GaAs IC SPDT Low Loss Switch Reflective DC–2.5 GHz AS002R2-12 Features ■ Low Insertion Loss (0.5 dB @ 0.9 GHz) SOIC-8 PIN 8 0.050 (1.27 mm) BSC ■ High Isolation (35 dB @ 0.9 GHz) ■ Low Power T/R Switch 0.244 (6.20 mm) 0.228 (5.80 mm) PIN 1 INDICATOR ■ Low Cost SOIC-8 Plastic Package 0.020 (0.51 mm) MAX. PIN 1 Description The AS002R2-12 is a low loss IC FET SPDT reflective general purpose switch in a plastic SOIC-8 package for commercial low cost, low power applications. The switch operates with -5, 0 V or 0, +5 V when “floated” as shown on the following page. 0.068 (1.73 mm) MAX. 0.197 (5.00 mm) 0.189 (4.80 mm) 0.010 (0.25 mm) 0.004 (0.10 mm) 0.016 MAX. (0.41 mm) x 45˚ CHAMFER 0.049 (1.24 mm) 0.016 (0.41 mm) 0.158 (4.00 mm) 0.150 (3.80 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 8˚ MAX. Electrical Specifications at 25°C (0, -5 V) Parameter1 Insertion Frequency2 Loss3 DC–0.5 DC–1.0 DC–2.0 DC–2.5 GHz GHz GHz GHz Isolation DC–0.5 DC–1.0 DC–2.0 DC–2.5 GHz GHz GHz GHz VSWR4 DC–0.5 GHz DC–1.0 GHz DC–2.5 GHz Min. 40 30 22 18 Typ. Max. Unit 0.4 0.5 0.7 0.8 0.5 0.6 0.8 0.9 dB dB dB dB 42 32 24 20 dB dB dB dB 1.2:1 1.3:1 1.5:1 1.3:1 1.5:1 1.7:1 Typ. Max. Operating Characteristics at 25°C (0, -5 V) Parameter Switching Characteristics5 Condition Frequency Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru Input Power for 1 dB Compression Min. Unit 3 6 15 ns ns mV 0.50–2.0 GHz 0.05 GHz +24 +16 dBm dBm 0.50–2.0 GHz +46 dBm Intermodulation Intercept Point (IP3) For Two-tone Input Power +13 dBm Control Voltages VLow = 0 to -0.2 V @ 20 µA Max. VHigh = -5 V @ 50 µA to -8 V @ 200 µA Max. 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. DC = 300 kHz. 3. Insertion loss changes by 0.003 dB/°C. 4. Insertion loss state. 5. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth. Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 3/99A 1 GaAs IC SPDT Low Loss Switch Reflective DC–2.5 GHz AS002R2-12 Typical Performance Data (0, -5 V) 1.2 60 1.0 50 40 0.8 dB dB +85˚C 0.6 30 -40˚C 20 0.4 0.2 10 2 1 1 3 2 3 Frequency (GHz) Frequency (GHz) Isolation vs. Frequency Insertion Loss vs. Frequency 1.5 Absolute Maximum Ratings Characteristic 1.4 RF Input Power 1.3 Control Voltage 1.2 1.1 Value 2 W > 500 MHz 0/-8 V 0.5 W @ 50 MHz 0/-8 V +0.2 V, -8 V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C ΘJC 25°C/W Note: Exceeding these parameters may cause irreversible damage. 1.0 1 2 3 Pin Out Frequency (GHz) VSWR vs. Frequency VS 10k 8 J1 1 Truth Table CBP CBL GND J1–J2 J1–J3 -5 Isolation Insertion Loss -5 0 Insertion Loss Isolation 6 V2 0 7 V1 3 GND 2 Negative Operation CBP J3 CBL CBL 5 4 V2 V1 Positive Operation V1 V2 J1–J2 J1–J3 VHigh 0 Isolation Insertion Loss 0 VHigh Insertion Loss Isolation External components shown are for positive voltage operation only. CBL = 100 pF, CBP = 1000 pF for operation >500 MHz. VHigh = +5 to +8 V (VS = VHigh ± 0.2 V). 2 Skyworks Solutions, Inc. [781] 376-3000 • Fax [781] 376-3100 • Email [email protected] • www.skyworksinc.com Specifications subject to change without notice. 3/99A J2