PHOTOCOUPLER PS2801A-1,PS2801A-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER −NEPOC Series− DESCRIPTION The PS2801A-1 and PS2801A-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light. PIN CONNECTION FEATURES (Top View) • High isolation voltage (BV = 2 500 Vr.m.s.) • Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) PS2801A-1 4 3 • Ordering number of tape product: PS2801A-1-F3, F4, PS2801A-4-F3, F4 1. Anode 2. Cathode 3. Emitter 4. Collector • Pb-Free product • Safety standards • UL approved: File No. E72422 • DIN EN60747-5-2 (VDE0884 Part2) approved (Option) 1 2 PS2801A-4 16 15 14 13 12 11 10 9 APPLICATIONS • Programmable logic controllers • Measuring instruments • Power supply 1 2 3 4 5 6 7 8 • Hybrid IC Document No. PN10398EJ02V0DS (2nd edition) Date Published December 2004 CP(K) 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. The mark shows major revised points. Anode Cathode Emitter Collector PS2801A-1,PS2801A-4 PACKAGE DIMENSIONS (UNIT: mm) PS2801A-1 PS2801A-4 2.7±0.3 10.3±0.3 3 16 9 1 2 1 8 7.0±0.3 4.4 4.4 2.0+0.3 –0.2 0.15+0.10 –0.05 7.0±0.3 0.15+0.10 –0.05 2.0±0.1 0.1±0.1 4 0.1±0.1 0.5±0.3 1.27 0.4±0.1 0.12 M 0.40+0.10 –0.05 0.12 M 1.27 0.5±0.3 MARKING EXAMPLE PS2801A-4 PS2801A-1 1A Country Assembled 301 PS2801A-4 N 301 Assembly Lot No. 1 pin Mark *1 Last number of type No. : 1A N 3 01 3 01 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) *1 For external plating Pb-Free products, perform marking to indicate that these are lead-free products. 2 Assembly Lot *1 For the external plating Pb-Free product, L is indicated at the second digit of the rank. Data Sheet PN10398EJ02V0DS *1 PS2801A-1,PS2801A-4 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval PS2801A-1 PS2801A-1 Solder contains 50 pcs (Tape 50 pcs cut) Standard products PS2801A-1-F3 PS2801A-1-F3 lead Embossed Tape 3 500 pcs/reel (UL approved) PS2801A-1-F4 PS2801A-1-F4 PS2801A-4 PS2801A-4 Magazine Case 45 pcs PS2801A-4-F3 PS2801A-4-F3 Embossed Tape 2 500 pcs/reel PS2801A-4-F4 PS2801A-4-F4 PS2801A-1-V PS2801A-1-V 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS2801A-1-V-F3 PS2801A-1-V-F3 Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2801A-1-V-F4 PS2801A-1-V-F4 PS2801A-4-V PS2801A-4-V Magazine Case 45 pcs PS2801A-4-V-F3 PS2801A-4-V-F3 Embossed Tape 2 500 pcs/reel PS2801A-4-V-F4 PS2801A-4-V-F4 PS2801A-1 PS2801A-1-A PS2801A-1-F3 PS2801A-1-F3-A PS2801A-1-F4 PS2801A-1-F4-A PS2801A-4 PS2801A-4-A Magazine Case 45 pcs PS2801A-4-F3 PS2801A-4-F3-A Embossed Tape 2 500 pcs/reel PS2801A-4-F4 PS2801A-4-F4-A PS2801A-1-V PS2801A-1-V-A 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS2801A-1-V-F3 PS2801A-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2801A-1-V-F4 PS2801A-1-V-F4-A PS2801A-4-V PS2801A-4-V-A Magazine Case 45 pcs PS2801A-4-V-F3 PS2801A-4-V-F3-A Embossed Tape 2 500 pcs/reel PS2801A-4-V-F4 PS2801A-4-V-F4-A Application Part *1 Number PS2801A-1 PS2801A-4 PS2801A-1 Approved (Option) Pb-Free PS2801A-4 50 pcs (Tape 50 pcs cut) Standard products Embossed Tape 3 500 pcs/reel (UL approved) PS2801A-1 PS2801A-4 PS2801A-1 Approved (Option) PS2801A-4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10398EJ02V0DS 3 PS2801A-1,PS2801A-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings PS2801A-1 Diode Unit PS2801A-4 Forward Current (DC) IF 30 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current *1 ∆PD/°C 0.6 0.8 mW/°C PD 60 80 mW/ch IFP 0.5 A Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V IC 30 mA/ch ∆PC/°C 1.2 mW/°C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA −55 to +100 °C Storage Temperature Tstg −55 to +150 °C Transistor Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 4 Data Sheet PN10398EJ02V0DS PS2801A-1,PS2801A-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO VCE = 70 V, IF = 0 mA Coupled Current Transfer Ratio *1 (IC/IF) CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz *2 tr Rise Time Fall Time *2 VCC = 5 V, IC = 2 mA, RL = 100 Ω tf MIN. TYP. MAX. Unit 1.2 1.4 V 5 µA 10 50 0.13 10 pF 100 nA 400 % 0.3 V Ω 11 0.4 pF 5 µs 7 *1 CTR rank PS2801A-1 N : 50 to 400 (%) P : 150 to 300 (%) L : 100 to 300 (%) PS2801A-4 N : 50 to 400 (%) *2 Test circuit for switching time VCC Pulse Input PW = 100 µ s Duty Cycle = 1/10 IF VOUT 50 Ω RL = 100 Ω Data Sheet PN10398EJ02V0DS 5 PS2801A-1,PS2801A-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 80 PS2801A-4 60 0.8 mW/˚C PS2801A-1 40 0.6 mW/˚C 20 0 0 25 50 75 100 125 PS2801A-1 PS2801A-4 120 1.2 mW/˚C 80 40 0 0 25 50 75 100 125 Ambient Temperature TA ( ˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 TA = +100˚C +60˚C +25˚C Collector Current IC (mA) Forward Current IF (mA) 160 Ambient Temperature TA (˚C) 100 50 200 10 5 0˚C –25˚C –55˚C 1 0.5 IF = 10 mA 25 20 15 5 mA 10 2 mA 5 1 mA 0.1 Collector to Emitter Dark Current ICEO (nA) 0.05 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 0 1.5 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 10 000 IF = 10 mA 1 000 Collector Current IC (mA) 5 mA VCE = 24 V VCE = 70 V 100 10 1 0 25 50 75 100 2 mA 1 mA 1 0.1 0 0.2 0.4 0.6 0.8 Collector Saturation Voltage VCE(sat) (V) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. 6 2 Data Sheet PN10398EJ02V0DS 1.0 PS2801A-1,PS2801A-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 Normalized to 1.0 0.4 at TA = 25˚C, IF = 5 mA, VCE = 5 V 0.2 CTR : 90% CTR : 390% 0 –75 –50 –25 0 100 Switching Time t (µ s) 400 25 50 75 VCE = 5 V, n=3 300 Sample A B C 200 100 0 0.01 100 0.1 1 10 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 IC = 2 mA, VCC = 5 V, CTR = 236% IF = 5 mA, VCC = 5 V, CTR = 236% tf tr Switching Time t (µs) Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 10 td ts 1 tf 100 ts 10 tr 0.1 10 100 1 000 td 1 1 10 000 10 100 Load Resistance RL (kΩ) Load Resistance RL (Ω) LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 5 1.2 0 1.0 –5 100 Ω –10 300 Ω –15 RL = 1 kΩ –20 1 10 0.8 TA = 25˚C 0.6 TA = 60˚C 0.4 0.2 IF = 5 mA, VCE = 5 V –25 0.1 CTR (Relative Value) Normalized Gain Gv IF = 5 mA (TYP.) 100 1 000 0 10 102 103 104 105 Time (Hr) Frequency f (kHz) Remark The graphs indicate nominal characteristics. Data Sheet PN10398EJ02V0DS 7 PS2801A-1,PS2801A-4 TAPING SPECIFICATIONS (UNIT: mm) φ 1.5+0.1 –0 7.5±0.1 4.0±0.1 16.0±0.3 2.0±0.1 7.55±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.55±0.1 2.3±0.1 2.85±0.1 4.0±0.1 Tape Direction 1A 301 1A 301 1A 301 1A 301 1A 301 1A 301 1A 301 1A 301 1A 301 PS2801A-1-F4 1A 301 PS2801A-1-F3 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel 8 Data Sheet PN10398EJ02V0DS 15.9 to 19.4 Outer edge of flange PS2801A-1,PS2801A-4 2.8 MAX. 16.0±0.3 7.5±0.1 φ 1.5+0.1 –0 10.7±0.1 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 2.3±0.1 8.3±0.1 1.55±0.1 12.0±0.1 Tape Direction PS2801A-4-F3 PS2801A-4-F4 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 2 500 pcs/reel Data Sheet PN10398EJ02V0DS 15.9 to 19.4 Outer edge of flange 9 PS2801A-1,PS2801A-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C 10 Data Sheet PN10398EJ02V0DS PS2801A-1,PS2801A-4 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10398EJ02V0DS 11 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.