Yellow Green 180° Angle Ceramic Chip CR 10 YG Features Solid State Ceramic Chip Surface Mounting Device High Power Thermal Absorbtion Superior Light Uniformity Over 180° End to End Side to Side Stackable Down to a Pitch of 1,33mm Solder Pads Conform to Mil−Std 883B Best Brightness for Human Eye Response Water Clear Lens Applications Ideal For Back Light Applications Custom Configurations o Maximum Ratings (Ta=25 C) Characteristic Symbol Max. Unit Forward Current IF 75 mA Reverse Voltage VR 60 V Power Dissipation PD 130.00 mW Operating Temperature Topr −25 ~ +80 Storage Temperature Tstg −25 ~ +120 Soldering Temperature Soldering Time Tsol 250 − for 10 sec. max o C o C o C − o Opto−Electrical Characteristics (Ta=25 C) Characteristic Symbol Test Condition Min Typ Max Forward Voltage VF IF=20mA − 2.20 2.40 V Reverse Current IR VR=5V − − 100 µA Luminous Intensity IV IF=20mA 2.80 7.20 − mcd o Unit 2θ1/2 − − 180 − deg. λp IF=20mA − 570 − nm Dominant Wavelength λd IF=20mA − 564 − nm Spectral Line Half Width ∆λ IF=20mA − 25 − nm Viewing Angle Peak Wavelength Company Headquarters 120 Broadway Menands, New York 12204 Toll Free: 800.984.5337 Fax: 518.432.7454 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Yellow Green 180° Angle Ceramic Chip CR 10 YG Graphs Company Headquarters 120 Broadway Menands, New York 12204 Toll Free: 800.984.5337 Fax: 518.432.7454 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314