NJM2567 Low Voltage Video Amplifier with Y/C MIX and Filter GENERAL DESCRIPTION PACKAGE OUTLINE NJM2567 is a low voltage operating video amplifier included LPF,BPF In Y and C system. Output with 75ohm driver optimize the TV monitor system. The NJM2567 includes power saving circuit, suitable for portable video NJM2567V Application, camcorder and others. FEATURES z Operating Voltage 2.8 to 5.5V z Internal 6dB Amp. and 75ohm Driver z Internal LPF(Y),BPF(C) z Bipolar technology z Package Outline SSOP14 PIN CONFIGURATION 14 13 12 11 10 9 8 1. V+1 2. NC 3. Yin 4. Vref 5. Cin 6. GND1 7. Power Save 1 2 3 4 5 6 8. Cout 9. GND2 10. Vsag 11. Vout 12. V+2 13. Ysag 14. Yout 7 BLOCK DIAGLAM V+1 Yin V+2 GND1 CLAMP LPF GND2 6dB Yout Ysag Vref VREG -6dB 12dB PS Vout Vsag Cin BIAS BPF 6dB Cout -1Ver.6 NJM2567 ■ ABSOLUTE MAXIMUM RATINGS(Ta=25°C) PARAMETER Supply Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL V+ PD Topr Tstg RATINGS 7.0 300 -40 to +85 -40 to +125 UNIT V mW °C °C ■ RECOMMENDED OPEARATING CONDITION(Ta=25°C) PARAMETER Operating Voltage 1 Operating Voltage 2 -2Ver.6 SYMBOL Vopr1 Vopr2 RATINGS + V1 V+2 MIN. 2.8 2.8 TYP. MAX. UNIT 5.5 V 5.5 V NJM2567 ■ ELECTRICAL CHARACTERISTICS (V+1= V+2=3V, Powersave=3V, RL=150Ω, Ta=25°C at non-designation) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. Operating Circuit 1 Operating Circuit 2 Operating Circuit 1 at Power Save Operating Circuit 2 at Power Save Voltage Gain (Y Signal) UNIT + - 12.0 16.0 mA + V 2=5.0V, No signal - 10.0 15.0 mA Isave1 V+1=5.0V, Power Save Mode - 40 80 µA Isave2 V+2=5.0V, Power Save Mode - 0 5 µA ICC1 ICC2 V 1=5.0V, No signal Gvy Yin=100kHz,1.0Vpp Input Sin Signal 6.1 6.5 6.9 dB Voltage Gain (C Signal) Gvc Yin=4.43MHz,0.3Vpp Input Sin Signal 6.1 6.5 6.9 dB Voltage Gain (V Signal) Gvv Yin=100kHz,1.0Vpp Input Sin Signal Yin=6MHz/100kHz, 1.0Vpp Input Sin Signal Yin=20MHz/100kHz, 1.0Vpp Input Sin Signal Cin=±1MHz/4.43MHz, 0.3Vpp Input Sin Signal Cin=20MHz/4.43MHz 0.3Vpp Input Sin Signal 6.1 6.5 6.9 dB -0.5 0 +0.5 - -25 - -0.5 0 +0.5 - -25 - Gfy1 Gfy2 Frequency Characteristics Gfc1 Gfc2 Group Delay Characteristic (Y Signal) Group Delay Characteristic (C Signal) Maximum Output Voltage Swing (Y Signal) Maximum Output Voltage Swing (C Signal) Maximum Output Voltage Swing (V Signal) Voym Differential Gain(Y Signal) DGy Differential Phase(Y Signal) DPy Differential Gain(V Signal) DGv Differential Phase(V Signal) DPv SW Change Voltage High Level for Power Save SW Change Voltage Low Level for Power Save dB TdY Yin=4.43MHz, Sin Signal - 60 TdC Cin=4.43MHz, Sin Signal - 60 1.1 1.2 - Vp-p 0.7 1.1 - Vp-p 1.1 1.2 - Vp-p - 0.3 - % - 0.3 - deg - 0.3 - % - 0.3 - deg 1.4 - V+ V 0 - 0.6 V Vocm Vovm Yin=100kHz, Sin Signal, THD=1%, RL=75Ω Cin=4.43MHz, Sin Signal, THD=1%, RL=75Ω Yin=100kHz, Sin Signal, THD=1%, RL=75Ω Yin=1.0Vpp,10Step video signal, measure the Yout. Yin=1.0Vpp,10Step video signal, measure the Yout. Yin=1.0Vpp,Cin=0.3Vpp, 10Step video signal,measure the Vout. Yin=1.0Vpp,Cin=0.3Vpp 10Step video signal,measure the Vout. VCH Active VCL Non-active ns ns -3Ver.6 NJM2567 ■ ELECTRICAL CHARACTERISTICS (V+1= V+2=3V, Powersave=3V, RL=150Ω, Ta=25°C at non-designation) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. Yin to Cout=20log(Cout/Yout) Crosstalk 1(Yin to Cout) CTyc -50 Yin=4.43MHz,1.0Vpp Sin Signal, Cin=AC GND Cin to Yout=20log(Yout/Cout) Crosstalk 2(Cin to Yout) CTcy Cin=4.43MHz,0.3Vpp Sin Signal, -50 Yin=AC GND Yin=100% White Video Signal, 60 S/N1(Y Signal) SNy RL=75Ω at Yout Bandwidth 100kHz to 6MHz Cin=100% Red Field Video Signal, S/N2(C Signal) SNc1 60 RL=75Ω at Cout, AM Noise Bandwidth 100KHz to 500kHz Cin=100% Red Field Video Signal, S/N3(C Signal) SNc2 60 RL=75Ω at Cout, PM Noise Bandwidth 100KHz to 500kHz Yin=100% White Video Signal, 60 S/N4 (V Signal) SNv RL=75Ω at Vout Bandwidth 100kHz to 6MHz 2nd. Distortion 1 Hy Yin=1MHz,1.0Vpp Input Sin Signal -50 (Y Signal) 2nd. Distortion 2 Hc Cin=4.43MHz, 0.3Vpp Input Sin Signal -50 (C Signal) 2nd. Distortion 3 Hv Yin=1MHz,1.0Vpp Input Sin Signal -50 (V Signal) ■ CONTROL TERMINAL PARAMETER Power Save -4Ver.6 CONTROL H L OPEN NOTES Power Save: OFF Power Save: ON Power Save: ON UNIT dB dB dB dB dB dB dB dB dB NJM2567 ■ TEST CIRCUIT 75Ω 75Ω 75Ω Yout2 Vout2 Cout2 75Ω 75Ω Yout1 75Ω Vout1 + 100uF Cout1 22uF + + 100uF 22uF + + 100uF 14 13 12 11 10 9 8 Yout Ysag V+2 Vout Vsag GND2 Cout NJM2567 V+1 NC Yin VREF Cin GND1 POWER SAVE 1 2 3 4 5 6 7 + 0.1uF 10uF 0.1uF + + Yin 50Ω 0.1uF Cin 75Ω 50Ω 75Ω [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -5Ver.6