CE KBPC1005 THRU KBPC110 CHENYI ELECTRONICS SINGLE PHASE GLASS BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:3.0A FEATURES Ideal for printed circuit board Surge overload rating: 50A peak High case dielectric strength MECHANICAL DATA . Terminal: Plated leads solderable per MIL-STD 202E, method 208C . Case: UL-94 Class V-0 recognized Flame Retardant Epoxy . Polarity: Polarity symbol marked on body . Mounting : Hole thru for #6 screw MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL KBPC1005 KBPC101 KBPC102 KBPC104 KBPC106 KBPC108 KBPC110 Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 Vdc 50 100 200 400 600 800 1000 Maximum DC blocking Voltage units v v v Maximum Average Forward Rectified current at Ta=50 If(av) 3.0 A Ifsm 50 A Vf 1.1 V 10.0 A mA Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 1.5A DC Maximum DC Reverse Voltage Ta=25 at rated DC blocking voltage Ta=100 Ir 1.0 Operating Temperature Range Tj -55 to +125 Tstg -55 to +150 Storage and operation Junction Temperature Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2 CE KBPC1005 THRU KBPC110 CHENYI ELECTRONICS SINGLE PHASE GLASS BRIDGE RECTIFIER Voltage: 50 TO 1000V CURRENT:3.0A RATINGS AND CHARACTERISTIC CURVES KBPC1005 THRU KBPC110 FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2