DATA SHEET APD Series: Silicon PIN Diode Chips Features Established Skyworks PIN diode process For switch and attenuator applications ● Low capacitance designs to 0.05 pF ● Voltage ratings to 100 V ● Chip size smaller than 15 mils square ● ● Description Absolute Maximum Ratings Skyworks APD Series of silicon PIN diode chips are designed for use as switch and attenuator devices in high performance hybrid microwave integrated circuits. These PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices utilize Skyworks well established silicon technology resulting in high resistivity and tightly controlled I region width PIN diodes. APD0505-00 through APD0810-000 are primarily designed for fast speed through moderate speed switch applications. They have low resistance and capacitance at zero bias and reverse bias. The thick I region APD2220-000 is primarily designed for low distortion attenuator applications. Characteristic Value Power dissipation Pdiss = 175-Tamb W θ Operating temperature -65 °C to +175 °C Storage temperature -65 °C to +200 °C Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Electrical Specifications at 25 °C Capacitance VR = 50 V, 1 MHz (pF) Capacitance VR = 0 V, 1 MHz (pF) RS I = 10 mA, 500 MHz Ω) (Ω TL I = 10 mA (ns) Voltage Rating IR = 10 µA (V) I Region (µm) Thermal Resistance (°C/W) Contact Diameter (Mils) Max. Typ. Max. Typ. Min. Nom. Max. Nom. APD0505-000 0.05 0.10 2.0 20 50 5 100 1.5 150-806 APD0510-000 0.10 0.20 1.5 40 50 5 80 2.5 150-801 APD0520-000 0.20 0.25 1.0 50 50 5 80 3.5 150-801 APD0805-000 0.05 0.10 2.0 100 100 8 80 2.0 150-801 APD0810-000 0.10 0.15 1.5 160 100 8 60 3.0 150-801 0.20 0.20 4.0 700 100 50 80 7.5 149-815 Part Number Outline Drawing Switching Applications Attenuator Applications APD2220-000 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200075 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 17, 2005 1 DATA SHEET • APD SERIES Typical Performance Data 1000 1000 APD2220-000 100 Resistance (Ω) Resistance (Ω) 100 APD0805-000 10 APD0505-000 1 APD0810-000 10 1 0.1 0.01 0.1 1 10 0.1 0.01 100 0.1 1 10 100 Forward Current (mA) Forward Current (mA) Resistance vs. Forward Current @ 1 GHz Resistance vs. Forward Current @ 1 GHz SPICE Model Parameters Symbol APD0505-000 APD0510-000 APD0805-000 APD0810-000 APD2220-000 Unit Saturation current Description IS 6.40E-14 5.50E-17 1.20E-11 1.50E-12 2.00E-09 A Series resistance RS 0.25 0.50 1.00 0.30 0.20 Ω Emission coefficient N 1.40 1.02 1.70 1.48 1.90 Reverse breakdown BV 50.00 50.00 100.00 100.00 200.00 V Current at BV IBV 10E-06 10E-06 10E-06 10E-06 10E-06 A Zero bias capacitance CJ0 0.12E-12 0.18E-12 0.13E-12 0.16E-12 0.2E-12 F Junction potential VJ 1.00 1.00 1.00 1.00 1.00 V Grading coefficient M 0.50 0.50 0.50 0.50 0.50 Transit time TT 20E-9 40E-9 50E-9 160E-9 300E-9 s Outline Drawings 149-815 150 Series Anode Metalized Gold Dot Anode Metalized Gold Dot 0.002 (0.051 mm) Min. Dia. 0.014 ± 0.001 (0.350 ± 0.025 mm) 0.010 (0.251 mm) Min. 0.014 (0.356 mm) Max. Sq. 150-801: 0.002 (0.051 mm) Min. 150-806: 0.0011 (0.028 mm) Min. 0.014 ± 0.001 (0.350 ± 0.025 mm) 0.004 (0.127 mm) Min. 0.006 (0.152 mm) Max. 0.004 (0.127 mm) Min. 0.006 (0.152 mm) Max. Cathode Metalized Back Contact Gold Silicon Cathode Metalized Back Contact Gold Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 February 17, 2005 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200075 Rev. C DATA SHEET • APD SERIES Copyright © 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions. THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. The following are trademarks of Skyworks Solutions, Inc.: Skyworks®, the Skyworks logo, and Breakthrough Simplicity®. Product names or services listed in this publication are for identification purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at www.skyworksinc.com, is incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200075 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 17, 2005 3