Product Data Sheet TC-350 Series Low Profile TCXO’s Temperature Compensated Crystal Oscillators Features • • • • • • Frequency from 1 to 77.76 MHz ±1.0 ppm, -40°C to +85°C Low Profile: 3.81 mm (0.15”) Ht. Aging <5 ppm for Ten Years 3.3 Vdc or 5 Vdc operation TTL/HCMOS Output Applications • • • • • SMC Clock SONET/SDH Network Timing Sources Wireless Communications Satellite Communications Portable Test Equipment Description Vectron International has introduced a series of low profile surface mount, Temperature Compensated Crystal Oscillators (TCXO’s) available in frequencies from 1 to 77.76 MHz. The TC-350 series surface mount TCXO can be mounted using the standard convection reflow process. Current drain to less than 5 mA is available upon request. Aging <5 ppm for ten years. For additional information about TCXO’s visit our website at: www.tcxo.com TC-350 Series Low Profile TCXO’s Performance Characteristics Parameter Standard Frequencies: Package: Supply Voltage (Vdd): (Other options are available upon request) Current: Output: Characteristics 10.00, 12.80, 13.00, 16.384, 19.44, 20.00, 20.48, 27.00 MHz Available from 1.0 MHz to 77.76 MHz 22.86 x 17.78 x 3.81 mm (0.90” x 0.70” x 0.15”) C = 5.0 Vdc ±5% D = 3.3 Vdc ±5% Current draw will vary greatly depending on frequency and output type. For this series TCXO typical current draw will be about 10 mA. Please consult the factory about your exact current requirements. A = HCMOS/ACMOS B = 10 TTL Voh min. 0.8 Vdd 2.4 Vdc Voh max. 0.5 Vdc 0.5 Vdc 5 ns max. 10 ns max. 50% ±10% 50% ±10% Load: 100k ohm // 10 pF 10 TTL Temperature Stability: B-507 = ±5.0 x 10-7 B-106 = ±1.0 x 10-6 C-507 = ±5.0 x 10-7 C-106 = ±1.0 x 10-6 D-757 = ±7.5 x 10-7 D-156 = ±1.5 x 10-6 F-106 = ±1.0 x 10-6 F-206 = ±2.0 x 10-6 G-156 = ±1.5 x 10-6 G-256 = ±2.5 x 10-6 Rise/Fall Time: Symmetry (Duty Cycle): Aging (typical): Frequency vs. Supply: Electrical Frequency Adjust: over over over over over over over over over over 0°C to +50°C 0°C to +50°C 0°C to +70°C 0°C to +70°C -20°C to +70°C -20°C to +70°C -40°C to +85°C -40°C to +85°C -55°C to +85°C -55°C to +85°C NOTE: Tighter stabilities and wider temperature ranges are available, please consult the factory. <5 ppm for ten years @ +70°C <±0.1 ppm for a ±5% change in Supply Voltage ±5 ppm minimum via external voltage, 0 to Vdd Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com 2 TC-350 Series Low Profile TCXO’s Outlline Drawing 2.54 ( .100) 22.86 ( .900) 1 2 17.78 ( .700) 4 2.54 ( .100) 3.81 ( .15) 7.62 ( .300) .100 mm '# (in)) .100 .045R 4 places 3 Pin I 2 3 4 Function Output Freq. Adj. GND Supply Recommended Pad Layout 3.175 SQ (.125) 7.62 (.300) Pad Layout for 350 Package 17.78 (.700) 12.7 (.500) mm '# (in)) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com 3 TC-350 Series Low Profile TCXO’s Recommended Reflow Profile pre-heating 60 to 90 sec. at 150°C to 170°C reflow 20 to 40 sec. at > 200°C Note: TCXO’s are precision subsystems with tolerances measured to 0.01 ppm. NonHermetically sealed TCXO’s should not be subjected to a wash process that will immerse the TCXO in solvents. NO CLEAN is the recommended procedure. The TC-350 series of TCXO’s has been designed for pick and place reflow soldering. The suggested reflow profile is shown above. The TCXO may be relfowed one time in the non-inverted state. Typical frequency shift as a result of reflow is <1.0 ppm per reflow. VI recommends waiting at least two hours after reflow below measuring the unit. Output Loads Vdd Vdd .01µF .01µF DUT PROBE Vdd PROBE OUT DUT RL D1 OUT CL R1 6k (A) HCMOS / ACMOS (B) TTL R2 270Ω D2 C1 .01µF D3 D4 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com 4 TC-350 Series Low Profile TCXO’s Standard Shipping Method The Standard ship method for volume production of the TC-350 series is in a matrix tray. These trays are 100% recyclable. The trays also offer the added feature that they can be continuously feed into a pick-n-place machine eliminating the down time required with tape-n-reel. 12 15/16 0.44 0.20 Deep VI Logo 0.44 0.25 4.00 0.15 0.95 0.25 0.15 Pin 1 this corner 3 x 13 Array / 39 units per tray 0.75 Handling Precautions Although protection circuitry has been designed into this device, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. VI employs a human-body model *HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are depending on the circuit parame- ters used to define the mode. Although no industry-wide standard has been adopted for the CDM, a standard HBM (resistance =1500 ohms, capacitance - 1000 pf) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained by using these circuit parameters. ESD Threshold Voltage Model Threshold Unit Human-Body (HBM) 500 V min Charged-Device 500 V min Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com 5 TC-350 Series Low Profile TCXO’s Ordering Information TC - 350 Product Family TC = TCXO - D A G - 256 A - 12.80 MHz Output Frequency 1.0 to 77.76 MHz Package 350 = SMT package Supply Voltage C = 5.0 Vdc ±5% D = 3.3 Vdc ±5% Output Type A = HCMOS / ACMOS B = 10 TTL Pin 1 Options A = Standard, No Options (Default) Temperature Stability B-507 = ±5.0 x 10-7 over 0°C to +50°C -6 0°C to +50°C B-106 = ±1.0 x 10 over 0°C to +70°C C-507 = ±5.0 x 10-7 over -6 C-106 = ±1.0 x 10 over 0°C to +70°C -7 D-757 = ±7.5 x 10 over -20°C to +70°C D-156 = ±1.5 x 10-6 over -20°C to +70°C F-106 = ±1.0 x 10-6 over -40°C to +85°C F-206 = ±2.0 x 10-6 over -40°C to +85°C G-156 = ±1.5 x 10-6 over -55°C to +85°C G-256 = ±2.5 x 10-6 over -55°C to +85°C Note: Other stabilities are available upon request. Visit our website at www.vectron.com For additional information please contact: USA: Vectron International • 267 Lowell Road, Hudson, NH 03051 . . . . . Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 3328 4784 17 Fax: 49 (0) 3328 4784 30 ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: +86 21 28909740 / 41 /42 Fax: +86 21 28909240 / 2890999 www.vectron.com Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. ©2001, Vectron International. Rev.04Jan02, 19Aug02