5V OCXO Low profile HCD300 & HCD301 Specifications HCD300: Sine output HCD301: HCMOS / TTL compatible output Product Parameters Frequency range: 15.00 (max) Frequency stability: ±5x10-9 / day at despatch ±5x10-7 / year max ±5x10-8 per 5% change in VDD 쮿 쮿 쮿 쮿 쮿 쮿 5.00 Temperature stability: ±5x10-8 over -20 to +60°C 쮿 쮿 Operating temperature range: -20 to +60°C Other options from -40°C 쮿 왏 쮿 왏 Storage temperature range: -40 to +90°C 쮿 쮿 27.20 (max) 4 8.90 2 8.90 1 5 PIN CONNECTION 1 Freq adjustment 2 Ref voltage out 3 Supply 4 RF output 5 Ground & case BOTTOM VIEW Scale 1:1 Features ➠ ➠ ➠ ➠ ➠ 5V supply Standard European IEC CO-08 pin-out Cost effective AT cut crystal Custom options available Output waveform: Sine wave, 1.5V p-p ±0.5V into 50⏲ HCMOS / TTL compatible Frequency adjustment: ±5x10-6 typ (10MHz), +0.5 to +4.0V (sufficient for 10 years ageing min) Stabilised +4.0V supply provided 쮿 specify 쮿 쮿 쮿 Supply voltage (VDD): +5.0V (±0.25V) 쮿 쮿 Power consumption: 4.5W max at switch on < 1.0W typ when stabilised at 25°C 쮿 쮿 쮿 쮿 Warm up: ±5x10-8 after 10mins at +25°C 쮿 쮿 Phase noise (@ 10.0MHz): < -105dBc/Hz @ 10Hz < -125dBc/Hz @ 100Hz < -145dBc/Hz @ 1kHz < -150dBc/Hz @ 10kHz < -150dBc/Hz @ 50kHz 쮿 쮿 쮿 쮿 쮿 쮿 쮿 쮿 쮿 쮿 IEC 68-2-27 Test Ea 50G for 11ms 쮿 쮿 Vibration: IEC 68-2-06 Test Fc 10-55Hz, 1.5mm. 55-500Hz, 10G 쮿 쮿 Shock: Option Codes 쮿 쮿 25.40 3 HCD301 4.5 ~ 50.0MHz 4.0 ~ 60.0MHz 36.10 (max) 0.80Ø HCD300 쮿 Standard. 왏 Optional - Please specify required code(s) when ordering Ordering Information Product name + variant + frequency eg: HCD300 10.0MHz HCD301 5.0MHz Option code X (eg HCD301/X) denotes a custom specification. Tel: +44 1460 256 100 10 Jul 2001 Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com