NEC's InGaAs PIN PD MODULE WITH INTERNAL NR3470MU-CC PREAMPLIFIER FOR 10 Gb/s APPLICATIONS FEATURES DESCRIPTION • InGaAs PIN PHOTO DIODE NEC's NR3470MU-CC is a 10 Gb/s PIN photo diode receiver in a 17-pin mini-butterfly package with an internal preamplifier. This module is ideal as a receiver for SONET OC-192 and Synchronous Digital Hierarchy (SDH) systems, STM-64, and ITU-T recommendations. • INTERNAL GaAs TRANSIMPEDANCE PREAMPLIFIER • RECEIVER FOR 10 Gb/s TRANSMISSION (STM-64, OC-192) • MINIMUM RECEIVER SENSITIVITY Pr = -17 dBm MAX • TRANSIMPEDANCE Zt = 58 dBΩ MIN • 17-PIN MINI-BUTTERFLY PACKAGE WITH SINGLE MODE FIBER • AC COUPLED-DIFFERENTIAL OUTPUT • WITH SC-UPC CONNECTOR ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C, VSS = -5.2 V, Vpin = +5 V, λ = 1550 nm, unless otherwise specified) PART NUMBER SYMBOLS ID PARAMETERS AND CONDITIONS Dark Current NR3470MU-CC UNITS MIN nA A/W 0.75 TYP MAX 5 10 S Sensitivity Pr Minimum Receiver Sensitivity PRBS = 231 -1, BER = 10-12 dBm 0.80 PO Overload 10.66 Gb/s, NRZ dBm 0 +1 9.0 -18 -17 fc Cut-off Frequency, RL = 50 Ω, -3 dB GHz 7.5 Zt Transimpedance, RL = 50 Ω dBΩ 58 60 -5.46 -5.2 -4.94 90 130 VSS IC Supply Voltage V ISS IC Supply Current mA Optical Return Loss dB ORL 27 California Eastern Laboratories NR3470MU-CC ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS1 (TC = 25°C, unless otherwise specified) SYMBOLS PARAMETERS UNITS RATINGS IF PIN PD Forward Current mA 5 VR PIN PD Reverse Voltage V 20 IR PIN PD Reverse Current mA 2.0 VSS IC Supply Voltage V -6 to 0 TC Operating Case Temperature °C -5 to +75 TSTG Storage Temperature °C -40 to +85 TSLD Lead Soldering Temperature (10 s) °C 260 PART NUMBER AVAILABLE CONNECTOR NR347OMU-CC-AZ* With SC-UPC Connector *NOTE: Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Infomation. Note: 1. Operation in excess of any one of these parameters may result in permanent damage. OPTICAL FIBER CHARACTERISTICS SPECIFICATION UNIT Mode Field Diameter 9.5±1 µm Cladding Diameter 125±2 µm 2 % 1.6 % 0.9±0.1 mm Maximum Cladding Noncircularity Maximum Core/Cladding Concentricity Outer Diameter Cut-off Wavelength Minimum Fiber Bending Radius Fiber Length Flammability 1100 to 1270 nm 30 mm 1000 MIN mm ULT1581 VW-1 35±2 mm SC-UPC Connector Fiber Length: 1000 mm MIN 8.99±0.5 mm PARAMETER NR3470MU-CC OUTLINE DIMENSIONS (Units in mm, ±0.2 mm unless otherwise specified) 1.0 0.7 3.1 1 12 13 14 15 16 17 3.3 0.9 0.2 3.1 0.3 11 7.5 8 9 10 Optical Fiber (SMF) Length: 1 m MIN With SC Connector 3.8 6 5 4 3 2 1.05 0.2 7 9.6 2-1.0 2-0.7 2.25 0.3 3.4 3.85 0.2±0.1 2.25 3.0 4.9±0.3 9.8 10.75 0.5 2.0 2.12 0.15 3.95±0.15 0.6 9.8 17.85 PIN CONNECTIONS PIN No. 1 2 3 4 5 6 7 SYMBOL GND Vpin NC VSS NC GND GND FUNCTION PIN No. Ground (0.0V) 8 PIN PD CATHODE 9 NC 10 POWER SUPPLY (-5.2V) 11 NC 12 GROUND (0.0V) 13 GROUND (0.0V) 14 SYMBOL OUT GND OUT GND GND NC NC FUNCTION PIN No. OUTPUT (INVERT) 15 GROUND (0.0V) 16 OUTPUT (NON-INVERT) 17 GROUND (0.0V) GROUND (0.0V) NC NC SYMBOL NC NC GND FUNCTION NC NC GROUND (0.0 V) Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 02/21/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.