PIN Photodiode KODENSHI HPI-2C・HPI-2CR2 DIMENSIONS (Unit : mm) The HPI-2C is a high-speed, high-output silicon PIN photodiode, mounted in a low profile ceramic package. The HPI-2CR2 photodiode, with daylight filter, is available in the same package. FEATURES •High-output power •High-speed response •Low dark current •Thin ceramic package (t=1.5mm) APPLICATIONS •Fiber optic communications •Optical switches HPI-2C MAXIMUM RATINGS Item Reverse voltage Power dissipation Operating temp. Storage temp. Soldering temp. *1 HPI-2CR2 (Ta=25℃) Symbol Rating Unit VR PD Topr. Tstg. Tsol. 20 100 -20~+70 -40~+80 260 V mW ℃ ℃ ℃ *1.For MAX.5 seconds at the position of 2 mm from the package ELECTRO-OPTICAL CHARACTERISTICS Item Symbol Open circuit voltage Short circuit current Sensitivity Dark current Curve factor Capacitance Temperature coefficient of VOC Temperature coefficient of ISC Spectral sensitivity Peak wavelength Half angle VOC ISC S Id C.F. Ct αt βt λ λp Δθ (Ta=25℃) Conditions Min. HPI-2C Typ. Max. HPI-2CR2 Typ. Max. Min. 0.3 12 0.4 0.38 14 0.4 EV=1,000lx*2 VR=5V 0.1 0.1 0.55 0.55 V=0V, f=1MHz *2.Color temp.=2856K standard Tungsten lamp - 1- 20 -2.2 0.18 450~1,050 920 ±60 20 -2.2 0.18 700~1,050 940 ±60 Unit. V μA A/W μA pF mV/℃ %/℃ nm nm deg. PIN Photodiode HPI-2C・HPI-2CR2 Light current Vs. Forward voltage Relative sensitivity Vs. Wavelength Short circuit current Vs. Illuminance Dark current Vs. Ambient temperature Dark current Vs. Reverse voltage Radiant Pattern Capacitance between terminals Vs. Reverse voltage - 2-