3.65x6.15mm SINGLE CHIP LED LIGHT BARS ® Kingbright L-1043I HIGH EFFICIENCY RED L-1043G GREEN L-1043SR SUPER BRIGHT RED L-1043Y YELLOW L-1043SG SUPER BRIGHT GREEN L-1049EG HIGH EFFICIENCY RED / GREEN L-1049SRSG SUPER BRIGHT RED / SUPER BRIGHT GREEN Package Dimensions Features lFLAT RECTANGULAR LIGHT EMITTING SURFACE. lSINGLE & DUAL COLORS. lTHIRD (MIXED) COLOR AVAILABLE FOR 3 LEADS VERSION. lIDEAL AS FLUSH MOUNTED PANEL INDICATORS. lEXCELLENT ON/OFF CONTRAST. lLONG LIFE - SOLID STATE RELIABILITY. Description The Green and Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Selection Guide Part No. Dice Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Lens Type Iv (mcd) @ 10 mA Viewing Angle Min. Max. 2θ1/2 L-1043ID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED 5 20 100° L-1043GD GREEN (GaP) GREEN DIFFUSED 2 8 100° L-1043YD YELLOW (GaAsP/GaP) YELLOW DIFFUSED 2 8 100° L-1043SRD SUPER BRIGHT RED (GaAlAs) RED DIFFUSED *32 *100 100° L-1043SGD SUPER BRIGHT GREEN (GaP) GREEN DIFFUSED *5 *12.5 100° *8 *20 100° L-1049EGW L-1049SRSGW-CC HIGH EFFICIENCY RED (GaAsP/GaP) GREEN (GaP) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT GREEN (GaP) WHITE DIFFUSED WHITE DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.*Luminous intensity with asterisk is measured at 20mA. *2 *8 100° *32 *100 100° *20 *50 100° Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions Peak Wavelength High Efficiency Red Green Yellow Super Bright Red Super Bright Green 625 565 590 660 565 nm IF=20mA Spectral Line Halfwidth High Efficiency Red Green Yellow Super Bright Red Super Bright Green 45 30 35 20 30 nm IF=20mA C Capacitance High Efficiency Red Green Yellow Super Bright Red Super Bright Green 12 45 10 95 45 pF VF=0V;f=1MHz vF Forward Voltage High Efficiency Red Green Yellow Super Bright Red Super Bright Green 2.0 2.2 2.1 1.85 2.2 V IF=20mA IR Reverse Current All uA VR = 5V λpeak ∆λ1/2 2.5 2.5 2.5 2.5 2.5 10 Absolute Maximum Ratings at TA=25°C Parameter Power dissipation High Efficiency Red Green Yellow Super Bright Red 105 105 105 100 Super Bright Green Units 105 mW DC Forward Current 30 25 30 30 25 mA Peak Forward Current [1] 150 150 150 150 150 mA 5 5 5 5 5 V Reverse Voltage -40 °C To +85 °C Operation/Storage Temperature 260 °C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. 6-L1043-2 High Efficiency Red L-1043ID Green L-1043GD 6-L1043-3 Yellow L-1043YD Super Bright Red L-1043SRD 6-L1043-4 Super Bright Green L-1043SGD High Efficiency Red / Green L-1049EGW 6-L1043-5 Super Bright Red / Super Bright Green L-1049SRSGW-CC 6-L1043-6