• 1N4150-1 AVAILABLE IN JAN, JANTX, AND JANTXV PER MIL-PRF-19500/231 • 1N3600 AVAILABLE IN JAN, JANTX, AND JANTXV PER MIL-PRF-19500/231 • SWITCHING DIODES • HERMETICALLY SEALED • METALLURGICALLY BONDED 1N4150 and 1N4150-1 and 1N3600 • DOUBLE PLUG CONSTRUCTION MAXIMUM RATINGS Junction Temperature: -65°C to +175°C Storage Temperature: -65°C to +175°C Operating Current: 300 mA @ TA = +25°C Derating: 2.0 mA dc/°C Above TL = + 75°C @ L = 3/8” Forward Surge Current: 4A, (tp = 1µs); 0.5A (tp = 1s) ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified. Type V BR V RWM I R1 1 R2 VR = 50 V dc TA = 25°C IR = 10 µA 1N3600 1N4150,-1 C trr VR = 50 V dc VR = 0; f = 1 Mhz; IF = IR = 10 to 100 mAdc TA = 150°C ac signals = 50 mV (p-p) RL = 100 ohms V dc V (pk) µA dc µA dc pF ns 75 75 50 50 0.1 0.1 100 100 2.5 2.5 4 4 FORWARD VOLTAGE LIMITS – ALL TYPES Limits minimum maximum FIGURE 1 DESIGN DATA V F1 V F2 V F3 V F4 V F5 I F = 1 mA dc I F = 10 mA dc I F = 50 mA dc (Pulsed) I F = 100 mA dc (Pulsed) I F = 200 mA dc (Pulsed) V dc V dc V dc V dc V dc 0.540 0.620 0.660 0.740 0.760 0.860 0.820 0.920 0.870 1.000 CASE: Hermetically sealed glass case per MIL-S-19500/231 D0-35 outline. LEAD MATERIAL: Copper clad steel. LEAD FINISH: Tin / Lead THERMAL RESISTANCE: (ROJL): 250 ˚C/W maximum at L = .375 THERMAL IMPEDANCE: (ZOJX): 70 ˚C/W maximum POLARITY: Cathode end is banded. MOUNTING POSITION: Any. 22 COREY STREET, MELROSE, MASSACHUSETTS 02176 PHONE (781) 665-1071 FAX (781) 665-7379 WEBSITE: http://www.cdi-diodes.com E-mail: [email protected] IN4150, IN4150-1 and IN3600 1000 25º C 10 0ºC 15 0º C 10 -65ºC 1 0.1 .3 .4 .5 .6 .7 .8 .9 1.0 VF - Forward Voltage (V) 1.1 1.2 1.3 FIGURE 2 Typical Forward Current vs Forward Voltage 1000 100 150ºC IR - Reverse Current - (µA) IF - Forward Current - (mA) 100 10 100ºC 1 0.1 25ºC .01 -65ºC NOTE : .001 20 40 60 80 100 120 140 Percent of Reverse Working Voltage (%) FIGURE 3 Typical Reverse Current vs Reverse Voltage All temperatures shown on graphs are junction temperatures