Part NO. :KRB031 PCB TYPE PHOTOINTERRUPTER *Dimensions *Features Note:All units are in millimeters unless otherwise indicated. Ultra-compact with a 6.0mm width photointerrupter and 3mm width slot. PCB surface mounting type. High resolution with a 0.5mm width aperture. *Absolute Maximum Ratings (Ta=25°C) * Parameter Symbol Rating Unit Forward current[1] IF 25 mA Reverse voltage VR 5 V Power dissipation Pd 35 mW Collector-emitter voltage VCEO 20 V Emitter-collector voltage VECO 5 V Collector current IC 20 mA Collector power dissipation PC 75 mW Operating temperature Topr -30~+85 °C Storage temperature Tstg -40~+90 °C Soldering temperature[2] Tsol 240 °C Manual soldering[2] Tsol 300 °C Input Output Notes:1.Refer to the temperature ratingchart if the ambient temperature xceeds Unless otherwise.,the tolerances are ±0.15mm. 25°C. 2.Complete soldering within 10 seconds for reflow soldering and within 3 seconds for manual soldering. *Electrical / Optical Characteristics at TA=25°C Value Parameter Input Output Symbol Conditions Min. Typ. Max. Forward voltage VF - 1.1V 1.3V IF=5mA Reverse current IR - - 10µA VR=5V Peak Wavelength λp - 940nm - IF=20mA Collector current IC 50µA 150µA - IF=5mA,VCE=5V Collector dark current ID - - 100nA VCE =10V,0LX Cullector-emitter saturation voltage VCE(sat) - 0.1V 0.4V IC=50µA, IF=20mA Peak spectral sensitivity wavelength λp - 920nm - - Rise time tr - 8µsec - Fall time tf - 10µsec - VCC=5V, RL=1KΩ IC=100µA SPEC NO: DSAE6490 REV NO: V.1 DATE: OCT/13/2004 APPROVED: J. Lu CHECKED: Tracy Deng DRAWN: Y.CHENG PAGE: 1 OF 4 Part NO. :KRB031 SPEC NO: DSAE6490 REV NO: V.1 DATE: OCT/13/2004 APPROVED: J. Lu CHECKED: Tracy Deng DRAWN: Y.CHENG PAGE: 2 OF 4 Part NO. :KRB031 SPEC NO: DSAE6490 REV NO: V.1 DATE: OCT/13/2004 APPROVED: J. Lu CHECKED: Tracy Deng DRAWN: Y.CHENG PAGE: 3 OF 4 Part NO. :KRB031 Reel Dimensions (Units : mm) Tape Specifications (Units : mm) Tape quantity 1000pcs/reel SPEC NO: DSAE6490 REV NO: V.1 DATE: OCT/13/2004 APPROVED: J. Lu CHECKED: Tracy Deng DRAWN: Y.CHENG PAGE: 4 OF 4