MULTIANODE PHOTOMULTIPLIER TUBE R5900U-00-M4 FEATURES 2 × 2 multianode Newly developed "metal channel dynode" High speed response Low cross - talk GENERAL Parameter Description / Value Spectral Response 300 to 650 nm 420 nm Wavelength of Maximum Response Photocathode Material Bialkali – Minimum Effective Area 18 × 18 mm2 Window Material Structure Dynode Unit Borosilicate glass – Metal channel dynode – Number of Stages 10 – Approx. 26 g E678-32B (option) – Value Unit 900 Vdc 0.1 mA Weight Suitable Socket MAXIMUM RATINGS (Absolute Maximum Values) Parameter Supply Voltage Between Anode and Cathode Average Anode Current CHARACTERISTICS (at 25 °C) Parameter Cathode Sensitivity Anode Sensitivity Min. Typ. Max. Unit Luminous (2856 K) 50 70 – µA/lm Blue (CS - 5 - 58 filter) 6 8 – µA/lm-b Luminous (2856 K) Gain Anode Dark Current per Channel (after 30min. storage in darkness) 25 140 – A/lm 5 × 105 2 × 106 – – – 0.5 – nA ns Anode Pulse Rise Time – 1.2 – Transit Time Spread (FWHM) – 0.32 – ns Pulse Linearity per Channel ( ± 2 % deviation) – 5(30a) – mA Cross - talk (9 × 9 mm2 Aperture) – 2 4 % Uniformity Between Each Anode – 1:1.5 1:3 – Time Response NOTE : Anode characteristics are measured with the voltage distribution ration A shown below. a : Measured with the special voltage distribution ratio B (Tapered Bleeder) shown below. VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 P Ratio A 1.5 1.5 1.5 1 1 1 1 1 1 1 1 Ratio B (Tapered Bleeder) 1.5 1.5 1.5 1 1 1 1 1 1 2 3.6 Supply Voltage: 800 Vdc, K: Cathode, Dy: Dynode, P: Anode Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©1999 Hamamatsu Photonics K.K MULTIANODE PHOTOMULTIPLIER TUBE R5900U-00-M4 Figure 1: Typical Spectral Response 100 Figure 2: Typical Gain and Anode Dark Current TPMHB0266EA 107 TPMHB0312EA 10-5 10 QUANTUM EFFICIENCY 106 10-6 105 10-7 104 10-8 1 ANODE DARK CURRENT PER CHANNEL 103 10-9 102 10-10 101 10-11 0.1 0.01 100 200 300 400 500 600 700 800 100 400 900 800 SUPPLY VOLTAGE (V) WAVELENGTH (nm) Figure 3: Typical Time Response 600 Figure 4: Typical T.T.S. Characteristic TPMHB0313EA TPMHB0314EA 20 (mV/div.) RELATIVE COUNTS 104 SUPPLY VOLTAGE=-800 (V) RISE TIME=1176 (ps) FALL TIME =1453 (ps) WIDTH=2077 (ps) RL=50 (Ω) 2 (ns/div.) SUPPLY VOLTAGE= -800 V FWHM= 310 psec FWTM= 631 psec 103 102 101 100 TIME (0.5ns/div) 10-12 1000 ANODE DARK CURRENT (A) CATHODE RADIANT SENSITIVITY GAIN CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) GAIN Figure 5: Pulse Linearity per Channel TPMHB0315EA 10 DEVIATION (%) PULSE WIDTH=50 (ns) REPETITION=1 (kHz) SUPPLY VOLTAGE= -800 (V) 0 Bleeder Ratio 1.5 : 1.5 : 1.5 : 1 : 1 : .... : 1 : 2 : 3.6 -10 -20 10-1 100 101 102 OUTPUT CURRENT (mA) Figure 6: Anode Uniformity (Example) Figure 7: Anode Cross Talk (Example) 82 95 0.1 0.9 97 100 1.3 100 Supply Voltage : 800 V Supply Voltage : 800 V Light Source Light Source : Lamp(uniform DC light) : Lamp(uniform DC light) Spot Illumination : 9 × 9 mm2 Full Illumination K IC (Dy10) IC Dy1 Dy2 Dy3 Dy4 IC (Dy10) CUT (K) Figure 8: Dimensional Outline and Basing Diagram (Unit: mm) 30.0 ± 0.5 23.5 MAX. 12.0 ± 0.5 2.54 PITCH IC P1 IC IC IC P4 IC 0.20 18MIN. 4.4 ± 0.7 1 MAX. 4 MAX. 0.20 PHOTOCATHODE Side View IC P2 IC IC IC P3 IC 29- 0.45 INSULATION COVER Top View 1 2 3 4 5 6 7 8 9 32 10 11 31 30 12 GUIDE 29 13 CORNER 28 14 15 27 16 26 25 24 23 22 21 20 19 18 17 Bottom View CUT (K) Dy10 Dy9 Dy8 Dy7 Dy6 Dy5 IC (Dy10) CUT(K) 25.7 ± 0.5 : Photocathode K Dy : Dynode : Anode P CUT : Short Pin IC : Internal Connection (Don't Use) Basing Diagram TPMHB297EF MULTIANODE PHOTOMULTIPLIER TUBE R5900U-00-M4 [ACCESSORIES] OPTION Socket E678-32B 22.86 4.45 2.92 12.7 20.32 22.86 2.54 20.32 0.51 1.57 12.7 MATERIAL: Glass Epoxy TACCA0094ED D Type Socket Assembly E7083 30.0 ± 0.5 30.0 ± 0.5 PIN No.1 27 P4 15 P3 11 SIGNAL OUTPUTS P2 :COAXIAL CABLE (GRAY) 31 P1 P4 P3 P2 P1 POM HOUSING 15.0 ± 0.5 DY10 DY9 DY8 R14 R11 C3 R13 R10 C2 R12 R9 C1 24 23 22 450 R8 DY7 21 DY6 20 DY5 19 DY4 7 DY3 6 DY2 5 DY1 4 R1 to R3 R4 to R11 R12 to R14 R15 C1 to C3 R7 R6 : 330 kΩ : 220 kΩ : 51 Ω : 1 MΩ : 0.01 µF R5 R4 P2 P3 -HV RG-174/U R3 R2 ORIENTATION BY MARKING P1 POTTING COMPOUND P4 P1toP4:SIGNAL OUTPUTS COAXIAL CABLE(GRAY) K R15 R1 -H.V 1 : RG-174U (RED) *For a stable operation, all of anodes should be connected to ground potential through load resistors such as 100 k ohm or so, even if they are not used. WARNING ~ High Voltage ~ TACCA0162EC The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments. ∗ PATENT: USA Pat. No. 5410211 PATENT PENDING: JAPAN11, USA1, EUROPE2 HOMEPAGE URL http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 TPMH1126E09 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 DEC. 1999 SI Printed in Japan(1000)