DATA SHEET for LED Part No. LUW/G/B30243 Emitting Color Lens’ Color Super White/Green/Blue Chip Material Water Clear InGaN Package Dimensions : 3.0 4.3 1.0 1.5 max 3.85 0.5 typ 1 25.0min 2 1.ANODE 2.CATHODE 1.0min 2.54 typ Note : 1. All dimensions are in millimeters(mm) 2. Tolerance is ±0.25mm unless otherwise noted - 1 - Absolute Maximum Rating of Each Segment (Ta = 25℃) Parameter Symbol Maximum Rating Unit Power Dissipation PM 150 mW Pulse Forward Current (Duty 1/10 @ 1kHz) IFP 100 mA Continuous Forward Current IF 40 mA Reverse Voltage VR 6 V Operation Temperature Topr －25℃∼85℃ ℃ Storage Temperature Tstg －40℃∼100℃ ℃ Soldering Temperature : 2.0mm from Body for 3 seconds at 260℃ Electron‐Optical Characteristics of Each Segment (Ta = 25℃) Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity I V 1,500 mcd IF=20 mA Forward Voltage VF 3.5 4.0 V IF=20 mA Reverse Current IR 50 μA VR=5V Dominant Wavelength λd 473 nm IF=20 mA Peak Emission Wavelength λp 470 nm IF=20 mA Spectral Line Half Width Δλ 20 nm IF=20 mA 2θ1/2 20 deg IF=20 mA Viewing Angle Note : 1) The luminous intensity data and λP is survey values with the machine JF‐Ⅱ, JS‐2000. 2) 2θ1/2 is the chip angle at which the luminous intensity half the axial luminous intensity. 3) Pay attention to electrostatic (ESD) - 2 - Typical Characteristic Curves : Spectral Radiance Normalized Response 100% 80% 60% 40% 20% 0% 380 420 460 500 540 580 620 660 700 740 780 Wave Length(nm) Relative Luminous Intensity Vs Forward Current Relative Intensity 125% 100% 75% 50% 25% 0% 0 10 20 30 Forward Current IF(mA) Forward Current Vs. Forward Voltage Forward Current(mA) 40 30 20 10 0 1 2 3 4 5 Forward Voltage(V) - 3 -