OAA160 DUAL POLE OptoMOS® Relay Load Voltage Load Current Max RON OAA160 250 50 20 Description OAA160 is a 250V, 50mA, 20Ω 2-Form-A relay. This high performance product provides the fastest (0.125ms) switching available for two independent Form-A relays in a single package. Units V mA Ω Features • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified to: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 • BS EN 41003:1993 Certificate #: 7344 Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part # OAA160 OAA160P OAA160PTR OAA160S OAA160STR Description 6 Pin DIP (50/Tube) 6 Pin Flatpack (50/Tube) 6 Pin Flatpack (1000/Reel) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration OAA160 Pinout AC/DC Configuration + Control - Pole #1 – Control - Pole #1 + Control - Pole #2 – Control - Pole #2 1 8 2 7 3 6 4 5 Normally Open - Pole #1 Normally Open - Pole #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10%+ 10%+ TON DS-OAA160-R3 www.clare.com TOFF 1 OAA160 Absolute Maximum Ratings (@ 25˚ C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V Total Power Dissipation - - 8002 mW 3750 - - VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +260 +220 °C °C Isolation Voltage Input to Output Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units Load Voltage (Peak) - VL - - 250 V Load Current* (Continuous) AC/DC Configuration - IL - - 50 mA 10ms ILPK - - 100 mA Output Characteristics @ 25°C Peak Load Current On-Resistance AC/DC Configuration IL=50mA RON - 50 100 Ω Off-State Leakage Current VL=250V ILEAK - - 0.025 µA Switching Speeds Turn-On Turn-Off IF=10mA, VL=10V IF=10mA, VL=10V TON TOFF - - 0.125 0.125 ms ms Output Capacitance 50V; f=1MHz COUT - 5 - pF IL=50mA IF 10 - 50 mA Input Characteristics @ 25°C Input Control Current Input Dropout Current - IF 0.4 0.7 - mA IF=10mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current Input Voltage Drop VR=5V IR - - 10 µA Input to Output Capacitance - CI/O - 3 - pF Input to Output Isolation - VI/O 3750 - - VRMS *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 3 OAA160 PERFORMANCE DATA* Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 42.5 1.25 43.5 20 20 15 10 5 46.5 2.975 3.425 367.5 10 5 0 0.022 0.027 0.032 10 5 2.075 2.525 2.975 3.425 1.50 395 1.25 Turn-On (ms) 390 385 380 375 40 60 Temperature (°C) 80 100 0.09 0.11 0.13 0.15 OAA160 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) 0.012 30mA 20mA 10mA 0.010 0.008 0.006 0.004 0.002 0 -20 0 20 40 60 80 100 120 -40 0 20 40 60 80 100 Temperature (°C) OAA160 Typical Turn-On vs. Temperature (Load Current = 50mADC) OAA160 Typical Turn-Off vs. Temperature (Load Current = 50mADC) 1.00 0.75 0.50 10mA -40 -20 Temperature (°C) 0 365 20 0.07 Turn-On (ms) 0.25 370 0 0.05 3.875 Turn-Off (ms) 400 -20 10 0.014 Turn-Off (ms) -40 15 0 -40 OAA160 Typical Blocking Voltage vs. Temperature 402.5 5 100 90 80 70 60 50 40 30 20 10 0 0.037 395.5 20 OAA160 Typical Load Current vs. Temperature Load Current (mA) 15 388.5 OAA160 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) LED Current (mA) 20 381.5 25 1.625 25 0.017 374.5 Blocking Voltage (V) 15 3.875 OAA160 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) 0.012 10 0 47.5 0 2.525 15 30 LED Current (mA) Device Count (N) 45.5 Device Count (N) 25 Device Count (N) Device Count (N) 25 0 Blocking Voltage (VRMS) 44.5 OAA160 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC ) OAA160 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC) 2.075 20 On-Resistance (Ω) LED Forward Voltage Drop (V) 1.625 25 5 Leakage (µA) Device Count (N) 30 OAA160 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 OAA160 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) OAA160 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 10mADC -20 0 20 40 60 20mA 80 100 Temperature (°C) 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 10mA -40 -20 0 20 40 60 80 100 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 3 www.clare.com 3 OAA160 PERFORMANCE DATA* OAA160 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC) 1.8 0.035 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 Turn-Off (ms) 0.14 0.12 0.10 0.08 0.06 0.04 0 20 40 60 80 100 0.025 0.020 0.015 0 -20 0.030 0.02 0.8 120 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 Temperature (°C) LED Forward Current (mA) LED Forward Current (mA) OAA160 Typical On-Resistance vs. Temperature (Load Current = 50mADC; IF = 10mADC) OAA160 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC) OAA160 Typical IF for Switch Dropout vs. Temperature LED Current (mA) 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 LED Current (mA) 70 On-Resistance (Ω) 0.040 0.16 -40 -40 Temperature (°C) -20 0 20 40 60 80 100 50 40 30 20 10 0 -10 -20 -30 -40 -50 50 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) OAA160 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 10mADC OAA160 Energy Rating Curve 0.45 0.40 Load Current (A) Load Current (mA) OAA160 Typical Turn-Off vs. LED Forward Current (Load Current = 50mADC) 0.18 1.6 Turn-On (ms) LED Forward Voltage Drop (V) OAA160 Typical LED Forward Voltage Drop vs. Temperature 0.35 0.30 0.25 0.20 0.15 0.10 0.05 -3 -2 -1 0 1 Load Voltage (V) 2 3 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 3 OAA160 Mechanical Dimensions 9.652 ± .381 (.380 ± .015) 8 Pin DIP Through Hole (Standard) 2.540 ± .127 8-.800 DIA. (.100 ± .005) (8-.031 DIA.) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 7.239 TYP. (.285) PC Board Pattern (Top View) 3.302 (.130) 9.144 ± .508 (.360 ± .020) 6.350 ± .127 (.250 ± .005) 9.144 TYP. (.360) .457 ± .076 (.018 ± .003) 7.620 ± .127 (.300 ± .005) 8.077 ± .127 (.318 ± .005 ) 9.652 ± .381 (.380 ± .015) 8 Pin DIP Surface Mount (“S” Suffix) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .254 TYP. (.010) (.100 ± .005) 9.525 ± .254 (.375 ± .010) 6.350 ± .127 (.250 ± .005) .635 TYP. (.025) PC Board Pattern (Top View) 2.540 ± .127 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) .457 ± .076 (.018 ± .003) 1.498 ± .127 (.059 ± .005) 8.077 ± .127 (.318 ± .005) 9.652 ± .381 (.380 ± .015) 2.540 ± .127 (.100 ± .005) 8 Pin Flatpack (“P” Suffix) 2.159 TYP. (.085) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 7.620 ± .254 (.300 ± .010) 2.286 MAX. .635 ± .127 (.090) (.025) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) 6.350 ± .127 (.250 ± .005) 9.398 ± .127 (.370 ± .005) .203 (.008) 8.763 ± .127 (.345 ± .005) 1.193 (.047) .457 ± .076 (.018 ± .003) 8.077 ± .127 (.318 ± .005) .787 (.031) Dimensions mm (inches) Rev. 3 www.clare.com 5 OAA160 Mechanical Dimensions Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) Top Cover Tape Thickness .102 MAX. (.004) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.989 ± .102 (.472 ± .004) 10.300 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± 0.102 (.265) (.069 ± .004) .406 MAX. (.016) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 7.493 ± .102 (.295 ± .004) 1 8 12.090 (.476) 10.287 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier 16.002 ± .305 (.630 ± .012) .050R TYP. 11.988 ± .102 (.472 ± .004) Embossment 10.287 ± .102 (.405 ± .004) 1.549 ± .102 (.061 ± .004) User Direction of Feed Dimensions mm (inches) 6 www.clare.com Rev. 3 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-OAA160-R3 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/14/01