Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company NPN SILICON PLANAR EPITAXIAL TRANSISTOR CSC2002 TO-92 Plastic Package Designed for use in Driver Stage of High Voltage Audio Equipments. ABSOLUTE MAXIMUM RATINGS (Ta=25ºC unless specified otherwise) DESCRIPTION Collector Emitter Voltage VALUE 60 SYMBOL VCEO UNITS V Collector Base Voltage VCBO 60 V Emitter Base Voltage VEBO 5 V IC 300 mA Base Current IB 60 mA Collector Power Dissipation PC 600 mW Storage Temperature Tstg Junction Temperature Tj Collector Current ºC - 55 to +150 +150 ºC ABSOLUTE MAXIMUM RATINGS (Ta=25ºC unless specified otherwise) DESCRIPTION Collector Cut Off Current Emitter Cut Off Current DC Current Gain SYMBOL ICBO IEBO hFE (1) TEST CONDITION VCB=60V, IE = 0 MIN TYP VEB=5V, IC = 0 * VCE=1V, IC=50mA 90 VCE=2V, IC=300mA 30 MAX 100 UNITS nA 100 nA 400 Collector Emitter Saturation Voltage VCE (sat) * IC=300mA, IB=30mA 0.6 V Base Emitter Saturation Voltage VBE (sat) * IC=300mA, IB=30mA 1.2 V 0.7 V Base Emitter Voltage VBE * VCE=6V, IC=10mA 0.6 Transition Frequency fT VCE=6V, IC= -10mA, 50 Cob IE=0, VCB=6V, f=1MHz Collector to Base Capacitance MHz 15 pF µ s, Duty Cycle <2% * Pulsed PW <350µ hFE (1) Classification Continental Device India Limited M : 90 - 180, Data Sheet L : 135 - 270, K : 200 - 400 Page 1 of 3 CSC2002 TO-92 Plastic Package TO-92 Plastic Package TO-92 Transistors on Tape and Ammo Pack Dimension With 'L' Uncontrolled B MECHANICAL DATA h T (p) P h h1 Ammo Pack Style h1 Carrier Strip A H3 H2 A H1 C1 Wo W1 L L t LABEL W2 C2 Ho t1 F1 F2 FLAT SIDE 183 W Do 331 F P2 42 Po 1 K 2 D 3 D A A 1 DIM MIN. MAX. A B 4.32 4.45 5.33 5.20 C D E F G H K L C H F 3 2 1 2 SEC AA G F 3 E Solderability Ensured Beyond 'L' ED FE Adhesive Tape on Top Side A1 PIN CONFIGURATION 1. BASE 2. COLLECTOR 3. EMITTER 3.18 4.19 0.41 0.55 0.35 0.50 5 DEG 1.14 1.40 1.14 1.53 12.70 — 1.982 2.082 ITEM SYMBOL BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT FEED HOLE PITCH FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS COMPONENT ALIGNMENT SIDE VIEW COMPONENT ALIGNMENT FRONT VIEW TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION A1 A T P Po HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack SPECIFICATION MIN. NOM. MAX. 4.0 4.8 3.9 REMARKS TOL . 4.8 5.2 4.2 12.7 12.7 %%P1 %%P0.3 P2 6.35 F h h1 W Wo W1 5.08 0 0 18 6 9 %%P0.4 +0.6 -0.2 W2 Ho H1 L Do t F1, F2 H2 H3 | C1 - C2 | (P) 0.5 16 1.0 1.3 CUMULATIVE PITCH ERROR 1.0 mm/20 PITCH TO BE MEASURED AT BOTTOM OF CLINCH AT TOP OF BODY AT TOP OF BODY %%P0.5 %%P0.2 +0.7 -0.5 %%P0.2 %%P0.5 23.25 11.0 4 %%P0.2 1.2 2.54 0.45 t1 0.3 - 0.6 +0.4, -0.1 1.45 3.0 0.22 6N NOTES 1. MAXIMUM ALIGNMENT DEVIATION BETWEEN LEADS NOT TO BE GREATER THAN 0.2 mm. 2. MAXIMUM NON-CUMULATIVE VARIATION BETWEEN TAPE FEED HOLES SHALL NOT EXCEED 1 mm IN 20 PITCHES. 3. HOLDDOWN TAPE NOT TO EXCEED BEYOND THE EDGE(S) OF CARRIER TAPE AND THERE SHALL BE NO EXPOSURE OF ADHESIVE. 4. NO MORE THAN 3 CONSECUTIVE MISSING COMPONENTS IS PERMITTED. 5. A TAPE TRAILER, HAVING AT LEAST THREE FEED HOLES IS REQUIRED AFTER THE LAST COMPONENT. 6. SPLICES SHALL NOT INTERFERE WITH THE SPROCKET FEED HOLES. All diminsions in mm. Packing Detail PACKAGE TO-92 Bulk TO-92 T&A STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt 1K/polybag 2K/ammo box 200 gm/1K pcs 645 gm/2K pcs 3" x 7.5" x 7.5" 12.5" x 8" x 1.8" 5K 2K 17" x 15" x 13.5" 17" x 15" x 13.5" 80K 32K 23 kgs 12.5 kgs Continental Device India Limited Data Sheet Page 2 of 3 Notes CSC2002 TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 [email protected] www.cdilsemi.com CSC2002Rev090102E Continental Device India Limited Data Sheet Page 3 of 3