Super-luminosity/High-luminosity Numeric LED Digit Type Character height (mm) Type of display Common pins ■ Super-luminosity/High-luminosity Numeric LED Figures shown below are values per segment. U (Red) Model No. (Ta=25˚C) T (Red) Luminous intensity (mcd) Luminous intensity (mcd) GL9T030 GL8T030 GL9T040 GL8T040 GL9T156 GL8T156 GL9T08 GL8T08 GL9T100 GL8T100 TYP. 4.0 4.0 4.25 4.25 5.25 5.25 2.2 2.2 9.5 9.5 Mold Type ■ Absolute Maximum Ratings ■ Electro-optical Characteristics Character height Radiation color (mm) 8.0/10.16/14.12/20.32 25.4, 38.1, 76.0 25.4, 38.1 (Notice) T U T Page 10 9 → 8 6 4 GL7T201 GL6T201 GL3T422 GL3T421 GL3T508D GL3T507D 4.25 4.25 1.5 1.5 1.5 1.5 Derating factor (mA/ ˚C) DC Pulse 0.36 1.82 0.36 2.73 0.36 1.82 Peak emission wavelength λp(nm) TYP. 660 660 660 3 Reverse voltage VR (V) 5 6 5 Operating temperature Topr. (˚C) -30 to +70 -30 to +70 -30 to +70 → Spectrum radiation bandwidth ∆λ(nm) TYP. 20 20 20 12 19 → 21 (Ta=25˚C) Storage temperature Tstg. (˚C) -40 to +80 -40 to +80 -40 to +80 Figures shown below are values per segment. Forward current VF TYP. MAX 1.7 2.2 3.5 4.8 3.4 4.4 Figure 1 Figures shown below are values per segment. Peak forward current Character height Radiation Forward current IF IFM*1 color (mm) (mA) (mA) 8.0/10.16/14.12/20.32 T 20 100 25.4, 38.1, 76.0 U 20 150*2 25.4, 38.1 T 20 100 *1 Duty ratio=1/10, Pulse width=0.1ms *2 U type duty ratio=1/16, pulse width=0.1ms Outline dimensions → Mold Type Multi-digits 1-digit *1 TYP. A 8.0 K A 10.16 K A 14.12 K A 20.32 K A GL9U100 35.0 25.4 K GL8U100 35.0 A GL9U15 27.0 38.1 K GL8U15 27.0 A GL9U30 (120)* Substrate 76.0 Type K GL8U30 (120)* A 10.16 K A 8.0 K A 7.6 K *1 A: Anode common K: Cathode common * Production after order confirmation * As for current conditions, refer to IF in electro-optical characteristics Model No. (Ta=25˚C) IF (mA) 10 10 10 Reverse current IR(µA) MAX. 10 100 10 VR (V) 4 5 4 ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 140 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) Numeric LED Characteristics Diagrams T series Forward Current Derating Curve Forward Current vs. Forward Voltage* 40 30 20 500 Relative luminous intensity(%) Forward current IF(mA/seg) Forward current IF(mA/seg) 50 20 10 5 3 2 Mold type 10 -20 0 20 40 60 80 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 100 Ambient temperature Ta(˚C) 100 50 10 -20 0 Luminous Intensity vs. Forward Current (Duty ratio1/10) 20 40 60 80 100 Ambient temperature Ta(˚C) Forward voltage VF(V/seg) Peak Forward Current Derating Curve 350 200 20 1 0 (1F=20mA/seg) 1000 50 60 Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 (Ta=25˚C) 500 300 300 250 200 150 Mold type 100 Peak forward current IF(mA/seg) 200 Relative luminous intensity(%) Peak forward current IFM(mA/seg) Luminous Intensity vs. Ambient Temperature (Ta=25˚C) 100 70 100 50 20 10 5 50 1 0.1 -20 0 20 40 60 80 100 50 Mold type 30 10 2 0 100 5 0.2 Ambient temperature Ta(˚C) 0.5 1 2 5 10 20 50 1/50 1/20 Forward current IF(mA/seg) 1/10 1/5 1/2 1 Duty ratio DR * In case of 25.4mm: value per 1segment 1chip D series Forward Current Derating Curve Forward Current vs. Forward Voltage* Substrate type 45.0mm 30 Mold type 20 500 Relative luminous intensity(%) 40 Forward current IF(mA/seg) 50 20 10 5 3 2 10 -20 0 20 40 60 80 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 100 Ambient temperature Ta(˚C) 50 10 -20 0 20 40 60 80 100 Ambient temperature Ta(˚C) Luminous Intensity vs. Forward Current (Duty ratio1/10) Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 (Ta=25˚C) 500 300 60 50 40 Mold type 30 20 Peak forward current IF(mA/seg) 200 Relative luminous intensity(%) Peak forward current IFM(mA/seg) 100 Forward voltage VF(V/seg) Peak Forward Current Derating Curve 70 200 20 1 Substrate type 0 (1F=20mA/seg) 1000 50 60 Forward current IF(mA/seg) Luminous Intensity vs. Ambient Temperature (Ta=25˚C) 100 70 100 50 20 10 5 Substrate type 45.0mm 100 50 30 Mold type Substrate type Substrate type 10 10 2 0 -20 0 20 40 60 80 100 Ambient temperature Ta(˚C) 1 0.1 5 0.2 0.5 1 2 5 Forward current IF(mA/seg) 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Duty ratio DR * In case of 25.4/45.0mm: value per 1segment 1chip ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 145 Numeric LED Characteristics Diagrams P series Forward Current Derating Curve Forward Current vs. Forward Voltage* 20 15 Mold type 10 Substrate type 5 500 Relative luminous intensity(%) Forward current IF(mA/seg) 20 10 5 3 2 0.5 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 Forward voltage VF(V/seg) 0 -20 0 20 40 60 Ambient temperature Ta(˚C) 80 100 Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current (Duty ratio1/10) 70 200 100 50 20 1 10 -20 0 20 40 60 Ambient temperature Ta(˚C) 80 100 Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 (Ta=25˚C) 500 300 200 50 100 Relative luminous intensity(%) 60 40 Mold type Substrate type 30 20 Peak forward current IF(mA/seg) Forward current IF(mA/seg) 25 (1F=5mA/seg) 1000 50 30 Peak forward current IFM(mA/seg) Luminous Intensity vs. Ambient Temperature (Ta=25˚C) 100 35 50 20 10 5 10 -20 0 20 40 60 80 1 0.1 100 Substrate type 50 30 Mold type 10 2 0 100 5 0.2 Ambient temperature Ta(˚C) 0.5 1 2 5 10 Forward current IF(mA/seg) 20 1/50 50 1/20 1/10 1/5 Duty ratio DR 1/2 1 U series Forward Current Derating Curve Forward Current vs. Forward Voltage* 20 15 10 5 500 Relative luminous intensity(%) Forward current IF(mA/seg) 20 10 5 3 2 0 -20 0 20 40 60 Ambient temperature Ta(˚C) 80 0.5 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0 Forward voltage VF(V/seg) 100 Peak Forward Current Derating Curve Luminous Intensity vs. Forward Current (Duty ratio1/10) 200 100 50 20 1 10 -20 0 20 40 60 Ambient temperature Ta(˚C) 80 100 Duty Ratio vs. Peak Forward Current (Ta=25˚C) 500 (Ta=25˚C) 500 300 150 Relative luminous intensity(%) 200 100 50 Peak forward current IF(mA/seg) Forward current IF(mA/seg) 25 (1F=20mA) 1000 50 30 Peak forward current IFM(mA/seg) Luminous Intensity vs. Ambient Temperature (Ta=25˚C) 100 35 100 50 20 10 5 -20 0 20 40 60 Ambient temperature Ta(˚C) 80 100 1 0.1 100 50 30 10 2 0 150 5 0.2 2 5 10 0.5 1 Forward current IF(mA/seg) 20 50 1/50 1/20 1/10 Duty ratio DR 1/5 1/2 1 * In case of 25.4/38.1/76.0mm: value per 1segment 1chip (Notice) ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 144 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) Numeric LED 2 22.0 10.0 66.0 1 10 1 10.16 10.16 (2.54✕4) Segment name A F G B 5.08✕7mm 35.5✕ E 5 C D D.P. 5 Internal connection diagram GL9❏18 GL8❏18 A B C D E F G D.P. 6 7 8 5 2 3 4 10 A B C D E F G D.P. 6 7 8 5 2 3 4 10 9 9 C D.P. 7 11 4 27.9 S GL9E100 E ø0.55 C D 1 7 D.P. 4 11 4 11 ø3.0 Segment name 4.0 MIN.8.0 7.0 E C D 1 (Yellow-green) GL9❏❏100 Series GL8❏❏100 Series GL8❏❏100 11 5 7.6 19.0 (Red) 22.86 1 Luminous intensity rank ø2.0 Segment name B G A B C D E F G D.P. 9 8 5 2 1 12 14 6 6 8 A F ø0.55 10 S GL8❏08 11.0 7˚ 1.8(Segment width) 6 27.0 20.32 27.9 11.2 33.0 25.4 2.7(for all segment width) Luminous intensity rank 14 4 GL8❏100 A B C D E F G D.P. 9 8 5 2 1 12 14 6 GL9❏100 Series GL8❏100 Series 9.4 22.8 2.54✕6= 15.24 GL9❏100 A B C D E F G D.P. 9 8 5 2 1 12 14 6 11 S GL9E100 14.7 7˚ 4.0 MIN. 9.0 7.5 B G 2.54✕6= 15.24 Internal connection diagram A B C D E F G D.P. 9 8 5 2 1 12 14 6 GL9❏15 Series GL8❏15 Series (Notice) 8 A F 9.26 4.5 D B Segment name GL8❏15 A B C D E F G D.P. 9 8 5 2 1 12 14 6 (Red) D.P. ø3.0 14 4.0 MIN. 9.0 7.5 E A G 1 Internal connection diagram GL9❏15 11 D 11.2 33.0 25.4 44.0 S GL8U15 13.0 Segment name 14 8 10-ø0.55 2.54✕6= 15.24 Internal connection diagram GL9❏❏100 B C 2.7(for all segment width) Luminous intensity rank 9.4 22.8 ø4.8 F 5 G Luminous intensity rank 14.0 37.0 4 14.7 7˚ 4 17.0 38.1 51.0 21.0 7˚ A F GL9❏18 Series GL8❏18 Series 3.9(Segment width) 3 Segment name E A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 F1 F2 G1 G2 D.P. A1 A2 B1 B2 C1 C2 D1 D2 E1 E2 F1 F2 G1 G2 D.P. 11 12 9 10 6 7 3 4 1 2 13 14 15 16 8 11 12 9 10 6 7 3 4 1 2 13 14 15 16 8 GL9❏30 Series GL8❏30 Series 4-ø5.5MAX. (Calking) 10.16 ø4.0 14.5 35.0 0.5MA✕. (Calking) 25.0 ø9.6 7.5 Internal connection diagram 15.0 22.0 10.0 33.0±0.5 20.0 30.5 45.0±0.5 33.0±0.5 36.0 15.0 9.0 1.6 1.0 for all space 10˚ 59.0 52.0 45.0 7.5 34.0 8 28.0 76.0±0.4 2-ø3.3 6-ø3.0±0.15 86.0✕ 7.0 0.8 24.0 3.0(Segment width) 45.0±0.5 9 76.0±0.4 98.0±0.5 16 8.0(Segment width) +1.3 42.0±0.3 10˚ 1.3 -0.15 1 Outline Dimensions(Unit:mm) 7 D.P. A B C D E F G D.P. 9 8 5 2 1 12 14 6 4 (Yellow-green) Internal connection diagram A F G 10-ø0.45 2.54✕4 =10.16 GL9❏08 A B C D E F G D.P. 7 6 4 2 1 9 10 5 3 8 B C E D D.P. GL8❏08 A B C D E F G D.P. 7 6 4 2 1 9 10 5 3 8 GL9❏08 Series GL8❏08 Series ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 148 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) Numeric LED Outline Dimensions(Unit:mm) 5 7.6 19.0 6.41 17.0 14.12 22.86 9.26 27.0 20.32 ø2.0 4.85 12.2 Luminous intensity rank A F G E 2.54✕4 =10.16 9P156 109 8 7 6 0.5 A E 8 (Red) 3 (Yellow-green) D 4.0 Luminous intensity rank 10˚ 1.0(for all segment width) GL9❏040 GL8❏040 A B C D E F G D.P. 10 9 8 5 4 2 3 7 A B C D E F G D.P. 10 9 8 5 4 2 3 7 6 1 GL9❏030 7 6 1.75 12 2.0✕4=8.0 10 9 8 7 D 6 D.P. A F E G B C GL8❏030 D.P. 7 A B C DE FG 1 10 8 5 4 2 3 9 6 9 6.6 1.0 4.0 7.0 G1 2.54 2.54✕8= 20.32 1 D1 1.0 G2 C1 E2 D2 2-ø1.6 1.5 1.0 7.0 4.0 5.8 4.3 24.0±0.4 B2 Luminous intensity rank C2 0.9 9 15.24 0.25+0.15 -0 5.08 1.9 6.2 4.3 Segment name & Pin No. Luminous intensity rank 18 10 Dig.2 Dig.1 F1 A1 B1 F2 A2 E1 0.3(for all space) 9.0 10.16 18.0 ±0.3 15.24 0.25 2-ø1.7 1.0(for all segment width) 10˚ 6.41 17.0 14.12 S GL7D220 1.25 0.5 3.5 5.3 Internal connection diagram 0.3(Space) 6.35 11.2 25.0 1 2 3 4 5 0.25+0.15 -0 GL9❏030 Series GL8❏030 Series 1.3(Segment width) 1.5 6.35 4.5 Segment name & Pin No. D.P. 6 A B C DE FG 1 10 8 5 4 2 3 GL9❏040 Series GL8❏040 Series 8˚ 1.0 5.0 7.0±0.3 4.0 Segment name & Pin No. 1 10 A 2 F B 9 3 G 8 4 E C 7 5 D 6 D.P. 7.62 8.0 ±0.4 11.0 ø0.9 2.2 0.5 1.0 7.0 0.25 8.12 0.3(for all space) 2.54✕4=10.16 GL9S040 4.58 10.16 13.0 6.5 .2 1.35 11 8 -0 0.5 +0.15 1.35 10 ø1 1 3 2.54✕4=10.16 D.P. 3 0. (for all space) 1.0 (for all segment width) Internal connection diagram 8 C GL9❏156 Series GL8❏156 Series Luminous intensity rank 4.8 3.2 9.6 3 B GL9T030 5.6 10˚ G 12345 8 (Red) GL9❏❏08 Series GL8❏❏08 Series 9 GL8❏156 A B C D E F G D.P. 7 6 4 2 1 9 10 5 A B C D E F G D.P. 7 6 4 2 1 9 10 5 Segment name 7 6 4 2 1 9 10 5 A B C D E F G D.P. GL8❏❏08 F 3 (Yellow-green) Internal connection diagram GL9❏156 D.P. D 7 6 4 2 1 9 10 5 A B C D E F G D.P. GL9❏❏08 B C 4.0 Internal connection diagram 7.0 4.0 MIN. 8.0 Segment name 10-ø0.45 0.25 ø1.7 7.0 1 1.3(for all segment width) 8˚ 0.3 (for all space) R S GL9ED08 G 6 10 8.12 8 Luminous intensity rank 15.24 1.8(Segment width) 11.0 7˚ 7 S GL7T201 Segment name & Pin No. 18 10 Dig 1 A1 Dig 2 A2 F1 E1 0.5+0.15 -0 G1 B1 D1C1 F2 G2B2 E2 C2 D2 D.P.1 1 2.54✕8=20.32 9 D.P.2 Internal connection diagram GL7❏220 GL6❏220 D.P1 A1 B1 C1 D1 E1 F1 G1.D.P2 A2 B2 C2 D2 E2 F2 G2 4 16 15 3 2 1 18 17 9 11 10 8 6 5 12 7 D.P1 A1 B1 C1 D1 E1 F1 G1.D.P2 A2 B2 C2 D2 E2 F2 G2 4 16 15 3 2 1 18 17 9 11 10 8 6 5 12 7 14 13 14 13 Dig.1 Dig.2 Dig.1 Dig.2 GL7❏220 Series GL6❏220 Series Internal connection diagram GL7❏201 GL6❏201 A1 B1 C1 D1 E1 F1 G1 D.P1 A2 B2 C2 D2 E2 F2 G2 D.P2 16 15 3 2 1 18 17 4 11 10 8 6 5 12 7 9 A1 B1 C1 D1 E1 F1 G1 D.P1 A2 B2 C2 D2 E2 F2 G2 D.P2 16 15 3 2 1 18 17 4 11 10 8 6 5 12 7 9 14 13 14 13 GL7❏201 Series GL6❏201 Series ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 149 Outline Dimensions(Unit:mm) 25.5 21.9 20.2 10.5 13 0.3 for all space 10˚ 6.0 4.0 1.0 3.0 ±10˚ 2.54✕9=22.86 A2 B2 C2 D2 E2 F2 G2 A2 B2 C2 D2 E2 F2 G2 2345 678 23456 78 16 4-ø5.0MAX. (Calking) 9 Segment name A1 A2 F1 G1 B1 F2 G2 B2 E2 D2 C2 E1 D1 C1 GL6❏206U A1 B1 C1 D1 E1 F1 G1 A2 B2 C2 D2 E2 F2 G2 A1 B1 C1 D1 E1 F1 G1 A2 B2 C2 D2 E2 F2 G2 15 13 1 3 2 14 16 10 12 8 6 7 11 9 15 13 1 3 2 14 16 10 12 8 6 7 11 9 4 4 Dig.1 Dig.2 A1 B1 C1 D1 E1 F1 G1 Dig.2 Dig.1 1 10 Dig.2 GL3❏202 Series GL3❏201 Series 17.0 16.8 4.4 4.4 10˚ 5 Dig.1 Dig.2 5 Dig.1 Dig.2 GL7❏206U Series GL6❏206U Series 16 0.5(Calking) 0.3(Space) 2-R1.1 6 2.2 4.4 ø1Depth0.3 8 10 6.0 1.0 3.0 8 10 10.5 21 Segment name & Pin No. 1 4-ø4.0MAX. (Calking) 9 Internal connection diagram GL6❏208U A1 A1 B1 C1 D1 E1 F1 G1 A2 B2 C2 D2 E2 F2 G2 A1 B1 C1 D1 E1 F1 G1 A2 B2 C2 D2 E2 F2 G2 15 14 3 2 1 16 13 11 10 8 7 6 12 9 15 14 3 2 1 16 13 11 10 8 7 6 12 9 4 4 5 Dig.1 Dig.2 18 9.2 3.5 3 11 Dig.1 Dig.2 0.6(for all segment width) 0.3(for all space) 10˚ 3.6 2.8 2.0 5-ø0.8 3-ø0.9 Segment name S GL3E306 A F G B E 0.35 0.35 6.0 6.5 5.5 6.0 30.0 6.0 5.0 6.5 13.0 8.0 0.3(for all space) 2.54✕5=12.7 11 Dig.2 7.8 1.0(for all segment width) 11-ø0.45 3 Dig.1 GL7❏202 Series GL6❏202 Series 4.0 4.5 2.5 7.0 7.0 7.0 22.0 A1 B1 C1 D1 E1 F1 G1 A2 B2 C2 D2 E2 F2 G2 14 13 4 2 1 15 16 6 5 12 10 9 7 8 Dig.2 GL7❏208U Series GL6❏208U Series 10˚ GL6❏202 A1 B1 C1 D1 E1 F1 G1 A2 B2 C2 D2 E2 F2 G2 14 13 4 2 1 15 16 6 5 12 10 9 7 8 11.5 6.2 Dig.2 0.5 GL7❏202 A2 F2 G2 B2 F1 G1 B1 E1 D1 C1 E2 D2 C2 Dig.1 5.0 5.0 1 2 3 4 5 6 7 8 2.54✕7= 17.78 Segment name Internal connection diagram GL7❏208U 17 6.0 S GL3H412 D C 11 Dig.1 Dig.2 Dig.3 21 Internal connection diagram A B C D E F G D.P. 9 7 1 3 10 8 11 6 2 Dig.1 4 Dig.2 5 Dig.3 GL3❏306 Series GL3❏305 Series 2 Dig.1 4 Dig.2 5 Dig.3 U.C. F G B E D C D.P.1 L.C. D.P.2 D.P.3 1.5 Dig.1 Dig.2 Dig.3 Dig.4 12 Gl3❏412 Gl3❏411 A B C D E F G 1 8 1117 13 15 10 21 19 18 20 5 A B C D E F G 1 8 1117 13 15 10 21 19 18 20 5 GL3❏305 A B C D E F G D.P. 9 7 1 3 10 8 11 6 11 1 7 Internal connection diagram GL3❏306 (Notice) 1.5 1.5 1.5 6 Segment name A 21-ø0.45 2.54✕10=25.4 D.P. 1 A1 A2 F2 G1 B1 G2 B2 C1 E2 C2 D2 Dig2 D1 Dig1 1 0.5 14.3(Calking) 5 E1 0.5 8 16 F1 GL7R202 2.0 3.0 2.0 1 5.5 1 5 Luminous intensity rank 16 1514 13 121110 9 16-ø0.55 P20✕7=14.0 Dig.1 2.5 3 3 0.75(Segment width) 1 2 6 15.0 14.6 7.6 12.7 1 0.3(Space) 0.8.(Segment width) 4 10˚ 7.62 10 15 8 0.25 Dig.1 1 1 17.5(Calking) Internal connection diagram 20.1(Substrate) GL7❏206U GL3❏201 A1 B1 C1 D1 E1 F1 G1 2.54✕7=17.78 C-0.5 12 Internal connection diagram GL3❏202 16-ø0.55 ±10˚ 1.0 Segment name A1 A2 F2 F1 G1 B1 G2 B2 E2 E1 C2 D2 D1 C1 ±10˚ Dig.1 Dig.2 3 1.0t 3.85 10 12.7 3.0 3.0 4.2 3.0 1 2 3 4 5 6 7 8 16.0 0.5MAX. (Calking) 5.25 5.25 9-ø0.55 2.5 1.0(Segment width) 0.3(Space) 10.0 14.6 3.5 5.4 15.1 5.8 7.8 20.2 10˚ 5.8 14 1.0(Segment width) 4-0.5MAX (Calking) 15.0 14.6 10.0 Numeric LED 16 2 4 7 9 6 12 14 3 U.C. Dig.1 Dig.2 Dig.3 Dig.4 L.C. D.P.3 D.P.2 D.P.1 16 2 4 7 9 6 12 14 3 U.C. Dig.1 Dig.2 Dig.3 Dig.4 L.C. D.P.3 D.P.2 D.P.1 GL3❏412 Series GL3❏411 Series ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 150 (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) 1.0 11 0.3(for all space) 14.0 8.4 6.0 4.6 7.0 7.0 29.0 1 6.2 4.0 4.0 4.0 4.0 1.3 13.5 10 ø0.45 3.5 2.0 2.5 7.0 6-ø1.0 10˚ 20 3.81 0.3(Space) 4.4 0.85(for all segment width) 10.16 20 4.0 13.0 8.0 1.0(Segment width) 10˚ 9.2 19 Outline Dimensions(Unit:mm) 1.5 Numeric LED 30.0 Segment name & Pin No. Dig.1 Dig.2 Dig.3 Dig.4 P.16 P.9 S GL3P421 12-ø0.45 1.5 Internal connection diagram A B C D E F G D.P. 14 16 11 2 15 10 9 6 Dig.1 Dig.2 Dig.3 Dig.4 1 3 4 7 DP Alm GL3❏403 Dig.1 Dig.2 Dig.3 Dig.4 AMPM DP A B C D E F G UC LC Alm 20 1 8 14 13 4 3 18 15 11 16 5 10 7 2 17 6 12 9 19 DP Dig.1 Dig.3 Dig.2 Dig.4 AIm AM.PM 7 2 17 6 12 9 19 DP Dig.1 Dig.3 Dig.2 Dig.4 AIm AM.PM 1.0 2.42 12.58 ø0.45 15.0 7.6 3.4 1 5-ø0.9 0.5 7.0 7.0 7.0 7.0 42.5 Segment name A FG B E D C D.P. Dig.1 Dig.2 Dig.3 Dig.4 Dig.5 5.0 6.5 0.5 Internal connection diagram LC 0.3 for all space 10˚ 2.54✕12=30.48 B E D C GL3❏404 Series GL3❏403 Series 13 6.01 PM AMPM DP A B C D E F G UC LC Alm 20 1 8 14 13 4 3 18 15 11 16 5 10 GL3❏422 Series GL3❏421 Series 4.0 C GL3❏404 A B C D E F G D.P. 14 16 11 2 15 10 9 6 0.8(Segment width) F G P.7 GL3❏421 21 A UC B Internal connection diagram P.1 GL3❏422 1 3 4 7 AM 1.0 2.54✕9=22.86 A F G B E D C D.P. 2.54✕7=17.78 5.0 7.0 1.0 5.0 6.5 0.5 Segment name Dig.1 Dig.2 Dig.3 Dig.4 S GL3P404 1.0 6.01 GL3❏508D A B C D E F G D.P. 6 7 8 9 10111213 GL3❏507D A B C D E F G D.P. 6 7 8 9 10111213 5 Dig.1 4 Dig.2 3 Dig.3 2 Dig.4 1 Dig.5 5 Dig.1 4 Dig.2 3 Dig.3 2 Dig.4 1 Dig.5 GL3❏508D Series GL3❏507D Series ¡In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) ¡Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 151