SB10-015P Ordering number : ENN4437B SB10-015P Schottky Barrier Diode 15V, 1A Rectifier Applications • High frequency rectification (switching regulators, converters, choppers). Features • • • • Low forward voltage (VF max=0.55V). Fast reverse recovery time (trr max=10ns). Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Conditions Ratings Unit VRRM VRSM 15 V 17 V Average Output Current IO 1 A Surge Forward Current IFSM 8 A Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle Junction Temperature Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol Conditions VR VF1 IR=300µA IF=1A VF2 IF=100mA IR VR=7.5V C VR=10V, f=1MHz trr Rthj-a 1 IF=IR=100mA, See specified Test Circuit. Rthj-a 2 Mounted on 250mm2✕0.8mm ceramic board Ratings min typ max 15 Unit V 0.55 V 0.40 V 50 µA 30 pF 10 ns 310 °C / W 120 °C / W Marking : SI Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 22004 TS IM / 33098HA (KT) / 53196GI / 92793YH (KOTO) AX-9088 No.4437-1/3 SB10-015P trr Test Circuit 4.5 1.6 100mA Duty≤10% 1.5 3 2 1.5 10Ω 10µs 1.0 0.5 0.4 100Ω 100mA 2.5 4.25max 50Ω 10mA Package Dimensions unit : mm 1163A --5V 1 trr 0.4 3.0 1 : Anode 2 : Cathode 3 : No Contact 0.75 SANYO : PCP IF -- VF Reverse Current, IR -- µA 3 2 --25° C 75° C 25°C 5°C 3 2 0.1 7 5 0.01 7 5 3 0 0.1 0.2 0.3 0.4 0.5 0.6 Forward Voltage, VF -- V 0.7 0.8 100°C 100 7 5 3 2 75°C 50°C 10 7 5 3 2 1.0 7 5 3 2 0.1 0 25°C 2 4 6 Surge Forward Current, IFSM (Peak) -- A 100 7 5 3 2 10 7 8 10 12 14 Reverse Voltage, VR -- V 16 ID00422 IFSM -- t 10 f=1MHz Interterminal Capacitance, C -- pF Ta=125°C 1000 7 5 3 2 ID00421 C -- VR 2 IR -- VR 3 2 1.0 7 5 Ta= 12 Forward Current, IF -- A 3 2 Current waveform 50Hz sine wave IS 8 20ms t 6 4 2 0 5 3 5 7 1.0 2 3 5 7 Reverse Voltage, VR -- V 10 2 3 ID00423 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00424 No.4437-2/3 SB10-015P Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 2004. Specifications and information herein are subject to change without notice. PS No.4437-3/3