E2V0012-37-X1 ¡ electronic components OL3204N-100/P LASER DIODES OL3204N-100/P 1.3 mm High-Power DIP Module with 9mm Profile GENERAL DESCRIPTION The OL3204N-100P is a 1.3 mm high-power laser in a 14-pin DIL package with 9mm profile. Having extreme high output power in pulsed operation, this device can be used in optical measurement equipment like OTDR systems. FEATURES • Fiber output power: Pf=100 mW (pulse width 10 ms, duty ratio 1 %) • Cooled DIL Package, 9mm hight APPLICATIONS • Optical measurement equipment • OTDR PACKAGE DIMENSIONS (Unit: mm) • OL3204N-100/P 1 1.0 7.62 19 f0.9 12.7 25.4 5 20.8 7.1 9 6.35 5.9 24 2.54 3.8 f0.45 TERMINAL CONNECTION (BOTTOM VIEW) #14 (–) LD THERMISTOR CASE FIBER COOLER #8 (+) #7 PIN No. 1 2 3 4 5 6 7 FUNCTION COOLER ANODE NC NC NC LD ANODE and CASE GROUND NC NC #1 PIN No. FUNCTION NC 8 LD CATHODE 9 LD ANODE and 10 CASE GROUND THERMISTOR 11 THERMISTOR 12 NC 13 COOLER CATHODE 14 1/3 LASER DIODES OL3204N-100/P ABSOLUTE MAXIMUM RATINGS Parameter Symbol Test Conditions Ratings Unit Fiber Output Power Pf 110* mW LD Reverse Voltage VR (LD) 2 V LD Forward Current IF (LD) 800* mA 1.2 A Ta=25°C Ic Cooler Current Operating Temperature Topr — –20 to +65 °C Storage Temperature Tstg — –40 to +70 °C *Pulse width less than 10 ms, duty ratio less than 1 % OPTICAL AND ELECTRICAL CHARACTERISTICS ( TLD=25°C, 10 ms Pulse Width and 1 % Duty Ratio) Parameter Symbol Test Conditions Min. Typ. Max. Unit Threshold Current Ith — — 20 50 mA IF=750 mA 100 — — mW Fiber Output Power Pf Center Wavelength lc Pf=100 mW 1290 1310 1330 nm Spectral Width s Pf=100 mW, RMS¥1 — — 10 nm Forward Voltage VF Pf=100 mW — 1.7 3 V Cooler Capacity Cooler Current DT Pf=100 mW 40 — — °C Ic DT=40°C, Pf=100mW — — 1 A Cooler Voltage Vc DT=40°C, Pf=100mW — — 2 V Thermistor Resistance Rth — — 10 — kW FIBER PIGTAIL SPECIFICATIONS Parameter Specifications Unit Single-mode — Mode Field Diameter 10±1 mm Cladding Diameter 125±2 mm Fiber Type Jacket Diameter Length Connector 900 mm 1 (Min.) m FC — 2/3 LASER DIODES OL3204N-100/P TYPICAL CHARACTERISTICS Fiber Output Power vs. Forward Current 100 3 Pf Forward Voltage VF (V) Fiber Output Power Pf (mW) 80 60 VF 40 20 0 2 1 0 0 100 200 300 400 500 Forward Current IF (mA) Oscillation Spectrum 1 Pf=100mW Pulse Relative Intensity 0.8 0.6 0.4 0.2 0 1280 1305 Wavelength(nm) 1330 3/3