CFPX-56 SMD Cylinder Crystals ISSUE 1; 1 SEPTEMBER 2001 Outline in mm 6.5 max 2 x 6 SMD Cylinder Crystal (pre-formed legs) 1.0 General Specification Load Capacitance (CL): 12.5pF standard ■ Drive Level: 1.0µW max 2.0±0.2 3.0±0.2 ±20ppm Operating Temperature Range ■ 0~0.25 Standard Frequency Tolerance ■ 2.0+0.1 -0.2 ∅0.25±0.05 ■ 2.2max ■ 2.54±0.2 Description 0.7±0.1 Please contact our sales office for current leadtimes –10 to 60°C Ageing ■ High Temperature Storage Test: +85°C for 24 hours. Frequency variation <±5ppm. ESR variation <±10% 8.0±0.10 4.0 ±0.10 2.0±0.10 ∅1.55±0.05 Solder Condition For typical soldering conditions, please see the relevant page in Application Notes 2.55 ■ 3.40 ■ CFPX-56 surface mount crystals are available packaged on trays or on tape and reel 0.50 0.50 Packaging 9.70 Shock Test: Dropping from 75cm height to a wooden plate 3 times. Frequency variation <±5ppm. ESR variation <±10% 7.5 ±0.10 ■ 0.50 Environmental Tests 1.75±0.10 Outline in mm - Tape 2.50 ±5ppm max in 1st year 5.50 ■ 16.0 Marking Outline in mm - Reel ` 16.5±0.1 +0.5 ∅21.5-1 2.0 ±0.5 21.5±0.1 ∅330.0 ±1.5 120° ( 3 equal) +0.3 Frequency only ∅13.0 -0.1 ■ ∅100.0 ±1.5 SURFACE MOUNT QUARTZ CRYSTALS ■ 1.9±0.1 Delivery Options Frequency Range Frequency Tolerance @ 25°C ±2°C 32.7680kHz ±20ppm Operating Temperature Range Frequency Stability Available Over Operating Temperature Minimum Maximum 0 to 50°C –25ppm –100ppm –10 to 60°C –50ppm –100ppm ESR max. Vibration Mode 40kΩ Fundamental X cut SURFACE MOUNT QUARTZ CRYSTALS Electrical Specification – maximum limiting values