FM120 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION FM1100 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 100 Volts CURRENT 1.0 Ampere FEATURES * * * * * Ideal for surface mounted applications Low leakage current Metallurgically bonded construction Mounting position: Any Weight: 0.09 gram DO-214AC MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O 0.067 (1.70) 0.051 (1.29) 0.110 (2.79) 0.086 (2.18) 0.180(4.57) 0.160(4.06) 0.012 (0.305) 0.006 (0.152) 0.091 (2.31) 0.067 (1.70) 0.059 (1.50) 0.035 (0.89) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. 0.008 (0.203) 0.004 (0.102) 0.209 (5.31) 0.185 (4.70) Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS FMB120 FMB130 FMB140 FMB150 FMB160 FMB180 FMB1100 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 Volts VDC 20 30 40 50 60 80 100 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Lead Temperature Volts IO 1.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 40 Amps Typical Thermal Resistance (Note 1) RθJA 50 0 Typical Junction Capacitance (Note 2) CJ 110 Operating Temperature Range TJ Storage Temperature Range pF -65 to + 125 T STG C/ W -65 to + 150 -65 to + 150 0 C 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C NOTES : 1. Thermal Resistance (Junction to Ambient). 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. P.C.B Monuted with 0.2X0.2” (5.0X5.0mm 2) copper pad area. VF IR FMB120 FMB130 FMB140 FMB150 FMB160 FMB180 FMB1100 UNITS .55 .70 .85 Volts 1.0 mAmps 10 mAmps 2001-5 RATING AND CHARACTERISTIC CURVES ( FM120 THRU FM1100 ) .75 FM 15 0~ 0~ FM 12 .50 00 14 0 .25 11 FM Single Half Wave 60HZ Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0 0 25 50 75 100 125 150 LEAD TEMPERATURE, ( ) 175 INSTANTANEOUS FORWARD CURRENT, (A) 1.0 FM AVREAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE FIG. 3A - TYPICAL REVERSE CHARACTERISTICS FM120~FM140 TJ = 125 10 1.0 TJ = 75 0.1 TJ = 25 .01 .001 10 20 40 60 80 100 120 TJ = 25 Pulse Width = 300uS .1 .1 1% Duty Cycle .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 INSTANTANEOUS FORWARD VOLTAGE, (V) 100 10 1.0 TJ = 150 0.1 TJ = 125 .01 TJ = 75 FM150~FM160 FM180~FM1100 TJ = 25 FIG. 4 - TYPICAL JUNCTION CAPACITANCE TJ = 25 100 80 60 40 20 10 .1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 5 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) 200 0 140 400 FM120 FM130 FM140 FM150 FM160 FM180 FM1100 1.0 .001 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, (pF) 20 FIG. 3B - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS REVERSE CURRENT (mA) 100 FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 50 40 30 8.3ms Single Half Sine-Wave JEDEC Method 20 10 0 .4 1.0 4 10 REVERSE VOLTAGE, (V) 40 80 1 2 4 6 810 20 40 80100 NUMBER OF CYCLES AT 60Hz