORATION ABSOLUTE MAXIMUM RATINGS (Note 1) ESD Tolerance (Note 3). . . . . . . . . . . . . . . . . . . . . . . ±2000V Thermal Resistance (θJA) (Note 6) N Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50oC/W M Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60oC/W Maximum Junction Temperature . . . . . . . . . . . . . . . . . . 150oC Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±Vsupply Storage Temperature Range . . . . . . . . . . . . -65oC to +150oC Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . 260oC Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . (Note 4) DC ELECTRICAL CHARACTERISTICS The following specifications apply for Supply Voltage = +12, -10V, VCM = 0, RL ≥ 100KΩ and RS = 50Ω unless otherwise noted. Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25oC. SYMBOL CHARACTERISTICS TYP Limit (Note 5) UNITS CONDITIONS RL = 1K, VIN = ±10V AV1 Voltage Gain 1 0.99 0.96 AV2 Voltage Gain 2 0.92 0.89 AV3 Voltage Gain 3 0.92 0.89 VOS Offset Voltage 10 15 25 mV Max RL = 1K IB Input Bias Current 1 5 7 µA Max RL = 1KΩ, RS = 10kΩ, RIN Input Resistance 0.3 MΩ CIN Input Capacitance 3.5 pF RO Output Resistance 3 5 10 Ω Max IS1 Supply Current 1 20 30 30 mA Max VO1 Output Swing 1 11 9 VO2 Output Swing 2 9 8 VO3 Output Swing 3 9 8 V/V Min RL = 100Ω, VIN = ±10V RL = 50Ω, VIN = ±5V ±V Min RL = 50Ω IOUT = ±10mA RL = ∞ RL = 1K RL = 100Ω VPP Min RL = 50Ω CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025 CLM4125 CORPORATION AC ELECTRICAL CHARACTERISTICS The following specifications apply for Supply Voltage = +12, -10V, VCM = 0, RL ≥ 100KΩ and RS = 50Ω unless otherwise noted. Boldface limits apply for TA = TJ = TMIN to TMAX; all other limits TA = TJ = 25oC. SYMBOL SR1 CHARACTERISTICS Slew Rate 1 TYP Limit (Note 5) 3500 3000 UNITS CONDITIONS VIN = ±4.5V, RL = 100Ω (Note 2) V/µs 2250 2000 VIN = ±4V, RL = 50Ω (Note 2) Small Signal Bandwidth 350 300 VIN = ±100mVPP, RL = 50Ω CL ≤ 10pF LSBW Large Signal Bandwidth 140 120 VOUT = ±4.5V, RL = 100Ω CL ≤ 10pF PBW Power Bandwidth 130 110 VIN = ±4V, CL ≤ 100pF t r, t f Rise Time Fall Time 2.5 3.5 t pd Propagation Delay Time OS Overshoot SR2 Slew Rate 2 SSBW MHz ns CL ≤ 100pF VO = 4VPP 2.0 ns RL = 50Ω, CL ≤ 10pF VO = 4VPP 3 % RL = 50Ω, CL ≤ 10pF VO = 100mVPP Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not apply when operating the device beyond its rated operating conditions. Note 2: Slew rate is measured with 50Ω source impedance at 25oC. For accurate measurements, the input slew rate should be at least 5000V/µs. Note 3: The test circuit consists of the human body model of 120pF in series with 1500Ω. Note 4: The maximum power dissipation is a function of T J(max), θJA and TA. The maximum allowable power dissipation at any ambient temperature is PD = (T J(max) - TA)/θJA. Note 5: Limits are guaranteed by testing, correlation or periodic characterization. Note 6: For M & N package, θJA is measured by soldering the unit directly on a printed circuit board and V - pins are connected to 2 square inches of 2 oz copper. CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025 CLM4125 CORPORATION TYPICAL PERFORMANCE CHARACTERISTICS FREQUENCY RESPONSE FREQUENCY RESPONSE 20 5 0 GAIN (dB) 0 72 -5 60 RL = 100Ω VIN ≤ 100mV -15 CL ≤ 100pF -20 T = 25˚C j -10 48 36 24 -25 12 0.5 1 2 60 -20 50 RL = 50Ω VIN ≤ 100mV -30 CL ≤ 10pF -35 T = 25˚C j -25 40 30 20 10 0 5 10 20 50 100 200 500 1000 FREQUENCY (MHz) FREQUENCY (MHz) BANDWIDTH (LARGE SIGNAL & POWER) SUPPLY VOLTAGE vs BANDWIDTH -3dB BANDWIDTH (MHz) RL = 100Ω 8 7 VOUT (VP-P ) -15 0.5 1 2 9 RL = 50Ω 6 5 4 3 2 1 0 2 5 10 20 400 380 360 340 320 300 280 260 240 220 200 180 160 140 RL = 100Ω RL = 50Ω 1 50 100 200 400 3 5 7 9 FREQUENCY (MHz) SUPPLY VOLTAGE (±V) SUPPLY VOLTAGE vs SUPPLY CURRENT OUTPUPT VOLTAGE vs SLEW RATE 50 4000 45 3500 RL = 100Ω 40 SLEW RATE (V/µs) SUPPLY CURRENT (±mA) 70 -45 10 1 80 -10 -40 0 5 10 20 50 100 200 500 1000 -30 90 -5 PHASE LAG (DEGREES) 84 PHASE LAG (DEGREES) 5 GAIN (dB) 15 10 35 30 25 20 15 10 3000 2500 2000 1500 RL = 50Ω 1000 500 5 0 0 1 3 5 7 9 SUPPLY VOLTAGE (±V) 1 3 5 7 VOUT (VP-P ) Information furnished by Calogic is believed to be accurate and reliable. However, no responsibility is assumed for its use: nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent rights of Calogic. CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025