T-1(3mm) BI-COLOR INDICATOR LAMP W115WEGW HIGH EFFICIENCY RED / GREEN Features Description !UNIFORM LIGHT OUTPUT. The High Efficiency Red source color devices are !LOW POWER CONSUMPTION. made with Gallium Arsenide Phosphide on Gallium !MILKY WHITE DIFFUSION LENS. Phosphide Orange Light Emitting Diode. !3 The Green source color devices are made with LEADS WITH ONE COMMON LEAD. ! THIRD COLOR (MIXED COLOR) AVAILABLE. Gallium Phosphide Green Light Emitting Diode. !I.C. COMPATIBLE. ! LONG LIFE - SOLID STATE RELIABILITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO:DSAD2084 APPROVED: J.LU REV NO: V.1 CHECKED: Allen Liu DATE:APR/13/2003 DRAWN:Y.H.LI PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e Iv (m c d ) @ 20 m A L en s Ty p e Min . Ty p . 10 40 10 35 HIGH EFFICIENCY RED (GaAsP/GaP) W115WEGW V i ew i n g An g l e 2θ 1/2 60° WHITE DIFFUSED GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er λpeak Peak Wavelength High Efficiency Red Green λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un its Tes t Co n d it io n s 627 565 nm I F =20mA High Efficiency Red Green 625 568 nm I F =20mA igh Efficiency Red Spectral Line Half-width H Green 45 30 nm I F =20mA pF VF=0V;f=1MHz V I F =20mA uA V R= 5 V C Capacitance High Efficiency Red Green 15 15 VF Forward Voltage High Efficiency Red Green 2.0 2.2 IR Reverse Current All 10 Max . 2.5 2.5 Absolute Maximum Ratings at TA=25°°C P ar am et er H i g h E f f i c i en c y R ed Gr een Un its Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO:DSAD2084 APPROVED: J.LU REV NO: V.1 CHECKED: Allen Liu DATE:APR/13/2003 DRAWN:Y.H.LI PAGE: 2 OF 3 High Efficiency Red / Green SPEC NO:DSAD2084 APPROVED: J.LU W115WEGW REV NO: V.1 CHECKED: Allen Liu DATE:APR/13/2003 DRAWN:Y.H.LI PAGE: 3 OF 3