NTE NTE7101

NTE7101
Integrated Circuit
AF Power Amplifier, 7W
Description:
The NTE7101 is an audio power amplifier in an 8–Lead SIP type package designed for use in car radio
and car stereo applications. This device features a low thermal resistance providing easy design for
2Ω load circuits and 4Ω load BTL circuits.
Features:
D High Output Power:
PO = 7W Typ @ RL = 4Ω, THD = 10%, VCC = 14.4V
PO = 11W Typ @ RL = 2Ω, THD = 10%, VCC = 14.4V
PO = 18W (Bridge) @ RL = 4Ω, THD = 10%, VCC = 14.4V
D Low Distortion: THD = 0.1% Typ @ RL = 4Ω, PO = 500mW
D High Reliability
D Protection Circuits Include:
Load Dump Voltage Surge
Thermal Overload
Output DC and AC Short Circuit to GND or VCC
Reverse Insertion
D Minimum External Components Required
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Surge Supply Voltage (PW = 200ms), VCCsurge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
Quiescent Supply Voltage (Note 1), VCC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
Operational Supply Voltage, VCC2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V
Peak Circuit Current, ICCpeak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5A
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12W
Operating Temperature Range (Note 1), Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +75°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C
Note 1. Using an aluminum heat sink 100mm x 100mm x 1mm.
Recommended Operating Conditions: (TA = +25°C unless otherwise specified)
Parameter
Supply Voltage Range
Load Impedance
Symbol
Test Conditions
Min
Typ
Max
Unit
VCC
9.5
–
16.0
V
RL
2
–
16
Ω
Electrical Characteristics: (TA = +25°C, f = 1kHz, RL = 4Ω unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
Circuit Current
ICC
υin = 0, VCC = 13.2V
25
45
80
mA
Output Power
PO
RL = 4Ω, THD = 10%, VCC = 13.2V
5.0
5.8
–
W
RL = 4Ω, THD = 10%, VCC = 14.4V
–
7.0
–
W
RL = 2Ω, THD = 10%, VCC = 13.2V
–
9.2
–
W
RL = 2Ω, THD = 10%, VCC = 14.4V
–
11.0
–
W
RL = 4Ω, PO = 500mW, VCC = 13.2V
–
0.1
1.0
%
RL = 2Ω, PO = 1W, VCC = 13.2V
–
0.4
–
%
49.0
51.5
54.0
dB
–
1.4
4.0
mVrms
Total Harmonic Distortion
THD
Voltage Gain
Aυ
PO = 500mW
Output Noise Level
υn
RG = 10kΩ
Pin Connection Diagram
(Front View)
8 VCC
7 Bootstrap
6 Output
5 GND (For Output)
4 GND (For Input)
3 Feedback
2 Bypass
1 Input
.142 (3.6)
.800 (20.3)
.362
(9.2)
1
8
.100 (2.54)
.100 (2.54)
.020 (0.50)
.700 (17.78)