14.2mm (0.50INCH) SEVEN SEGMENT DISPLAY SA50-21GWA GREEN Features Description !0.50 INCH DIGIT HEIGHT. The Green source color devices are !LOW CURRENT OPERATION. made with Gallium Phosphide Green !EXCELLENT CHARACTER APPEARANCE. Light Emitting Diode. ! EASY MOUNTING ON P.C. BOARDS OR SOCKETS. !I.C. COMPATIBLE. !CATEGORIZED FOR LUMINOUS INTENSITY, !MECHANICALLY RUGGED. ! STANDARD : GRAY FACE, WHITE SEGMENT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change whitout notice. SPEC NO: DSAB0250 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: MAR/18/2002 DRAWN:L.ZHANG PAGE: 1 OF 3 Selection Guide Par t No . Iv (u c d ) @ 10 m A Dic e SA50-21GWA GREEN(GaP) Min . Ty p . 47 0 0 16000 D es c r i p t i o n Common Anode, Rt. Hand Decimal Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Halfwidth Green 30 nm IF=20mA pF VF=0V;f=1MHz 2.5 V IF=20mA 10 uA V R = 5V C Capacitance Green 15 VF Forward Voltage Green 2.2 IR Reverse Current Green Max . Absolute Maximum Ratings at T)=25°°C P ar am e t e r Gr een Un it s Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: DSAB0250 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: MAR/18/2002 DRAWN:L.ZHANG PAGE: 2 OF 3 Green SA50-21GWA SPEC NO: DSAB0250 APPROVED : J. Lu REV NO: V.1 CHECKED : DATE: MAR/18/2002 DRAWN:L.ZHANG PAGE: 3 OF 3