SSDI SDA113CLDB

SDA113 Series
Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
DESIGNER’S DATA SHEET
7.5 A / 1000V
THREE PHASE BRIDGE
RECTIFIER ASSEMBLY
Part Number / Ordering Information 1/
SDA113 __ __ __
│ │ └ Lead Bend 3/ __ = Straight Leads
│ │
UB = Up Bend
│ │
DB = Down Bend
│ │
│ └ Terminals 2/ 3/ L = Copper Leads
│
_ = Turret Terminals
│
└ Voltage A = 50 V
B = 100 V
C = 200 V
D = 400 V
E = 600 V
F = 800 V
G = 1000 V
Features:
•
•
•
•
•
•
•
Higher Blocking Voltage Available. Contact Factory.
High Output Current 7.5 Amps
Low Reverse Leakage Current
Constructed with Void-free, Hermetically Sealed Discretes
Aluminum Case for Maximum Thermal Conductivity
Small Package Size (1.500 x 0.875 x 0.310”)
TX and TXV & S Level Screening Available
• Fast, Ultra Fast, & Hyper Fast Versions Available.
Contact Factory.
Maximum Ratings
Peak Repetitive and Peak Surge Reverse Voltage
Average Rectified Forward Current 4/
(Resistive Load, 60 Hz Sine Wave)
TC = 55°C
TC = 100°C
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg)
Operating & Storage Temperature
Maximum Thermal Resistance, Junction to Case
SDA113 ( L )
Lead Dia = .050”
Symbol
Value
Units
VRRM
VRSM
VR
See Voltage Key
Volts
Io
7.5
5.5
Amps
IFSM
50
Amps
Top & Tstg
-55 to +150
ºC
RθJC
4.5
ºC/W
SDA113
Lead Length = 0.5” min
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0047A
DOC
SDA113 Series
Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Electrical Characteristic 5/
Symbol
Min
Typ
Max
Units
VF1
––
––
1.1
Volts
Reverse Leakage Current
(Rated VR, TA = 25ºC, 300 µsec pulse minimum)
IR1
––
––
5
µA
Reverse Leakage Current
(Rated VR, TA = 100ºC, 300 µsec pulse minimum)
IR2
––
––
50
µA
Instantaneous Forward Voltage Drop
(TA = 25°C, 300 - 500 µsec pulse)
IF = 3A
NOTES:
*
1/
2/
3/
4/
5/
Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2%
For Ordering Information, Price, and Availability Contact Factory.
For Package Outlines Contact Factory.
Up and Down Bend Configurations are Available for ‘__’ ( Leaded ) Packages Only.
Derate Linearly at 0.28A/ºC for TC > 55ºC.
Unless Otherwise Specified, All Electrical Characteristics @25ºC.
Mounting Diagram: 2/
Thickness = 0.340” max