PR1000R THRU PR1800R PHOTOFLASH RECTIFIER Reverse Voltage - 1000 to 1800 Volts Forward Current - 0.5 Ampere Features Fast switching Low leakage Low forward voltage drop High current capability High surge capability High reliability Mechanical Data DIM ENSIONS Case: Molded plastic, R-1 Epoxy: UL94V-0 rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting Position: Any Weight: 0.007 ounce, 0.20 gram inches DIM mm Min. Max. Min. A 0.114 0.138 2.9 3.5 B 0.095 0.099 2.42 2.51 C 0.020 0.024 0.5 0.6 D 1.000 - 25.40 - Note Max. Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols PR1000R PR1200R PR1400R PR1600R PR1800R Units Volts Maximum repetitive peak reverse voltage VRRM 1000 1200 1400 1600 1800 Maximum RMS voltage VRMS 700 840 980 1120 1260 Volts Maximum DC blocking voltage VDC 1000 1200 1400 1600 1800 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55 I(AV) 500 mAmps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum instantaneous forward voltage at 0.5A DC VF 1.5 Volts Maximum DC reverse current at rated DC blocking voltage IR 5.0 A Maximum reverse recovery time (Note 1) Trr 300.0 Typical junction capacitance (Note 2) Cj 10 TJ, TSTG -65 to +175 TA=25 Operating and storage temperature range Notes: (1) Test conditions: IF=0.5A, IR=1.0A, IRR=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts 1 nS F RATINGS AND CHARACTERISTIC CURVES 2