MICROSEMI 1N6327US

1N6309US thru 1N6355US
VOIDLESS-HERMETICALLY-SEALED
Surface Mount 500 mW Glass Zener Diodes
SCOTTSDALE DIVISION
APPEARANCE
This Zener Voltage Regulator series is military qualified to MIL-PRF19500/533 and is ideal for high-reliability applications where a failure
cannot be tolerated. These industry-recognized 0.5 Watt Zener Voltage
Regulators are hermetically sealed with voidless-glass construction using
an internal metallurgical bond. It includes Zener selections from 2.4 to 200
volts in standard 5% tolerances as well as tighter tolerances identified by
different suffix letters on the part number. They are also available in axialleaded packages (see separate data sheet for 1N6309 thru 1N6355).
Microsemi also offers numerous other Zener products to meet higher and
lower power ratings in both thru-hole and surface mount packages.
“B” PACKAGE
(or “D-5D”)
WWW . Microsemi .C OM
DESCRIPTION
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
•
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Popular JEDEC registered series
Voidless hermetically sealed glass package
Triple-layer passivation
Internal “Category I” Metallurgical bonds for 1N6320
thru 1N6355 and “Category III” for 1N6309 thru
1N6319
JAN, JANTX, JANTXV, and JANS available per MILPRF-19500/533 for 1N6309US to 1N6336US
JANS types available per MIL-S-19500/533 for
1N6320US to 1N6336US.
Axial-leaded equivalents also available (see separate
data sheet for 1N6309 thru 1N6355)
•
•
•
•
•
•
•
MAXIMUM RATINGS
•
•
•
•
•
•
o
MECHANICAL AND PACKAGING
o
Operating Temperature: -65 C to +175 C
Storage Temperature: -65oC to +175oC
Power Dissipation: 0.5 Watts @ TEC = 150oC
Thermal Resistance: 50oC/W junction to End Cap
Thermal Impedance: 15oC/W at 10 ms
Forward Voltage: 1.4 V at 1.0 A
•
•
•
•
•
•
CASE: Hermetically sealed voidless hard glass with
Tungsten slugs
TERMINATIONS: End caps are Tin/Lead (Sn/Pb)
over Silver
MARKING: None
POLARITY: Cathode indicated by band
Tape & Reel option: Standard per EIA-481-B
Weight: 84 mg
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
1N6309 thru 1N6355
Copyright  2005
2-02-2005 REV A
Regulates voltage over a broad operating current
and temperature range
Extensive selection from 2.4 to 200 V
Standard voltage tolerances are plus/minus 5% with
no suffix
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively
Extremely robust construction
Nonsensitive to ESD per MIL-STD-750 Method 1020
Inherently radiation hard as described in Microsemi
MicroNote 050
1N6309US thru 1N6355US
VOIDLESS-HERMETICALLY-SEALED
Surface Mount 500 mW Glass Zener Diodes
SCOTTSDALE DIVISION
Note 1
VZ2
NOM.
+/-5%
@ IZ2
VZ1
MIN.
@ IZ1
250 uA
1N6309US
1N6310 US
1N6311 US
1N6312 US
VOLTS
2.4
2.7
3.0
3.3
VOLTS
1.1
1.2
1.3
1.5
TYPE
Voltage
Dynamic
Dynamic
Max.
Max.
Test
Reg.
Impedance Impedance Current
Surge Reverse
Current
ZZ
ZZK
IZM
VZ(reg) Current Voltage
IZ2
@
@
VR
IZSM
(∆VZ)
250 µA
IZ2
Note 2
Max.
Reverse
Current
IR1 @ VR
o
25 C
Max.
Reverse
Current
IR2 @ VR
o
150 C
Max.
Maximum
Temp.
Noise
Density Coeff. of
ND
Zener
@ 250 µA Voltage
1 to 3 kHz αVZ
mA
20
20
20
20
OHMS
30
30
29
24
OHMS
1200
1300
1400
1400
mA
177
157
141
128
VOLTS
1.5
1.5
1.5
1.6
AMPS
2.5
2.2
2.0
1.8
VOLTS
1.0
1.0
1.0
1.0
µA
100
60
30
5.0
µA
200
150
100
20
µV /√Hz
1.0
1.0
1.0
1.0
3.6
1.8
20
22
1400
109
1.6
1.65
1.0
3.0
12
1.0
1N6314 US
3.9
2.0
20
20
1700
118
1.6
1.5
1.0
2.0
12
1.0
1N6315 US
4.3
2.4
20
18
1400
99
0.9
1.4
1.0
2.0
12
1.0
1N6316 US
4.7
2.8
20
16
1500
90
0.5
1.27
1.5
5.0
12
1.0
1N6317 US
1N6318 US
1N6319 US
1N6320 US
1N6321 US
1N6322 US
1N6323 US
1N6324 US
1N6325 US
1N6326 US
1N6327 US
1N6328 US
1N6329 US
1N6330 US
1N6331 US
1N6332 US
1N6333 US
1N6334 US
1N6335 US
1N6336 US
1N6337 US
1N6338 US
1N6339 US
1N6340 US
1N6341 US
1N6342 US
1N6343 US
1N6344 US
1N6345 US
1N6346 US
1N6347 US
1N6348 US
1N6349 US
1N6350 US
1N6351 US
1N6352 US
1N6353 US
1N6354 US
1N6355 US
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
3.3
4.3
5.2
6.0
6.6
7.5
8.4
9.1
10
11
11.9
13.8
14.7
16.6
18.5
20.4
22.3
25.2
28
30.9
33.7
36.6
40.4
44.2
48
52.7
58.4
64.1
70.8
77.4
86
94.5
104
113
122
141
151
170
189
20
20
20
20
20
20
20
20
20
20
9.5
8.5
7.8
7.0
6.2
5.6
5.2
4.6
4.2
3.8
3.4
3.2
3.0
2.7
2.5
2.2
2.0
1.8
1.7
1.5
1.4
1.3
1.1
1.0
0.95
.85
.80
.68
.65
14
8.0
3.0
3.0
4.0
5.0
6.0
6.0
7.0
7.0
8.0
10
12
14
18
20
24
27
32
40
50
55
65
75
85
100
125
155
180
220
270
340
500
600
850
1000
1200
1500
1800
1300
1200
800
400
400
400
500
500
550
550
550
600
600
600
500
500
500
500
500
600
600
700
800
900
1000
1200
1300
1500
1600
1800
2100
2400
2800
3200
4100
4500
5000
5600
6500
83
76
68
63
57
52
47
43
39
35
33
28
27
24
21
19
18
16
14
13
12
11
9.9
9.0
8.3
7.6
6.8
6.3
5.7
5.2
4.7
4.3
3.9
3.5
3.3
2.8
2.7
2.4
2.1
0.4
0.4
0.3
0.35
0.4
0.4
0.5
0.5
0.5
0.55
0.55
.70
.75
.85
.95
1.05
1.15
1.30
1.45
1.60
1.75
1.90
2.10
2.25
2.50
2.70
2.90
3.20
3.40
3.80
4.20
4.40
4.80
5.20
5.60
7.00
7.50
9.00
12.0
1.17
1.10
0.97
1.23
1.16
1.07
0.97
.89
.83
.77
.71
.62
.58
.52
.47
.43
.39
.35
.31
.28
.26
.24
.22
.20
.18
.17
.15
.13
.125
.115
.100
.095
.085
.080
.070
.065
.060
.050
.045
2.0
2.5
3.5
4.0
5.0
6.0
7.0
8.0
8.5
9.0
9.9
11
12
14
15
17
18
21
23
25
27
30
33
36
39
43
47
52
56
62
69
76
84
91
99
114
122
137
152
5.0
5.0
5.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
.05
12
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1.0
2.0
5.0
5.0
5.0
20
40
80
100
100
100
100
100
100
100
100
100
100
100
100
100
100
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
pF
2000
1900
1800
1650
1600
1400
1350
1300
1200
1150
1050
1000
900
800
700
600
500
450
400
350
325
300
275
260
240
220
200
185
175
170
165
155
145
135
130
120
110
105
100
95
90
70
70
65
65
60
55
NOTE 1: Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively, e.g. 1N6309CUS, 1N6335DUS, etc.
NOTE 2: Voltage regulation VZ(reg) is the measured voltage change at thermal equilibrium between the current of 10% and 50%
of Maximum Zener Current IZM when the lead temperature is maintained at 25°C =+8°C, -2°C.
Copyright  2005
2-02-2005 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
1N6309 thru 1N6355
1N6313 US
o
%/ C
-.085
-.080
-.075
-.065
-.055
+.020
-.043
+.025
-.030
+.030
-.028
+.032
+.045
+.050.
060
.062
.068
.075
.076
.079
.082
.083
.079
.082
.083
.085
.086
.087
.088
+.090
.091
.092
.093
.094
.095
.095
.096
.097
.097
.098
.098
.099
.099
.110
.110
.110
.110
.110
.110
.110
.110
Max.
Cap.
@
OV
WWW . Microsemi .C OM
ELECTRICAL CHARACTERISTICS
1N6309US thru 1N6355US
SCOTTSDALE DIVISION
VOIDLESS-HERMETICALLY-SEALED
Surface Mount 500 mW Glass Zener Diodes
WWW . Microsemi .C OM
MAXIMUM POWER DISSIPATION - MILLIWATTS
GRAPHS
ENDCAP TEMPERATURE – DEGREES CELSIUS
PACKAGE DIMENSIONS
1N6309 thru 1N6355
Copyright  2005
2-02-2005 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3