Low Leakage Pico Amp Diodes CORPORATION JPAD5 / JPAD10 / JPAD20 / JPAD50 / JPAD100 / JPAD200 SSTPAD5 / SSTPAD10 / SSTPAD20 / SSTPAD50 / SSTPAD100 / SSTPAD200 FEATURES DESCRIPTION Leakage . . . . . . . . . . . . . . . . . . . . . . . . 5 pA (JPAD5) • Low • High Breakdown Voltage . . . . . . . . . . . . . . . -60 V typical • Low Capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 pf The JPAD series is a low leakage, high speed diode used for input protection circuitry and fast switching. These devices are housed in a plastic TO-92 package for automated high speed assembly. The design and processing of this series results in very low leakage and low capacitance making it an excellennt choice vs conventional diodes. APPLICATIONS Impedance Diode Switching • High • High Dynamic Range Log Amps • High Isolation Protection Circuits ORDERING INFORMATION Part Package JPAD5-200 SSTPAD5-200 XPAD5-200 Plastic TO-92 -55oC to +135oC Plastic SOT-23 -55oC to +135oC Sorted Chips in Carriers -55oC to +135oC Temperature Range PIN CONFIGURATION SOT-23 PLASTIC A TO-92 (MODIFIED) C Note: Use only cathode "C" pin. A PRODUCT MARKING (SOT-23) C A C BOTTOM VIEW 5007, 5010 SCHEMATIC DIAGRAM A C SSTPAD5 T05 SSTPAD10 T10 SSTPAD20 T20 SSTPAD50 T50 SSTPAD100 T11 SSTPAD200 T21 JPAD5 / JPAD10 / JPAD20 / JPAD50 / JPAD100 / JPAD200 SSTPAD5 / SSTPAD10 / SSTPAD20 / SSTPAD50 / SSTPAD100 / SSTPAD200 CORPORATION ABSOLUTE MAXIMUM RATINGS (25oC) Forward Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Total Device Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 mW Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC Lead Temperature (1/16" from case for 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300oC ELECTRICAL CHARACTERISTICS (25oC Unless otherwise noted) SYMBOL CHARACTERISTICS MIN TYP MAX UNIT TEST CONDITIONS STATIC IR Reverse Current PAD5 -5 PAD10 -10 PAD20 -20 PAD50 -50 PAD100 -100 PAD200 -200 pA VR = -20 V V IR = -1mA BVR Breakdown Voltage (Reverse) VF Forward Voltage Drop 0.8 1.5 V IF = 5 mA Capacitance 1.5 2.0 pF VR = -5 V, f = 1 MHz -35 -60 DYNAMIC CR NOTE: Product available in surface mount SOT-23 upon request. Contact factory for further information.