ETC SA-A46B

CRYSTAL CLOCK OSCILLATORS
Data Sheet 0021D
Rev. C
CMOS (TTL Compatible)
HA-460 Series
Description
The HA-460 Series of quartz crystal oscillators are resistance welded in an all metal package, offering RFI
shielding, and are designed to survive standard wave soldering operations without damage. Insulated
standoffs to enhance board cleaning are standard.
Features
• Wide frequency range–0.5MHz to 30.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• High shock resistance, to 3000g
• All metal, resistance weld, hermetically sealed
package
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Low power consumption
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• High frequencies due to proprietary design
• Gold plated leads - Solder dipped leads available
upon request
• CMOS and TTL output levels
Electrical Connection
Pin
1
4
5
8
Connection
N.C.
Grd & Case
Output
VDD
Dimensions are in inches and MM.
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
Data Sheet 0021D
CRYSTAL CLOCK OSCILLATORS
Rev. C
HA-460 Series Continued
CMOS (TTL Compatible)
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter
Frequency
Duty Cycle
Logic 0
Symbol
--------VOL
Logic 1
VOH
Rise & Fall Time
Jitter, RMS(2)
Frequency Stability (1)
tr,tf
----dF/F
Conditions
----@ VDD/2
@ 600µA
@ 16mA
@ 600µA
@ 16mA
10-90%VO
----Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
Min
0.5MHz
45/55%
--------VDD-0.2V
VDD-0.4V
---------100ppm
Typical
-------------------------------------
Max
30.0MHz
55/45%
0.2V
0.4V
--------3 ns
8.0 psec
+100ppm
Min
4.5V
0.0 mA
0.0 mA
0°C
-55°C
---------------------
Typical
5.0V
-------------------------------------
Max
5.5V
30 mA
±16.0 mA
70°C
125°C
210 mW
300°C
15pf
2 ms
10 ms
General Characteristics
Parameter
Supply Voltage
Supply Current
Output current
Operating temperature
Storage temperature
Power Dissipation
Lead temperature
Load
Start-up Time
Symbol
VDD
IDD
IO
TA
TS
PD
TL
----ts
Conditions
----No Load
----------------Soldering, 10 sec.
----<20MHz
20MHz or greater
Environmental and Mechanical Characteristics
Mechanical Shock
Thermal Shock
Vibration
Soldering Condition
Hermetic Seal
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-833, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
300°C for 10 seconds
Leak rate less than 1 x 10-8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
Test Load:
Creating a Part Number
HA - A46X - FREQ
Package Code
HA Leaded 4 pin (8 pin)
SA Leaded 4 pin (8 pin) SMD
Gull Wing
Input Voltage
Code Specification
A
3.3V
5V
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
9 Customer Specific
A ±20ppm 0-70°C
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com