Opto Coupler 5 OC100 10kV OptoDiode 3 1 LED LED 4 2 6 ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS LED • Forward DC Current 100 mA • Surge Current 2.5 A • Reverse Voltage 5V • Power Dissipation 200 mW at 25°C LED • Forward Voltage (If = 100 mA) 1.5 V • Reverse Leakage Current 10nA VR = 5 V Photodiode • Reverse Voltage 10,000 V • Power Dissipation 1W _______________________________________________ • Storage Temperature -40°C to +125°C • Operating Temperature -40°C to +100°C • Isolation Test Voltage 25 kV (Pins 1, 2, 3, & 4 tied to pins 5 & 6) Photodiode • Foward Voltage (If = 0.6 A) 12.0 V MAX • Reverse Leakage Current Typical VR = 10 kV, ILED = 0 mA 250 nA VR = 10 kV, ILED = 100 mA 100 µA Coupled • DC Current Transfer Ratio • TON • TOFF 0.1% 2 µs 2 µs All ratings at 25°C unless otherwise noted. VOLTAGE MULTIPLIERS INC. 8711 W. Roosevelt Ave. Visalia, CA 93291 TEL 559-651-1402 FAX 559-651-0740 www.voltagemultipliers.com OC100 .97 (24.64) 10 kV Power Supply .225 (5.72) 100 M 3 5 1 4 6 2 VOUT 1.00 (25.4) .450(11.43) 3 5 1 4 6 2 .322(8.18) Feedback & Control .161 (4.09) .485 (12.32) 1.00 (25.4) .165 (4.19) LABELING .094 (2.39) Typical HV Linear Regulator Circuit Select resistor value to optimize circuit for VOUT and IOUT range. 1.050 (26.67) PHOTODIODE REVERSE CURRENT VS. TEMPERATURE AT Vrwm 1000.0 OPTOCOUPLER GAIN VS. TEMPERATURE 0.16 0.12 100.0 Percent Gain Reverse Current (uA) 0.14 0.10 0.08 10.0 0.06 0.04 1.0 25 50 75 100 Temperature (°C) Temperature (C) 125 150 0.02 -25 0 25 50 75 100 Temperature (°C) 125 150