3.0x2.5mm BI-COLOR SMD CHIP LED LAMPS ® Kingbright KPB-3025 Package Dimensions Features l3.0mmx2.5mm SMT LED 1.1mm THICKNESS. -COLOR,LOW POWER CONSUMPTION. lWIDE VIEWING ANGLE. lIDEAL FOR BACKLIGHT AND INDICATOR. lVARIOUS COLORS AND LENS TYPES AVAILABLE. lBI Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Part No. KPB-3025ESGW KPB-3025ESGC KPB-3025EYW KPB-3025EYC KPB-3025SGYW KPB-3025SGYC Dice Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) YELLOW (GaAsP/GaP) HIGH EFFICIENCY RED (GaAsP/GaP) YELLOW (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) YELLOW (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) YELLOW (GaAsP/GaP) WHITE DIFFUSED WATER CLEAR WHITE DIFFUSED WATER CLEAR WHITE DIFFUSED WATER CLEAR Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 1-KPB3025-1 Iv (mcd) @ 20 mA Min. Typ. 5 3.2 5 3.2 5 3.2 5 3.2 3.2 3.2 3.2 3.2 12.5 12.5 12.5 12.5 12.5 8 12.5 8 12.5 8 12.5 8 Viewing Angle 2θ1/2 120° 120° 120° 120° 120° 120° Electrical / Optical Characteristics at T A=25°C Symbol Parameter Device λpeak Peak Wavelength High Efficiency Red Yellow Super Bright Green ∆λ1/2 Spectral Line Halfwidth C Typ. Max. Units Test Conditions 625 590 565 nm IF=20mA High Efficiency Red Yellow Super Bright Green 45 35 30 nm IF=20mA Capacitance High Efficiency Red Yellow Super Bright Green 12 10 45 pF VF=0V;f=1MHz vF Forward Voltage High Efficiency Red Yellow Super Bright Green 2.0 2.1 2.2 V IF=20mA IR Reverse Current All 10 uA VR = 5V 2.5 2.5 2.5 Absolute Maximum Ratings at T A=25°C Parameter High Efficiency Red Yellow Super Bright Green Units Power dissipation 105 105 105 mW DC Forward Current 30 30 25 mA Peak Forward Current [1] 150 150 150 mA 5 5 5 V Reverse Voltage Operating/Storage Temperature -40 °C To +85 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 1-KPB3025-2 High Efficien Red / Super Bright Green KPB-3025ESG High Efficiency Red / Yellow KPB-3025EY 1-KPB3025-3 Super Bright Green / Yellow KPB-3025SGY KPB-3025 Series SMT Reflow Soldering Instructions 1-KPB3025-4 KPB-3025 Series Recommended Soldering Pattern KPB-3025 Series Tape Specifications (Units : mm) 1-KPB3025-5