RL201 DC COMPONENTS CO., LTD. THRU RECTIFIER SPECIALISTS R RL207 TECHNICAL SPECIFICATIONS OF SILICON RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * * * * Low cost Low leakage Low forward voltage drop High current capability DO-15 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL RL201 RL202 RL203 RL204 RL205 RL206 RL207 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 75 oC Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A = 100 oC Maximum Full Load Reverse Current Average, Full Cycle o .375*(9.5mm) lead length at T L = 75 C Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range IO Volts 2.0 Amps I FSM 70 Amps VF 1.1 5.0 500 Volts IR uAmps 30 CJ 20 RθJA T J , T STG 40 -65 to + 175 uAmps pF 0 C/ W 0 C NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts 110 NEXT NEXT NEXT EXIT BACK BACK EXI BACK EXIT RATING AND CHARACTERISTIC CURVES (RL201 THRU RL207) DC COMPONENTS CO., LTD. R 111 NEXT EXIT BACK NEXT EXI BACK EXIT NEXT BACK