DiMeNsion - 3 DVD Recorder Solution ™ Ser vo, Video Decoder and System Processor OVERVIEW The LSI Logic DiMeNsion™-3 comprehensive DVD recorder solution includes a single-chip DVD recorder DSP servo + analog front end (AFE); a family of analog video decoders; and a third-generation DoMiNo™-based DVD recorder processor. The DiMeNsion-3 solution is intended for higher performance, yet cost-sensitive, worldwide DVD recorder and combination products. The high level of integration of the DiMeNsion-3 solution drastically reduces system component count, and consequently system cost. Figure 1 shows a block diagram of an advanced DVD recorder based on the DiMeNsion-3 solution. With its unique Unified Memory Architecture (UMA), the entire system requires only a single DRAM and Flash device. Integrated Real Time Clock and low power standby mode eliminate the need for a front panel microcontroller. In addition to enabling cost-effective designs, the DiMeNsion-3 solution enables higher-end features, including SACD and DVD Audio for universal audio players; MPEG-4 and DivX® encoding and playback, enabling up to 12 hours of recording on a single DVD disc; SD to HD up-conversion and HD JPEG; LSI Logic’s Direct Digital Dub™ technology to simplify the transfer of personal digital content from a camcorder to DVD over FireWire; and new, more advanced edge filtering and deinterlacing capabilities to provide impressive noise reduction on analog inputs and eliminate video blurring in moving scenes via DoMiNoFX™ technologies. The DoMiNoFX industry-leading pre- and post-processing video technologies create a visibly superior viewing experience. This coupled with LSI Logic’s fifth-generation compression technology, offers excellent video quality, even at very low bit rates. DiMeNsion-3 SYSTEM FEATURES • All major silicon components of a DVD+R/+RW, DVD-R/-RW DVD recorder • Unified memory architecture requiring single DRAM and Flash devices for complete system • Store up to 12 hours of analog video on DVD in MPEG-4 format • MPEG-4 and DivX® encode and playback • DVD Audio and SACD playback DRAM • CD/VCD/DVD playback RF Tuner IEC 958 • Simultaneous interlaced and Video In Audio DACs Audio In Audio Decoder ADC IEEE1394 1394 PHY Audio Out Video Out HD Digital USB ROM/Flash progressive video outputs • Connect to digital still cameras and memory cards via the USB port • View brilliant JPEG pictures in high definition DVD VFD Display Figure 1: DVD Recorder System Based on the DiMeNsion-3 Solution DiMeNsion ™-3 DVD Recorder Solution Servo, Video Decoder and System Processor DiMeNsion-3 SYSTEM FEATURES CONTINUED • Convert standard definition video to digital high definition • DoMiNoFXTM technologies for the highest video quality • Archive DV camcorder content on DVD with single remote control operation (Direct Digital DubTM) DMN-8603 DEVICE FEATURES • Single x16 DDR SDRAM operation • Dedicated device interface for L3200 servo controller with integrated AFE • Integrated MPEG4 Codec for up to 12 hours of video recording on optical disc • Integrated RTC and low power standby mode eliminates front panel microcontroller DSP SERVO + AFE The L3200 optical read/write DSP servo with integrated AFE is optimized for consumer recorder applications to reduce overall system costs. With industry-leading integration for DVD recorder drives, the L3200 provides a glueless interface and does not require additional DRAM or Flash. The L3200 supports both record and playback from DVD+R/+RW and DVD-R/-RW media and playback from DVD, CD, CD-R/-RW and SACD. ANALOG VIDEO DECODER The DiMeNsion-3 solution offers a family of analog video decoders to cost-effectively address a variety of DVD recorder models with different requirements in different regions. The L2150 video decoder is designed to address worldwide, entry-level models. It includes 9-bit video ADCs and supports both NTSC and PAL. The L2146 is optimized to address higher-quality video recorder models in North America and Europe by supporting RGB and Component analog inputs. It includes 10-bit video ADCs and supports both NTSC and PAL. DVD RECORDER SYSTEM PROCESSOR A true system-on-a-chip solution, the DoMiNo 8603 (DMN-8603) reduces cost, design complexity, power consumption and time-to-market, and offers broadest feature set with the best image quality. In addition to including a CPU and graphics engine, the DMN-8603 integrates an NTSC/PAL TV encoder, a third-generation DV codec, an MPEG-4 codec, SACD decoder, and a USB controller. 27MHz or 32KHz 13.5MHz Crystal Crystal • SACD playback with L3200 8-bit YUV V_IN I2S A_In IEEE1394 Link Link USB USB Core Power Ground JTAG RTC/ Standby V_OUT Digital Video OUT DMN-8603 A_OUT IEC 958/1937 Host Interface DRAM Bitstream/ Storage Flash Memory DRAM SD+/ATAPI SIO Figure 2: DMN-8603 DVD Recorder Processor YPbPr/RGB (prog. or interlaced) CVBS, Y/C (interlaceed) HD Digital I2S S/PDIF UART IR Remote IR Blaster SPI IDC The DMN-8603 accepts video from broadcast TV and other analog video sources and compresses and formats the video for storage on DVD in industry-standard recordable formats. The DMN-8603 supports simultaneous record and playback operations. With its thirdgeneration DV codec, the DMN-8603 supports archiving digital camcorder content to a DVD. The DMN-8603 offers the longest record time in the industry while continuing to offer the industry’s best video quality. The DMN-8603 enables brilliant display of JPEG pictures through High Definition JPEG available only with the DoMiNo architecture. The USB controller allows for connectivity with flash memory cards and digital still cameras. DMN-8603 DEVICE FEATURES (CONTINUED) • Flexible video DSP, video scaling and motion estimation processors • SD to HD up-conversion and digital high definition output avoids conversion to analog • High definition JPEG - a unique DoMiNo feature • Low power standby mode CAPABILITIES For DVD video recording applications, the DMN-8603 supports video compression in compliance with the MPEG-1, MPEG-2, MPEG-4 and DV-25 specifications, and video decompression in compliance with the MPEG-1, MPEG-2, DV-25, and MPEG-4 ASP* specifications. The DMN-8603 also enables transcoding between DV-25 and MPEG-2 and MPEG-2 to MPEG-4. The product supports corresponding audio compression and decompression in compliance with the Dolby Digital CE, MPEG-1 Layer 3 and MPEG-1 layer 2 specifications. The DMN-8603 supports recording on DVD-RW/-R, and DVD+RW/+R media using +VR, -VR, DVD-V or DivX® formats and provides complete DVD recordable drive buffer management. The DMN-8603 can support either half-duplex (separate recording or playback) or full-duplex (simultaneous recording and play back) operations on the DVD recordable drive. For DVD playback applications, the product supports the playback of DVD-Video disks with Dolby Digital 5.1, MPEG-1 layer 2 and DTS audio encoding, disks encoded with DivX® technology, MPEG-1 VCD and SVCD disks. For audio playback applications, the product supports the decoding of DVD-Audio disks (MLP), SACD, MPEG-1 layer 3 (MP3), Windows Media Audio (WMA) and CD-DA formats. The DMN-8603 also performs all audio post-processing tasks such as 3D audio effects and bass management functions ARCHITECTURE The DoMiNo architecture - the foundation of the DMN-8603 product - represents the optimal balance between hardware and software. • Integrated TV encoder and video DACs • High performance memory controller for support of up to 128MB of external SDRAM • Third-generation DV codec with enhanced functions • IEEE1394 link layer with 5C content protection and AV/C protocol support • Integrated USB controller • 2D graphics engine (native 24-bit RGB with 8 bit alpha) with DVD sub-picture decode • Serial I/O interface controller for infrared port, SPI, I2C and UART DiMeNsion ™-3 DVD Recorder Solution Servo, Video Decoder and System Processor Repetitively executed, computationally complex pixel processing tasks are accelerated in hardware execution units. Higher-level data processing is performed on standard RISC processors, permitting substantial product flexibility and use of industry-standard development tools. The DMN-8603 is compatible with the LSI Logic C-Ware™ architecture, which provides a standardized API that is reusable across LSI Logic DoMiNobased consumer digital video products, fully preserving software investment. C-Ware is integrated with the Wind River Systems® VxWorks RTOS and is For more information please call: LSI Logic Corporation Headquarters 1621 Barber Lane Milpitas, CA 95035 Tel: 866.574.5741 (within U.S. and Canada) 1.408.954.3108 (outside U.S. and Canada) Technical Support: 800.633.4545 supported by an industry-leading software development tool-chain. Summary of Specifications for DiMeNsion-3 Solution Video Interface Sales Office Locations www.lsilogic.com/contacts Corporate Website www.lsilogic.com Input One 8-bit YUV 4:2:2 video stream Output Digital: ITU-R BT.656 interlaced (SD)/SMPTE 274M (1080i)/SMPTE 296M (720P) Analog: Support for NTSC/PAL (B,D,G,H,I), CVBS, Y/C, Analog component video RGB or SMPTE YcbCr outputs. Simultaneous Interlaced and progressive video outputs Audio Interface Inputs 2 Channels, I2S compatible, 16-24 bits/sample Outputs 8 channels, I2S compatible, 16-24 bits/sample, S/PDIF I/O Low speed serial UART, SPI, IR, IR Blaster, I 2 C Storage Dedicated interface for L3200 Optical Ser vo with AFE Record & Playback: DVD+R/+RW, DVD-R/-RW Playback: DVD, CD, CD-R/-RW, SACD High speed serial USB: Two full speed USB ports IEEE1394: With AV/C Processing A/V Codec Single Stream, full-duplex, audio and video codec with SD-HD up-conversion Encode formats MPEG2 MP@ML, MPEG4 ASP*, DivX , MPEG1, DV-25, DDCE, MP3 Decode formats MPEG2MP@ML, DivX ®, MPEG1, MPEG4, DV-25, AC-3, DDCE, MLP, SACD, AAC, DTS, MP3, WMA Logical disk formats DVD-V, DVD-VR (DVD-R, DVD-RW), DVD+VR (DVD+R, DVD+RW) Encryption/Decr yption CPPM, CPRM, CSS, 5C ® System Standby mode Low power standby mode Real Time Clock Internal RTC operating with a 32KHz Crystal and battery backup Graphics 2D OSD - up to 24 bit/pixel RGB with 8-bit alpha blending with flicker free filter and video scaler Memory Memory Single x16 DDR or x32 (DDR or SDR). Up to 128MB Unified memor y architecture supporting single DRAM and Flash in a complete DVD Recorder (when used with L3200) LSI Logic, LSI Logic logo, DoMiNo, DoMiNoFx DiMeNsion, Direct Digital Dub and C-Ware are trademarks or registered trademarks of LSI Logic Corporation. All other brand and product names may be trademarks of their respective companies. LSI Logic Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI Logic does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by LSI Logic; nor does the purchase, lease, or use of a product or service from LSI Logic convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Logic or of third parties. Copyright ©2004 by LSI Logic Corporation. All rights reserved. Order No. I20120 1204.JG.W - Printed in USA