DATA SHEET O K I L A S E R P R O D U C T S OL3300N-05 and OL3301N-05 Surface Mount Laser Diode Modules (1310 nm, 0.5 mW) October 1999 ■ ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– CONTENTS OL3300N-05 and OL3301N-05 Surface Mount LD Modules ...................... 1 Oki Semiconductor OL3300N-05 and OL3301N-05 LD Modules Surface Mount LD Modules for Single-Mode Fiber INTRODUCTION Oki Semiconductor’s OL3300N-05/OL3301N-05 family of surface mount laser diode modules feature a 1.3-µm, InGaAsP/InP laser diode providing 1310-nm output at 0.5 mW. These low-cost laser diodes are available in 8-pin Mini-Dil packages, have a built-in monitor photodiode, and are coupled to singlemode fiber pigtails. FEATURES • • • • • • InGaAsP/InP laser diode Fiber output: 1310-nm output at 0.5 mW 1.3-µm technology Single-mode fiber 8-pin Mini-Dil package Includes a photodiode for power monitoring APPLICATION • • • • • • • Optical transmission systems OL3301N-05: OC-48, 2.488 Gbps OL3300N-05: 622 Mbps Gigabit Ethernet Digital video systems LAN systems Optical measurement / OTDRs Oki Semiconductor 1 ■ OL3300N-05 and OL3301N-05 LD Modules ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––– ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (ambient temperature Ta=25°C unless otherwise noted) Parameter Symbol Ratings Units Pf 2 mW Fiber Output Power Laser diode reverse voltage VR(LD) 2 V Photo diode forward current IF(PD) 10 mA Photo diode reverse voltage VR(PD) 15 V Operating Temperature Topr -40 to +85 °C Storage Temperature Tstg -40 to +85 °C Lead Soldering Temperature (1O sec) Tsol 260 °C Exceeding these maximum ratings could cause immediate damage or lead to permanent deterioration of the device. Optical and Electrical Characteristics (Ta=25°C) Parameter Symbol Test Conditions Min. Fiber output power Pf CW 0.5 Threshold current Ith - - Typ. Max. Units - - mW - 40 mA mA Laser diode operating current IOP(LD) Laser diode forward voltage VOP(LD) Pf =0.5 mW --- --- 1.5 V λc Pf =0.5 mW, RMS Ta=0 to 85°C 1270 - 1360 nm σ Pf =0.5 mW, RMS (σ) TER Im=constant@ Pf =0.5 mW (25°C) Center wavelength RMS Spectral width Tracking error Rise and fall time (OL3300N-05) 10 to 90 % Rise and fall time (OL3301N-05) Monitor current Im Pf =0.5 mW 300 7.7 nm 1.5 dB 0.5 ns 0.15 ns 1000 µA Fiber Pigtail Specifications Parameter Specifications Units SM --- Mode Field Diameter 10 +/-1 µm Cladding Diameter 125 +/-2 µm 900 µm 1.0 (Minimum) m FC --- Type Jacket Diameter Length Connector 2 Oki Semiconductor ––––––––––––––––––––––––––––––––––––––––––––––––––––––– ■ OL3300N-05 and OL3301N-05 LD Modules ■ PACKAGE DIMENSIONS (Units: mm) 11.20 1.0 2.50 8 5 7.62 1.8 (TOP VIEW ) 5.60 1 4 0.25 2.54 Typ 1.0 1.75 3.0 Max All dimensions in mm (Typical) 0.46 Typ 0.17 Photo Diode Laser Diode 4 5 6 7 LEAD CONNECTIONS (TOP VIEW) #8 #7 #6 #5 CASE LD FIBER CASE #1 PD CASE CASE #2 #3 #4 Pin Configuration Description Pin Mo. Pin No. Description 01 Case Ground 05 PD Anode 02 Case Ground 06 LD Cathode 03 Case Ground 07 LD Anode 04 PD Cathode 08 Case Ground Oki Semiconductor 3 ■ OL3300N-05 and OL3301N-05 LD Modules ■ ––––––––––––––––––––––––––––––––––––––––––––––––––––––– Notes 4 Oki Semiconductor The information contained herein can change without notice owing to product and/or technical improvements. Please make sure before using the product that the information you are referring to is up-to-date. The outline of action and examples of application circuits described herein have been chosen as an explanation of the standard action and performance of the product. When you actually plan to use the product, please ensure that the outside conditions are reflected in the actual circuit and assembly designs. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters outside the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in connection with the use of product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges, including but not limited to operating voltage, power dissipation, and operating temperature. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,office automation, communication equipment, measurement equipment, consumer electronics, etc.).These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property or death or injury to humans. Such applications include, but are not limited to: traffic control, automotive, safety, aerospace, nuclear power control, and medical, including life support and maintenance. Certain parts in this document may need governmental approval before they can be exported to certain countries. The purchaser assumes the responsibility of determining the legality of export of these parts and will take appropriate and necessary steps, at their own expense, for export to another country. Copyright 1999 Oki Semiconductor Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information furnished by Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is assumed by Oki Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No license is granted under any patents or patent rights of Oki. Oki Semiconductor Oki REGIONAL SALES OFFICES Northwest Area Southwest Area 785 N. Mary Avenue Sunnyvale, CA 94086 Tel: 408/720-8940 Fax: 408/720-8965 2302 Martin Street Suite 250 Irvine, CA 92715 Tel: 979/752-1843 Fax: 979/752-2423 North Central Area 300 Park Blvd. Suite 365 Itasca, IL 60143 Tel: 630/250-1313 Fax: 630/250-1414 Southeast Area 1590 Adamson Parkway Suite 220 Morrow, GA 30260 Tel: 770/960-9660 Fax: 770/960-9682 Northeast Area 138 River Road Shattuck Office Center Andover, MA 01810 Tel: 978/688-8687 Fax: 978/688-8896 Oki Web Site: http://www.okisemi.com For Oki Literature: Call toll free 1-800-OKI-6388 (6 a.m. to 5 p.m. Pacific Time) Oki Stock No: 320141-001 Corporate Headquarters 785 N. Mary Avenue Sunnyvale, CA 94086-2909 Tel: 408/720-1900 Fax: 408/720-1918